Elastic mesh technique for 3D BIM simulation with an application to underwater explosion bubble dynamics

Abstract The proposed elastic mesh technique (EMT) is a mesh regulation technique, which is based on the assumption that the segments of a mesh are elastic. EMT can be employed in conjunction with the boundary integral method (BIM) for the simulation of three-dimension bubble dynamics in which problems relating to severe mesh distortion as the bubble evolves are a common occurrence. With EMT, the mesh is advanced not by the material velocity, but the optimum shift velocity obtained by minimizing the total elastic energy stored in every segment of the mesh at each time step. In doing so, the prohibitively small time stepping associated with small meshes without EMT in order to maintain numerical stability is mitigated to a large extent. An important feature is that the EMT scheme accords the user the flexibility to implement a non-uniform optimum constitutive relation governing the elastic behavior of mesh segment and which can be further varied with time. Tests were performed for an underwater explosion bubble exhibiting the dynamics of strong jet development with and without EMT for comparison, and the consideration of incorporating EMT as a hybrid system serving as an alternative to the required mesh refinement which is computationally intensive. A full three-dimension simulation of explosion bubble(s) and in the presence of the free surface were further carried out to elucidate the associated flow physics.

[1]  Paul Harris,et al.  A numerical model for determining the motion of a bubble close to a fixed rigid structure in a fluid , 1992 .

[2]  Jay P. Boris,et al.  The Lagrangian solution of transient problems in hydrodynamics using a triangular mesh , 1979 .

[3]  John R. Blake,et al.  Acoustic cavitation: the fluid dynamics of non–spherical bubbles , 1999, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[4]  R. P. Tong.  A new approach to modelling an unsteady free surface in boundary integral methods with application to bubble-structure interactions , 1997 .

[5]  Yanzhi Zhang,et al.  SIMULATION OF THREE-DIMENSIONAL BUBBLES USING DESINGULARIZED BOUNDARY INTEGRAL METHOD , 1999 .

[6]  Vittorio Cristini,et al.  Drop breakup in three-dimensional viscous flows , 1998 .

[7]  John R. Blake,et al.  Cavitation Bubbles Near Boundaries , 1987 .

[8]  Qian Wang,et al.  Nonlinear interaction between gas bubble and free surface , 1996 .

[9]  E. J. Hinch,et al.  Numerical simulation of a concentrated emulsion in shear flow , 1996, Journal of Fluid Mechanics.

[10]  Alexander Z. Zinchenko,et al.  A novel boundary-integral algorithm for viscous interaction of deformable drops , 1997 .

[11]  K. Yeo,et al.  Three-Dimensional Computation of Bubbles Near a Free Surface , 1998 .

[12]  S. Osher,et al.  A level set approach for computing solutions to incompressible two-phase flow , 1994 .

[13]  James A. Sethian,et al.  Level Set Methods and Fast Marching Methods: Evolving Interfaces in Computational Geometry, Fluid , 2012 .

[14]  Y. L. Zhang,et al.  3D Impact and Toroidal Bubbles , 2001 .