Performance of Kitt Peak’s Mayall 4-meter telescope during DESI commissioning

In preparation for the Dark Energy Spectroscopic Instrument (DESI), a new top end was installed on the Mayall 4-meter telescope at Kitt Peak National Observatory. The refurbished telescope and the DESI instrument were successfully commissioned on sky between 2019 October and 2020 March. Here we describe the pointing, tracking and imaging performance of the Mayall telescope equipped with its new DESI prime focus corrector, as measured by six guider cameras sampling the outer edge of DESI’s focal plane. Analyzing ~500,000 guider images acquired during commissioning, we find a median delivered image FWHM of 1.1 arcseconds (in the r-band at 650 nm), with the distribution extending to a best-case value of ~0.6 arcseconds. The point spread function is well characterized by a Moffat profile with a power-law index of β ≈ 3.5 and little dependence of β on FWHM. The shape and size of the PSF delivered by the new corrector at a field angle of 1.57 degrees are very similar to those measured with the old Mayall corrector on axis. We also find that the Mayall achieves excellent pointing accuracy (several arcseconds RMS) and minimal open-loop tracking drift (< 1 milliarcsecond per second), improvements on the telecope’s pre-DESI performance. In the future, employing DESI’s active focus adjustment capabilities will likely further improve the Mayall/DESI delivered image quality.

[1]  Adam D. Myers,et al.  Overview of the DESI Legacy Imaging Surveys , 2018, The Astronomical Journal.

[2]  Ray M. Sharples,et al.  DESI installation: preparations and progress (Conference Presentation) , 2018, Ground-based and Airborne Telescopes VII.

[3]  Giuseppe Gallo,et al.  As-built new Mayall telescope top end for the DESI project , 2018, Astronomical Telescopes + Instrumentation.

[4]  Kai Zhang,et al.  Dark energy spectroscopic instrument (DESI) fiber positioner production , 2018, Astronomical Telescopes + Instrumentation.

[5]  Paul Martini,et al.  The commissioning instrument for the dark energy spectroscopic instrument , 2018, Astronomical Telescopes + Instrumentation.

[6]  Michael J. Sholl,et al.  Fabrication of the DESI corrector lenses , 2018, Astronomical Telescopes + Instrumentation.

[7]  M. Levi,et al.  The DESI instrument control systems: status and early testing , 2018, Astronomical Telescopes + Instrumentation.

[8]  Richard Joyce,et al.  Overview of the Dark Energy Spectroscopic Instrument , 2018, Astronomical Telescopes + Instrumentation.

[9]  Michael J. Sholl,et al.  The DESI Experiment Part II: Instrument Design , 2016, 1611.00037.

[10]  David R. Silva,et al.  The DESI Experiment Part I: Science,Targeting, and Survey Design , 2016, 1611.00036.

[11]  R. Casas,et al.  DESI-GFA testbench facilities for CCDs characterization , 2016, Astronomical Telescopes + Instrumentation.

[12]  Rolando Cantarutti,et al.  Modernization of the Mayall Telescope control system: design, implementation, and performance , 2016, Astronomical Telescopes + Instrumentation.

[13]  Rolando Cantarutti,et al.  A new telescope control software for the Mayall 4-meter telescope , 2016, Astronomical Telescopes + Instrumentation.

[14]  Aaron Roodman,et al.  Wavefront sensing and the active optics system of the dark energy camera , 2014 .

[15]  David Schlegel,et al.  The DESI Experiment, a whitepaper for Snowmass 2013 , 2013, 1308.0847.

[16]  A. Dey,et al.  The Delivered Image Quality with the MOSAIC Cameras at the Kitt Peak 4 m Mayall and Cerro Tololo 4 m Blanco Telescopes , 2014 .

[17]  Chris Bebek,et al.  Design and performance of an R-θ fiber positioner for the BigBOSS instrument , 2012, Other Conferences.

[18]  A. Moffat A Theoretical Investigation of Focal Stellar Images in the Photographic Emulsion and Application to Photographic Photometry , 1969 .