ANALYSIS OF PARALLELIZATION EFFICIENCY OF COUPLED THERMO-HYDRO-MECHANICAL SIMULATION

This paper focuses on the computational efficiency of parallelized finite element method (FEM) for coupled thermo-hydro-mechanical (THM) problems. The numerical analysis of THM coupled problems in porous media is an important subject for many geo-engineering tasks such as engineering of geothermal reservoirs, nuclear waste management and CO2 sequestration. However its calculation is computationally very expensive. Improvement of the computation time is required to expand applicability of the method. Parallel computing is one of the ways to provide it speed-up. In this study, parallelization efficiency on solving the coupled THM problems is presented with several simple tests as well as an application to a three dimensional geothermal reservoir modeling. Tests were conducted using a parallelized FEM code, GeoSys/Rockflow, and a Linux cluster system, LiClus at UFZ. Results show that the parallel computation scheme effectively reduces the calculation time for solving coupled THM problems. It was also found that its parallelization could affect solver behavior. Reducing communication time between cluster nodes is desired to use parallel computing more efficiently.

[1]  Thomas Kohl,et al.  Coupled thermal–hydraulic–chemical modelling of enhanced geothermal systems , 2005 .

[2]  J. Willis-Richards,et al.  Approaches to the modelling of hdr reservoirs: A review , 1995 .

[3]  Olaf Kolditz,et al.  Numerical modeling of stress-permeability coupling in rough fractures , 2008 .

[4]  Christoph Clauser,et al.  Numerical simulation of reactive flow in hot aquifers : SHEMAT and processing SHEMAT , 2003 .

[5]  G. Zyvoloski,et al.  A numerical model for thermo-hydro-mechanical coupling in fractured rock , 1997 .

[6]  D. Bruel.  Modelling heat extraction from forced fluid flow through stimulated fractured rock masses: evaluation of the soultz-sous-forets site potential , 1995 .

[7]  Olaf Kolditz,et al.  A parallel finite element scheme for thermo-hydro-mechanical (THM) coupled problems in porous media , 2009, Comput. Geosci..

[8]  Michael O'Sullivan,et al.  State-of-the-art of geothermal reservoir simulation , 2001 .

[9]  Karsten Pruess,et al.  Thermal–hydrodynamic–chemical (THC) modeling based on geothermal field data , 2004 .

[10]  D. Gawin,et al.  Two Parallel Computing Methods for Coupled Thermohydromechanical Problems , 2000 .

[11]  Vipin Kumar,et al.  A Parallel Algorithm for Multilevel Graph Partitioning and Sparse Matrix Ordering , 1998, J. Parallel Distributed Comput..

[12]  Jonny Rutqvist,et al.  DECOVALEX-THMC Task D: Long-Term Permeability/Porosity Changes in the EDZ and Near Field due to THM and THC Processes in Volcanic and Crystaline-Bentonite Systems, Status Report October 2005 , 2005 .

[13]  O. Kolditz,et al.  3-D numerical evaluation of density effects on tracer tests. , 2005, Journal of contaminant hydrology.

[14]  Olaf Kolditz,et al.  Geomechanical model for fracture deformation under hydraulic, mechanical and thermal loads , 2006 .

[15]  B. Schrefler,et al.  The Finite Element Method in the Static and Dynamic Deformation and Consolidation of Porous Media , 1998 .

[16]  T. Kohl,et al.  Modellsimulation gekoppelter Vorgänge beim Wärmeentzug aus heissem Tiefengestein , 1992 .

[17]  George A. Zyvoloski,et al.  FEHMN 1.0: Finite element heat and mass transfer code , 1991 .

[18]  Thomas Kohl,et al.  Coupled hydraulic, thermal and mechanical considerations for the simulation of hot dry rock reservoirs , 1995 .

[19]  E. E. Alonsoa,et al.  The FEBEX benchmark test: case definition and comparison of modelling approaches , 2005 .

[20]  Olaf Kolditz,et al.  Object‐oriented finite element analysis of thermo‐hydro‐mechanical (THM) problems in porous media , 2007 .

[21]  Olaf Kolditz,et al.  Simulation of heat extraction from crystalline rocks: The influence of coupled processes on differential reservoir cooling , 2006 .

[22]  Olaf Kolditz,et al.  Results from an International Simulation Study on Coupled Thermal, Hydrological, and Mechanical Processes near Geological Nuclear Waste Repositories , 2008 .

[23]  Chin-Fu Tsang,et al.  Coupled hydromechanical‐thermochemical processes in rock fractures , 1991 .

[24]  Genki Yagawa,et al.  Large‐scale parallel finite‐element analysis using the internet: a performance study , 2005 .

[25]  Tayfun E. Tezduyar,et al.  Parallel finite element computations in fluid mechanics , 2006 .

[26]  R. de Boer,et al.  Trends in Continuum Mechanics of Porous Media , 2005 .

[27]  Asad I. Khan,et al.  Parallel Finite Element Computations , 1999 .

[28]  Chin-Fu Tsang,et al.  Coupled thermal-hydraulic-mechanical phenomena in saturated fractured porous rocks: numerical approach , 1984 .

[29]  Wenqing Wang,et al.  PARALLELIZATION CONCEPTS AND APPLICATIONS FOR THM COUPLED FINITE ELEMENT PROBLEMS , 2008 .

[30]  John A. Hudson,et al.  Coupled thermo-hydro-mechanical processes in geo-systems : fundamentals, modelling, experiments, and applications , 2004 .

[31]  C. Doughty,et al.  Modeling Supercritical Carbon Dioxide Injection in Heterogeneous Porous Media , 2004, Vadose Zone Journal.

[32]  O. Kolditz.  Non‐linear flow in fractured rock , 2001 .