A new dielectric bolometer mode of detector pixel for uncooled infrared image sensor with ferroelectric bst thin film prepared by metal-organic decomposition

Abstract A Ba1−xSrxTO3(Bi/Sr=75/25) ferroelectric thin film for detector pixel of uncooled infrared (IR) image sensor was prepared by metalorganic decomposition (MOD) with final annealing at 700 to 800°C. The films electrical characteristics such as temperature dependence of capacitance and insulation are very good from the viewpoints of spatial uniformity and stability against thermal cycling. The MOD film was applied to our proposed dielectric bolometer (DB) mode cf IR detector that has merits in 1) room temperature operation, 2) chopperless, 3) low power dissipation, and 4) high sensitivity. Finally, the DB-mode operation in the detector pixel was confirmed on the integrated device structure, and the resultant voltage sensitivity (Rv) and specific detectivity (D*) were observed to be 0.4 kV/W and 9.8×107 cmHzl/2/W with noise voltage (Vn) of 100 nV, respectively, where the detector size was 200μm2. Excellent output linearity against IR power down to 0.5 mW/cm2 and an IR image from IR source with average power of 6 mW/cm2. were also obtained.