Ablation mechanism of C/C–ZrB2–ZrC–SiC composite fabricated by polymer infiltration and pyrolysis with preform of Cf/ZrB2

[1]  Rongjun Liu,et al.  Ablation behavior and mechanism of C/ZrC, C/ZrC–SiC and C/SiC composites fabricated by polymer infiltration and pyrolysis process , 2014 .

[2]  S. Dong,et al.  Microstructures and ablation properties of 3D 4-directional Cf/ZrC–SiC composite in a plasma wind tunnel environment , 2014 .

[3]  Hejun Li,et al.  Ablation mechanism of SiC coated C/C composites at 0° angle in two flame conditions under an oxyacetylene flame , 2014 .

[4]  Hejun Li,et al.  Effect of SiC/ZrC ratio on the mechanical and ablation properties of C/C–SiC–ZrC composites , 2014 .

[5]  Hui‐Ming Cheng,et al.  Ablation and mechanical behavior of a sandwich-structured composite with an inner layer of Cf/SiC between two outer layers of Cf/SiC–ZrB2–ZrC , 2014 .

[6]  Hejun Li,et al.  Microstructure and ablation properties of carbon/carbon composites modified by ZrSiO4 , 2014 .

[7]  Qizhong Huang,et al.  Microstructure and ablation behavior of SiC coated C/C–SiC–ZrC composites prepared by a hybrid infiltration process , 2013 .

[8]  F. Qin,et al.  Oxidation kinetics and mechanisms of four-direction carbon/carbon composites and their components in carbon dioxide at high temperature , 2013 .

[9]  Hejun Li,et al.  Effect of heat flux on ablation behaviour and mechanism of C/C–ZrB2–SiC composite under oxyacetylene torch flame , 2013 .

[10]  Xiaohong Shi,et al.  Ablation in different heat fluxes of C/C composites modified by ZrB2–ZrC and ZrB2–ZrC–SiC particles , 2013 .

[11]  Junhua Zhang,et al.  Fabrication and properties of 2D C/C–ZrB2–ZrC–SiC composites by hybrid precursor infiltration and pyrolysis , 2013 .

[12]  Kezhi Li,et al.  Effects of porous C/C density on the densification behavior and ablation property of C/C–ZrC–SiC composites , 2013 .

[13]  Hejun Li,et al.  Ablation behavior and mechanism of C/C–ZrC–SiC composites under an oxyacetylene torch at 3000 °C , 2013 .

[14]  Xiaohong Shi,et al.  Effect of surface ablation products on the ablation resistance of C/C–SiC composites under oxyacetylene torch , 2013 .

[15]  S. Bai,et al.  C/C–ZrC composite prepared by chemical vapor infiltration combined with alloyed reactive melt infiltration , 2012 .

[16]  Hejun Li,et al.  Microstructure and ablation behaviors of integer felt reinforced C/C–SiC–ZrC composites prepared by a two-step method , 2012 .

[17]  Hejun Li,et al.  Effect of reaction melt infiltration temperature on the ablation properties of 2D C/C–SiC–ZrC composites , 2012 .

[18]  S. Dong,et al.  Fabrication and Properties of 3‐D Cf/SiC–ZrC Composites, Using ZrC Precursor and Polycarbosilane , 2012 .

[19]  Zhihua Yang,et al.  Oxidation of ZrC–30 vol% SiC composite in air from low to ultrahigh temperature , 2012 .

[20]  Lai-fei Cheng,et al.  Reaction kinetics and ablation properties of C/C–ZrC composites fabricated by reactive melt infiltration , 2011 .

[21]  William E Lee,et al.  Toward Oxidation-Resistant ZrB2-SiC Ultra High Temperature Ceramics , 2011 .

[22]  William E Lee,et al.  Reactive infiltration processing (RIP) of ultra high temperature ceramics (UHTC) into porous C/C composite tubes , 2011 .

[23]  Fei Deng,et al.  The effect of zirconium carbide on ablation of carbon/carbon composites under an oxyacetylene flame , 2011 .

[24]  Erica L. Corral,et al.  Improved ablation resistance of C–C composites using zirconium diboride and boron carbide , 2010 .

[25]  Lai-fei Cheng,et al.  Fabrication of 2D C/ZrC–SiC composite and its structural evolution under high-temperature treatment up to 1800 °C , 2009 .

[26]  S. Guo,et al.  Densification of ZrB2-based composites and their mechanical and physical properties: A review , 2009 .

[27]  Jingyi Deng,et al.  Comparison of thermal and ablation behaviors of C/SiC composites and C/ZrB2–SiC composites , 2009 .

[28]  Sufang Tang,et al.  Fabrication and Characterization of an Ultra‐High‐Temperature Carbon Fiber‐Reinforced ZrB2–SiC Matrix Composite , 2007 .

[29]  M. Weinmann,et al.  Fabrication of Fiber‐Reinforced Ceramic Composites by the Modified Slurry Infiltration Technique , 2007 .

[30]  T. Kosmač,et al.  Preparation and properties of C/C–SiC nano-composites , 2007 .

[31]  F. Christin.  Design, Fabrication, and Application of Thermostructural Composites (TSC) like C/C, C/SiC, and SiC/SiC Composites , 2002 .