Type synthesis of primitive Schoenflies-motion generators

A noteworthy type of motion called Schoenflies motion and often termed X-motion for brevity is presented. A specified set of X-motions is endowed with the algebraic structure of a four-dimensional (4D) Lie group. This 4D displacement Lie subgroup includes any translation and any rotation provided that the axis of rotation is parallel to a given direction. In the paper, some preliminary fundamentals about the Lie group of displacements are recalled; the 4D Lie subgroup of X-motion is emphasized. Then serial concatenations of one-dof Reuleaux pairs and hinged parallelograms lead to the enumeration of all possible general architectures of mechanical generators for a given X subgroup. Meanwhile, their corresponding embodiments are graphically displayed for a future use in the structural synthesis of parallel manipulators. These generators are sorted into four classes based on the number of prismatic pairs. In total, forty-three distinct mechanical generators of X-motion are revealed and eighty-two ones having at least one parallelogram are also derived from them. Some chains that are defective generators of X-motion are also identified through an approach based on the group dependency.

[1]  J. M. Selig Geometrical Foundations of Robotics , 2000 .

[2]  Jacques M. Hervé,et al.  The mathematical group structure of the set of displacements , 1994 .

[3]  Zexiang Li,et al.  A Geometric Theory for Analysis and Synthesis of Sub-6 DoF Parallel Manipulators , 2007, IEEE Transactions on Robotics.

[4]  A. Schoenflies,et al.  Geometrie der Bewegung in synthetischer Darstellung , 1886 .

[5]  A. Schoenflies,et al.  La géométrie du mouvement : exposé synthétique , .

[6]  J. Hervé Analyse structurelle des mcanismes par groupe des dplacements , 1978 .

[7]  J. M. Hervé,et al.  Structural synthesis of 'parallel' robots generating spatial translation , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[8]  Janusz,et al.  Geometrical Methods in Robotics , 1996, Monographs in Computer Science.

[9]  Adolf Karger,et al.  Space kinematics and Lie groups , 1985 .

[10]  Jacques M. Hervé,et al.  PARALLEL MECHANISMS with PSEUDO-PLANAR MOTION GENERATORS , 2004 .

[11]  F. E. Myard Contribution à la géométrie des systèmes articulés , 1931 .

[12]  José María Rico Martínez,et al.  On Mobility Analysis of Linkages Using Group Theory , 2003 .

[13]  J. M. Hervé The Lie group of rigid body displacements, a fundamental tool for mechanism design , 1999 .

[14]  A. Hernández,et al.  Synthesis and Design of a Novel 3T1R Fully-Parallel Manipulator , 2008 .

[15]  C. Barus A treatise on the theory of screws , 1998 .

[16]  The theory of groups , 1968 .

[17]  J. M. Hervé Intrinsic formulation of problems of geometry and kinematics of mechanisms , 1982 .

[18]  Jacques M. Hervé,et al.  Discontinuously Movable Seven-Link Mechanisms Via Group-Algebraic Approach , 2005 .