论文信息 - Processing of graphite-based sacrificial layer for microfabrication of low temperature co-fired ceramics (LTCC)

Processing of graphite-based sacrificial layer for microfabrication of low temperature co-fired ceramics (LTCC)

The processing and application of graphite powder-based sacrificial layer for fabrication of microfluidic structures in LTCC is described. Such layers are produced as pastes, which are screen-printed in LTCC sheets to avoid sagging, by supporting closed, three-dimensional structures such as channels, membranes during firing. The aim of the paper is to highlight the selection of paste materials and the effects of processing conditions on the fabricated microfluidic components. It is seen that the complete burnout of graphite powder is the most critical stage as it is in kinetic competition with the open pore-elimination process of LTCC, which occurs at 785 °C in our system.

[1] M. Eberstein,et al. Development of high-permittivity glasses for microwave LTCC tapes , 2003 .

[2] Jau-Ho Jean,et al. Cofiring Kinetics and Mechanisms of an Ag-Metallized Ceramic-Filled Glass Electronic Package , 2005 .

[3] Mario Ricardo Gongora-Rubio,et al. The utilization of low temperature co-fired ceramics (LTCC-ML) technology for meso-scale EMS, a simple thermistor based flow sensor , 1999 .

[4] Torsten Thelemann,et al. Using LTCC for microsystems , 2002 .

[5] Heli Jantunen,et al. A NOVEL LOW TEMPERATURE CO- FIRING CERAMIC (LTCC) MATERIAL FOR TELECOMMUNICATION DEVICES , 2001 .

[6] Mario Ricardo Gongora-Rubio,et al. Meso (Intermediate)-Scale Electromechanical Systems for the Measurement and Control of Sagging in LtcC Structures , 1998 .