Composite sandwich structures with nested inserts for energy absorption application

Abstract Polymer composite sandwich structures are promising candidate structures for reducing vehicle mass, thereby improving the fuel economics. Nonetheless, to fully explore this material as the primary structure and energy absorber in vehicles, it is important to understand the energy absorption capability of this material. Hence, in the present work, comprehensive experimental investigation on the response of composite sandwich structures to quasi-static compression has been carried out. The crashworthiness parameters, namely the peak force, absorbed crash energy, specific absorbed energy, average crushing force and crush force efficiency of various types of composite sandwich structures were investigated in a series of edgewise axial compression tests. The tested composite sandwich specimens were fabricated from glass and carbon fiber with epoxy resin. Four distinct modes of failure were observed and recorded. The primary mode of failure observed was progressive crushing with high energy absorption capability. The optimized design in this study had a specific energy absorption capability of 47.1 kJ/kg with a good crush force efficiency of 0.77, higher than conventional metals.

[1]  Dimitrios E. Manolakos,et al.  On the experimental investigation of crash energy absorption in laminate splaying collapse mode of FRP tubular components , 2005 .

[2]  Chris D. Rudd,et al.  Effect of resin properties and processing parameters on crash energy absorbing composite structures made by RTM , 2003 .

[3]  Tongxi Yu,et al.  Energy Absorption of Structures and Materials , 2003 .

[4]  Chunwei Zhang,et al.  Mechanical Properties and Energy Absorption Properties of Aluminum foam-filled Square Tubes , 2010 .

[5]  David P. Thambiratnam,et al.  Dynamic energy absorption characteristics of foam-filled conical tubes under oblique impact loading , 2010 .

[6]  Teuku Meurah Indra Mahlia,et al.  Load–displacement behavior of glass fiber/epoxy composite plates with circular cut-outs subjected to compressive load , 2010 .

[7]  M. B. Ioannidis,et al.  On the crushing response of composite sandwich panels subjected to edgewise compression: experimental , 2005 .

[8]  David P. Thambiratnam,et al.  Dynamic computer simulation and energy absorption of foam-filled conical tubes under axial impact loading , 2009 .

[9]  Athanasios G. Mamalis,et al.  Crashworthy capability of composite material structures , 1997 .

[10]  Shaker A. Meguid,et al.  On the crush behaviour of ultralight foam-filled structures , 2004 .

[11]  Elsadig Mahdi,et al.  Effect of hybridisation on crushing behaviour of carbon/glass fibre/epoxy circular-cylindrical shells , 2003 .

[12]  A. Hamouda,et al.  Quasi-static crushing behaviour of hybrid and non-hybrid natural fibre composite solid cones , 2004 .

[13]  Seeram Ramakrishna,et al.  Energy Absorption Characteristics of Crash Worthy Structural Composite Materials , 1997 .

[14]  Abdel Magid Hamouda,et al.  Crushing response of composite corrugated tubes to quasi-static axial loading , 2004 .

[15]  Shun Yi Jin,et al.  Energy absorption of aluminum foam filled braided stainless steel tubes under quasi-static tensile loading conditions , 2006 .

[16]  Wei Li,et al.  Crashworthiness design for foam filled thin-wall structures , 2009 .

[17]  Siavash Talebi Taher,et al.  A double-cell foam-filled composite block for efficient energy absorption under axial compression , 2009 .

[18]  Dimitrios E. Manolakos,et al.  On the response of thin-walled CFRP composite tubular components subjected to static and dynamic axial compressive loading: experimental , 2005 .

[19]  H. Kavi,et al.  Predicting energy absorption in a foam-filled thin-walled aluminum tube based on experimentally determined strengthening coefficient , 2006 .

[20]  Ermira Junita Abdullah,et al.  Nonlinear finite element analysis of axially crushed cotton fibre composite corrugated tubes , 2006 .

[21]  Elsadig Mahdi,et al.  Quasi-static axial crushing of segmented and non-segmented composite tubes , 2003 .

[22]  J. Carruthers,et al.  The influence of FRP inserts on the energy absorption of a foam-cored sandwich panel , 1997 .

[23]  P. Hamelin,et al.  Static and dynamic behavior of combined composite aluminium tube for automotive applications , 2000 .

[24]  Dimitrios E. Manolakos,et al.  Analytical modelling of the static and dynamic axial collapse of thin-walled fibreglass composite conical shells , 1997 .

[25]  David P. Thambiratnam,et al.  Crushing response of foam-filled conical tubes under quasi-static axial loading , 2009 .

[26]  Dimitrios E. Manolakos,et al.  Finite element simulation of the axial collapse of metallic thin-walled tubes with octagonal cross-section , 2003 .

[27]  A. S. Mokhtar,et al.  Many aspects to improve damage tolerance of collapsible composite energy absorber devices , 2005 .

[28]  Abdel Magid Hamouda,et al.  Experimental optimization of composite collapsible tubular energy absorber device , 2006 .

[29]  S. Ramakrishna.  MICROSTRUCTURAL DESIGN OF COMPOSITE MATERIALS FOR CRASHWORTHY STRUCTURAL APPLICATIONS , 1997 .

[30]  Abdel Magid Hamouda,et al.  An experimental investigation into crushing behaviour of filament-wound laminated cone-cone intersection composite shell , 2001 .

[31]  Homayoun Hadavinia,et al.  Experimental studies on fracture characterisation and energy absorption of GFRP composite box structures , 2009 .

[32]  Abbas Niknejad,et al.  Theoretical and experimental studies of the instantaneous folding force of the polyurethane foam-filled square honeycombs , 2011 .

[33]  Abdel Magid Hamouda,et al.  Experimental quasi-static axial crushing of cone–tube–cone composite system , 2003 .

[34]  Dimitrios E. Manolakos,et al.  Crashworthy characteristics of axially statically compressed thin-walled square CFRP composite tubes: experimental , 2004 .

[35]  A. Toksoy,et al.  Partial Al foam filling of commercial 1050H14 Al crash boxes: The effect of box column thickness and foam relative density on energy absorption , 2010 .

[36]  Dimitrios E. Manolakos,et al.  On the compression of hybrid sandwich composite panels reinforced with internal tube inserts: experimental , 2002 .

[37]  Dimitrios E. Manolakos,et al.  The static and dynamic axial collapse of CFRP square tubes : Finite element modelling , 2006 .