Heat Transfer Enhancement—The Encouragement and Accommodation of High Heat Fluxes

This review considers the many techniques that have been developed to enhance convective heat transfer. After introducing the techniques, the applications to most of the modes of heat transfer (single-phase forced convection, including compound techniques, pool boiling, convective boiling/evaporation, vapor-space condensation, and convective condensation) are described. Comments are offered regarding commercial introduction of this technology and the generations of heat transfer technology : advanced enhancement represents third-generation heat transfer tehnology.

[1]  J. Thome Enhanced Boiling Heat Transfer , 1990 .

[2]  Arthur E. Bergles,et al.  Heat Transfer Enhancement—The Maturing of Second-Generation Heat Transfer Technology , 1997 .

[3]  S. M. You,et al.  Painting technique to enhance pool boiling heat transfer in saturated FC-72 , 1995 .

[4]  R. M. Manglik,et al.  Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part I—Laminar Flows , 1993 .

[5]  R. M. Manglik,et al.  Heat Transfer and Pressure Drop Correlations for Twisted-Tape Inserts in Isothermal Tubes: Part II—Transition and Turbulent Flows , 1993 .

[6]  R. M. Manglik,et al.  Heat transfer and pressure drop correlations for the rectangular offset strip fin compact heat exchanger , 1995 .

[7]  R. L. Webb,et al.  Heat transfer enhancement: second generation technology , 1983 .

[8]  M. Pate,et al.  In-tube heat transfer and pressure drop of R-134a and ester lubricant mixtures in a smooth tube and a micro-fin tube. Part 2: Condensation , 1994 .

[9]  Cristina H. Amon Spectral element-Fourier method for transitional flows in complex geometries , 1993 .

[10]  V. Dhir BOILING HEAT TRANSFER , 1998 .

[11]  C. Gau,et al.  Impingement cooling flow structure and heat transfer along rib-roughened walls , 1992 .

[12]  W. McGillis,et al.  On the Role of Marangoni Effects on the Critical Heat Flux for Pool Boiling of Binary Mixtures , 1996 .

[13]  A. Bergles,et al.  Enhancement of Heat Transfer and Fouling Mitigation , 1997 .

[14]  Nesreen Ghaddar,et al.  RESONANT CONVECTIVE HEAT TRANSFER IN GROOVED CHANNELS , 1986 .

[15]  R. Shah,et al.  Heat transfer surface enhancement through the use of longitudinal vortices: a review of recent progress , 1995 .

[16]  Anthony M. Jacobi,et al.  Evaluating the potential of vortex-enhanced evaporator performance for refrigeration applications , 1996 .

[17]  Arthur E. Bergles,et al.  Some perspectives on enhanced heat transfer: second-generation heat transfer technology , 1988 .

[18]  Wataru Nakayama,et al.  Optimized Performance of Condensers with Outside Condensing Surfaces , 1981 .

[19]  M. Greiner An experimental investigation of resonant heat transfer enhancement in grooved channels , 1991 .

[20]  Heat transfer enhancement of laminar and turbulent pipe flow via corona discharge , 1991 .

[21]  Y. Bayazitoglu,et al.  Enhancement of heat transfer in square helical ducts , 1994 .

[22]  Wen‐Jei Yang,et al.  Nucleate Pool Boiling on Micro Graphite–Copper Composite Surfaces , 1996 .

[23]  P. J. Marto,et al.  Nucleate pool boiling of R-114 and R-114-oil mixtures from smooth and enhanced surfaces—I. Single tubes , 1995 .

[24]  J. Kelly,et al.  Spray evaporation heat transfer performance in R-123 in tube bundles , 1996 .

[25]  W. Fritz,et al.  Versuche über den verdampfungsvorgang , 1931 .

[26]  Ampere A. Tseng,et al.  Cooling of a moving plate with an impinging circular water jet , 1991 .

[27]  Rakesh K. Singh,et al.  MATHEMATICAL MODELS OF SCRAPED-SURFACE HEAT EXCHANGERS IN RELATION TO FOOD STERILIZATION† , 1990 .