Cost effective environmental control technology for utilities

Abstract On September 24, 1998, new regulations announced by the US EPA require 22 eastern states plus the District of Columbia to develop state implementation plans to reduce ground-level ozone through the reduction of nitrogen oxide (NOx) emissions ( Cooper, 1998 ). This plan calls for a 28% NOx cut in the summer time (1.2 million tons) by 2007. This calls for utilities to develop new, efficient, and robust post-combustion NOx control technologies. A new environmental control technology called low temperature oxidation (LTO) system, which can reduce NOx emissions below measurable levels (i.e. 2 ppm using process analyzers) at low temperature (125–325 °F), was awarded the best available control technology and the lowest available emission reduction technology by the US EPA in April 1998. Ozone is employed to oxidize nitric oxide (NO) to dinitrogen pentoxide (N 2 O 5 ) at a low temperature in an oxidizer, which is then easily absorbed by water in a scrubber. Bench scale and pilot plant tests have shown that the LTO process can almost completely remove the NOx emissions (i.e. NOx emissions are below levels measurable using process analyzers). This proved that the LTO system is an attractive process to meet the stricter NOx regulations. There are multiple benefits of the LTO system besides removal of NOx emissions, includes reduction of SOx and CO emissions, and no secondary air emissions (NH 3 , N 2 O). In order to obtain minimum NOx emissions, extra ozone needs to be supplied. The cost of the process also increases nonlinearly as emissions decrease. This poses a challenging multiobjective optimization problem where emissions like NOx and SOx need to be minimized, while minimizing the system cost as well as extra ozone. This problem is addressed using a new and efficient multiobjective optimization framework. This framework will provide designs that are cost effective as well as environmentally friendly.