A new impedance measurement method based on high frequency compensation

Impedance is very important in Micro-grid and other distributed power system based on power electronics because of the close relationship between impedance and stability. This paper presents a new current injection method for impedance measurement. Sinusoidal amplitude modulation is a method to shift signals to different frequency bands. A signal with large frequency bandwidth and small amplitude attenuation can be obtained by superposing square pulse signals after sinusoidal amplitude modulation. When the superposed signal is injected to the system as a current source, impedance information in the frequency range of interest can be calculated with short time cost and high accuracy. The simulation results demonstrate the effectiveness of this method.

[1]  Mark Sumner,et al.  System impedance measurement for use with active filter control , 2000 .

[2]  Jing Huang,et al.  Recurrent Neural Networks Based Impedance Measurement Technique for Power Electronic Systems , 2010, IEEE Transactions on Power Electronics.

[3]  J. P. Rhode,et al.  Line impedance measurement: a nondisruptive wideband technique , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[4]  Fred C. Lee,et al.  Impedance specifications for stable DC distributed power systems , 2002 .

[5]  Fang Zhuo,et al.  A new current injection method for impedance measurement using superposed modulated square pulse , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[6]  Min Chen,et al.  Aircraft power system harmonics involving single-phase PFC converters , 2008, IEEE Transactions on Aerospace and Electronic Systems.

[7]  R. B. McManis,et al.  Frequency Domain Techniques for Modeling Distribution or Transmission Networks Using Capacitor Switching Induced Transients , 1989, IEEE Power Engineering Review.

[8]  Fred C. Lee,et al.  Stability margin monitoring for DC distributed power systems via perturbation approaches , 2003 .

[9]  Jing Huang,et al.  Small-Signal Impedance Measurement of Power-Electronics-Based AC Power Systems Using Line-to-Line Current Injection , 2009, IEEE Transactions on Power Electronics.

[10]  Scott D. Sudhoff,et al.  Admittance space stability analysis of power electronic systems , 2000, IEEE Trans. Aerosp. Electron. Syst..

[11]  K.J. Karimi,et al.  Small-signal input impedance modeling of line-frequency rectifiers , 2008, IEEE Transactions on Aerospace and Electronic Systems.