A review of directionally solidified intermetallic composites for high-temperature structural applications

[1]  G. Pharr,et al.  Directional solidification and microstructures of near-eutectic Cr–Cr3Si alloys , 2003 .

[2]  M. Yamaguchi,et al.  Room temperature fracture toughness and high temperature strength of T2/Moss and (Mo,Nb)ss/T1/T2 eutectic alloys in the Mo–Si–B system , 2003 .

[3]  G. Pharr,et al.  Microstructure and Thermal Stability of Lamellar Cr-Silicides , 2003 .

[4]  G. Pharr,et al.  Effects of composition on lamellar microstructures of near-eutectic Cr–Cr3Si alloys , 2003 .

[5]  E. George,et al.  Effects of processing on the microstructure and mechanical behavior of binary Cr–Ta alloys , 2002 .

[6]  C. T. Ríos,et al.  Influence of the growth rate on the microstructure of a Nb-Al-Ni ternary eutectic , 2002 .

[7]  S. David,et al.  Characterization of the microstructure evolution in a nickel base superalloy during continuous cooling conditions , 2001 .

[8]  P. Peralta,et al.  Mo5Si3 single crystals: Physical properties and mechanical behavior , 1999 .

[9]  R. Caram,et al.  Microstructure of Ni–Ni3Si eutectic alloy produced by directional solidification , 1999 .

[10]  W. Jie,et al.  Effect of weak convection on lamellar spacing of eutectics , 1998 .

[11]  B. Murty,et al.  Novel materials synthesis by mechanical alloying/milling , 1998 .

[12]  G. Henshall,et al.  Ductile-phase toughening in V-V3Si in situ composites , 1997 .

[13]  A. Misra,et al.  Microstructures and mechanical properties of directionally solidified NiAl-Mo and NiAl-Mo(Re) eutectic alloys , 1997 .

[14]  S. David,et al.  Microstructural development in single crystal nickel base superalloy welds , 1997 .

[15]  D. Schwartz,et al.  High-temperature ordered intermetallic alloys VI: Part 1. Materials Research Society symposium proceedings Volume 364 , 1995 .

[16]  X. F. Chen,et al.  Fracture behavior of directionally solidified NiAl-Mo and NiAl-V eutectics , 1995 .

[17]  R. Jayaram,et al.  Influence of phase composition and microstructure on the high temperature creep properties of a model single crystal nickel-base superalloy: An atom probe/AEM study , 1995 .

[18]  B. Bewlay,et al.  Solidification processing of high temperature intermetallic eutectic-based alloys , 1995 .

[19]  D. R. Johnson,et al.  Processing and mechanical properties of in-situ composites from the NiAlCr and the NiAl(Cr,Mo) eutectic systems , 1995 .

[20]  D. Miracle,et al.  Microstructures and mechanical behavior of NiAl-Mo and NiAl-Mo-Ti two-phase alloys , 1994 .

[21]  R. Jayaram,et al.  APFIM characterization of single-crystal PWA 1480 nickel-base superalloy , 1994 .

[22]  B. Bewlay,et al.  Processing, Microstructures, and Properties of Cr-Cr3Si, Nb-Nb3Si, and V-V3Si Eutectics , 1994 .

[23]  R. Fleischer.  Substitutional solutes in the laves phase intermetallic compounds Cr2Zr and Cu2Mg—solution hardening and defect structures , 1992 .

[24]  Charles H. Henager,et al.  Synthesis of a MoSi2SiC composite in situ using a solid state displacement reaction , 1992 .

[25]  J. Tien,et al.  High temperature strength of niobium aluminide intermetallics , 1992 .

[26]  A. Evans,et al.  High temperature/high performance composites , 1991 .

[27]  R. Fleischer,et al.  Elastic moduli of polycrystalline, high-temperature binary intermetallic compounds , 1989 .

[28]  J. Hirth,et al.  Internal oxidation of Ag-in alloys: Stress relief and the influence of imposed strain , 1986 .

[29]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[30]  C. T. Liu,et al.  High-temperature ordered intermetallic alloys , 1985 .

[31]  H. E. Boyer,et al.  Metals handbook; desk edition , 1985 .

[32]  W. Wilcox,et al.  Influence of convection on lamellar spacing of eutectics , 1984 .

[33]  M. Glicksman,et al.  Effects of forced convection flow on directional solidification of Pb-Sn and Cd-Zn eutectic alloys , 1983 .

[34]  R. Naslain,et al.  Effect of forced convection on eutectic growth , 1981 .

[35]  G. V. Samsonov,et al.  Handbook of Refractory Compounds , 1980 .

[36]  H. Ehrenreich,et al.  Theory of alloy phases , 1977 .

[37]  H. Cline,et al.  Structures, faults, and the rod-plate transition in eutectics , 1971 .

[38]  B. Chalmers.  Principles of Solidification , 1964 .