Experimental diagnostic research of fixture

In the article the experimental research of the flexible fixture is shown, which provides sufficient accessibility and allows to perform multiaxis machining of parts, e.g. of levers with one setup. The experimental studies compared with the results of numerical simulation that were previously obtained, confirmed that the proposed fixture design meets all accuracy parameters. The results of experimental studies on the determination of displacements have shown that the values of displacements, determined statically, in the proposed fixtures are smaller than the dedicated ones. The analysis of the data of determination of the frequencies of the proper oscillations in the machining of the levers from steel and cast iron has confirmed that the first critical frequency of the fixture significantly exceeds the similar parameter of dedicated fixture.

[1]  Vitalii Oleksandrovych Ivanov,et al.  Mathematical Model of the Fixture Flexibility Impact on Machining Accuracy of Levers , 2016 .

[2]  [Intensification of manufacturing processes]. , 1952, Meditsinskaia promyshlennost' SSSR.

[3]  Z. M. Bi,et al.  Flexible fixture design and automation: Review, issues and future directions , 2001 .

[4]  K. P. Padmanaban,et al.  Machining Fixture Layout Design for Milling Operation Using FEA, ANN and RSM , 2012 .

[5]  Johan Stahre,et al.  A novel comparative design procedure for reconfigurable assembly fixtures , 2017 .

[6]  Yon-Chun Chou.  Automated Fixture Design for Concurrent Manufacturing Planning , 1993 .

[7]  Suman Gothwal,et al.  Different aspects in design and development of flexible fixtures: review and future directions , 2017 .

[8]  V. E. Karpus’,et al.  Universal-composite adjustable machine-tool attachments , 2008 .

[9]  Jiang-Liang Hou,et al.  Computer-aided fixture analysis using finite element analysis and mathematical optimization modeling , 1995 .

[10]  Heidar Hashemi,et al.  A case-based reasoning approach for design of machining fixture , 2014 .

[11]  Dragos Axinte,et al.  State-of-the-art in fixture systems for the manufacture and assembly of rigid components: A review , 2017 .

[12]  Vitalii Oleksandrovych Ivanov,et al.  Numerical simulation of the system “fixture–workpiece” for lever machining , 2017 .

[13]  Yiming Rong,et al.  Automated Generation of Fixture Configuration Design , 1997 .

[14]  Hua Li,et al.  Computer aided fixture design: Recent research and trends , 2010, Comput. Aided Des..