The synthesis of planar parallel manipulators with prismatic joints for an optimal, singularity-free workspace

The synthesis of three-degree-of-freedom planar parallel manipulators is performed using a genetic algorithm. The architecture of a manipulator and its position and orientation with respect to a prescribed workspace are determined. The architectural parameters are optimized so that the manipulator's constant-orientation workspace is as close as possible to a prescribed workspace. The manipulator's workspace is discretized and its dexterity is computed as a global property of the manipulator. An analytical expression of the singularity loci (local null dexterity) can be obtained from the Jacobian matrix determinant, and its intersection with the manipulator's workspace may be verified and avoided. Results are shown for different conditions. First, the manipulators' workspaces are optimized for a prescribed workspace, without considering whether the singularity loci intersect it or not. Then the same type of optimization is performed, taking intersections with the singularity loci into account. In the following results, the optimization of the manipulator's dexterity is also included in an objective function, along with the workspace optimization and the avoidance of singularity loci. Results show that the end-effector's location has a significant effect on the manipulator's dexterity. © 2002 John Wiley & Sons, Inc.

[1]  C. Gosselin.  Determination of the Workspace of 6-DOF Parallel Manipulators , 1990 .

[2]  Clément Gosselin,et al.  The Synthesis of Planar Parallel Manipulators with a Genetic Algorithm , 1999 .

[3]  S. Bhattacharya,et al.  Comparison of an exact and an approximate method of singularity avoidance in platform type parallel manipulators , 1998 .

[4]  Roger Boudreau,et al.  Solving the forward kinematics of parallel manipulators with a genetic algorithm , 1996, J. Field Robotics.

[5]  Clément Gosselin,et al.  The Synthesis of Manipulators with Prescribed Workspace , 1991 .

[6]  Alden H. Wright,et al.  Genetic Algorithms for Real Parameter Optimization , 1990, FOGA.

[7]  Clément Gosselin,et al.  Singularity analysis and representation of planar parallel manipulators , 1992, Robotics Auton. Syst..

[8]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[9]  Andrew P. Murray,et al.  A planar quaternion approach to the kinematic synthesis of a parallel manipulator , 1997, Robotica.

[10]  Clément Gosselin,et al.  A Global Performance Index for the Kinematic Optimization of Robotic Manipulators , 1991 .

[11]  Jean-Pierre Merlet,et al.  Designing a Parallel Manipulator for a Specific Workspace , 1997, Int. J. Robotics Res..

[12]  John Bares,et al.  Automated synthesis and optimization of robot configurations: an evolutionary approach , 1999 .

[13]  Clément Gosselin,et al.  Workspaces of Planar Parallel Manipulators , 1998 .

[14]  C. Gosselin,et al.  On the quadratic nature of the singularity curves of planar three-degree-of-freedom parallel manipulators , 1995 .

[15]  Clément Gosselin,et al.  Singularity analysis of closed-loop kinematic chains , 1990, IEEE Trans. Robotics Autom..