Design and fabrication of a foldable hexapod robot towards experimental swarm applications

This paper presents the development of a lightweight origami-inspired foldable hexapod robot. Using a single sheet of polyester and a laser cutter, the hexapod robot can be fabricated and assembled in less than one hour from scratch. No screw or other external tools are required for assembly. The robot has built-in polyester fasteners considered in its crease pattern. The design uses four-bar mechanisms, which makes the robot flexible to be adjusted for different speeds or other task metrics. For a given desired locomotion velocity, various parameters of the four-bar mechanisms in the crease pattern can be modified accordingly. Design flexibility, ease of fabrication, and low cost make the robot suitable as an agent for swarm objectives. This work presents the foldable hexapod design and its kinematic analysis. The robot is fabricated, assembled, and tested for functionality. Experimental results show that the robot prototype runs with a maximum forward speed of 5 body lengths per second and turns in place with a speed of 1 revolution per second. The final robot weighs 42 grams.

[1]  R. J. Wood,et al.  An Origami-Inspired Approach to Worm Robots , 2013, IEEE/ASME Transactions on Mechatronics.

[2]  Francis L. Merat,et al.  Introduction to robotics: Mechanics and control , 1987, IEEE J. Robotics Autom..

[3]  Ronald S. Fearing,et al.  RoACH: An autonomous 2.4g crawling hexapod robot , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[4]  Robert J. Wood,et al.  Biologically-inspired locomotion of a 2g hexapod robot , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[5]  Radhika Nagpal,et al.  Kilobot: A low cost scalable robot system for collective behaviors , 2012, 2012 IEEE International Conference on Robotics and Automation.

[6]  Ronald S. Fearing,et al.  Fast scale prototyping for folded millirobots , 2008, 2008 IEEE International Conference on Robotics and Automation.

[7]  Cagdas D. Onal,et al.  A lightweight modular 12-DOF print-and-fold hexapod , 2013, 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[8]  Robert J. Wood,et al.  Design and Fabrication of the Harvard Ambulatory Micro-Robot , 2009, ISRR.

[9]  E. Demaine,et al.  Self-folding with shape memory composites† , 2013 .

[10]  Ronald S. Fearing,et al.  DASH: A dynamic 16g hexapedal robot , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Robert J. Wood,et al.  HAMR3: An autonomous 1.7g ambulatory robot , 2011, 2011 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[12]  Robert J. Wood,et al.  Towards a 3g crawling robot through the integration of microrobot technologies , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[13]  Robert J. Wood,et al.  Robot self-assembly by folding: A printed inchworm robot , 2013, 2013 IEEE International Conference on Robotics and Automation.