Coupled heat and moisture transport in damaged concrete under an atmospheric environment

Abstract This paper presents thermogradient and hygrogradient coefficients as indicators for evaluation of coupled effects of heat and moisture transport in concrete. A numerical model for coupled heat and moisture transport was established and solved as well as a method to determine thermogradient and hygrogradient coefficients. Effects of temperature and humidity gradients were investigated through experiments, which covered also the effects of damage on moisture transport, temperature and humidity distributions along with coupled transport. The experimental results showed that temperature and humidity gradients accelerated moisture transport along with increased damage. In addition, the effect of temperature gradient on temperature distributions was significant, while the effect of humidity gradient was small. However, both temperature and humidity gradients had significant effects on relative humidity distributions. Hence, coupled heat and moisture transport in concrete had a significant effect on moisture transport, and the effect of damage on moisture transport must be considered when determining humidity field in damaged concrete.

[1]  L. Greenspan.  Humidity Fixed Points of Binary Saturated Aqueous Solutions , 1977, Journal of Research of the National Bureau of Standards. Section A, Physics and Chemistry.

[2]  Menghao Qin,et al.  Simulation of whole building coupled hygrothermal-airflow transfer in different climates , 2011 .

[3]  Yunping Xi,et al.  Mesoscale model for thermal conductivity of concrete , 2015 .

[4]  Cheng-I Weng,et al.  An analytical solution to coupled heat and moisture diffusion transfer in porous materials , 2000 .

[5]  E. Samson,et al.  Modeling the Effect of Temperature on Ionic Transport in Cementitious Materials , 2007 .

[6]  Cruz Alonso,et al.  Corrosion rate evolution in concrete structures exposed to the atmosphere , 2002 .

[7]  Xianglin Gu,et al.  Basic Principles of Concrete Structures , 2015 .

[8]  P. Liu,et al.  Quantitative moisture model of interior concrete in structures exposed to natural weather , 2016 .

[9]  A. Luikov,et al.  Theory of energy and mass transfer , 1961 .

[10]  Suwito,et al.  Damage Theory Based on Composite Mechanics , 2006 .

[11]  Mickaël Thiery,et al.  Modelling of isothermal coupled moistureion transport in cementitious materials , 2011 .

[12]  Lars-Olof Nilsson,et al.  Experimental and theoretical investigation of non-isothermal transfer in hygroscopic building materials , 2008 .

[13]  Robert Černý,et al.  The effects of thermal load and frost cycles on the water transport in two high-performance concretes , 2001 .

[14]  Ying Chen,et al.  Temperature response in concrete under natural environment , 2015 .

[15]  C. Hall,et al.  Water sorptivity of mortars and concretes: a review , 1989 .

[16]  P. Henry.  DIFFUSION IN ABSORBING MEDIA , 1986 .

[17]  A. Wexler,et al.  Relative humidity-temperature relationships of some saturated salt solutions in the temperature range 0 degree to 50 degrees C , 1954 .

[18]  A. Luikov.  Heat and Mass Transfer in Capillary-Porous Bodies , 2014 .

[19]  A. Aït‐Mokhtar,et al.  An analytical method to calculate the coupled heat and moisture transfer in building materials , 2006 .

[20]  Yuan Ying-shu,et al.  Action spectrum of temperature in natural climate environment and prediction of temperature response in concrete , 2009 .

[21]  L. Guang.  Summary of Coupled Temperature and Moisture Transfer of Concrete , 2003 .

[22]  Renato Vitaliani,et al.  The carbonation of concrete and the mechanism of moisture, heat and carbon dioxide flow through porous materials , 1993 .

[23]  R. Belarbi,et al.  Nonisothermal moisture transport in hygroscopic building materials: modeling for the determination of moisture transport coefficients , 2008 .

[24]  Fraunhofer-Institut für Bauphysik,et al.  Simultaneous heat and moisture transport in building components: One- and two-dimensional calculation using simple parameters , 1995 .

[25]  Tetsuya Ishida,et al.  Modeling of chloride transport coupled with enhanced moisture conductivity in concrete exposed to marine environment , 2009 .

[26]  Y. Xi,et al.  Composite Damage Models for Diffusivity of Distressed Materials , 2005 .

[27]  Theodore W. Bremner,et al.  Moisture and Heat Flow in Concrete Walls Exposed to Fire , 1994 .

[28]  J. R. Philip,et al.  Moisture movement in porous materials under temperature gradients , 1957 .

[29]  T. Liu,et al.  Modeling the Dynamic Corrosion Process in Chloride Contaminated Concrete Structures , 1998 .

[30]  Shahryar Motakef,et al.  Unsteady heat and mass transfer with phase change in porous slabs: analytical solutions and experimental results , 1990 .

[31]  S. Sture,et al.  Modeling of Moisture Diffusivity of Concrete at Low Temperatures , 2013 .

[32]  R. Belarbi,et al.  Two-dimensional hygrothermal transfer in porous building materials , 2010 .

[33]  Menghao Qin.  Whole-building heat, air, and moisture transfer modeling for residential buildings in different climates , 2011 .

[34]  Shahryar Motakef,et al.  Simultaneous heat and mass transfer with phase change in a porous slab , 1986 .

[36]  Lars-Olof Nilsson,et al.  Coupled heat and moisture transfer in multi-layer building materials , 2009 .

[37]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[38]  Xianglin Gu,et al.  Temperature response and moisture transport in damaged concrete under an atmospheric environment , 2016 .

[39]  Chris J. Pearce,et al.  Coupled Heat and Moisture Transport in Concrete at Elevated Temperatures—Effects of Capillary Pressure and Adsorbed Water , 2006 .