Selective Ion Transporting Polymerized Ionic Liquid Membrane Separator for Enhancing Cycle Stability and Durability in Secondary Zinc-Air Battery Systems.

Rechargeable secondary zinc-air batteries with superior cyclic stability were developed using commercial polypropylene (PP) membrane coated with polymerized ionic liquid as separators. The anionic exchange polymer was synthesized copolymerizing 1-[(4-ethenylphenyl)methyl]-3-butylimidazolium hydroxide (EBIH) and butyl methacrylate (BMA) monomers by free radical polymerization for both functionality and structural integrity. The ionic liquid induced copolymer was coated on a commercially available PP membrane (Celguard 5550). The coat allows anionic transfer through the separator and minimizes the migration of zincate ions to the cathode compartment, which reduces electrolyte conductivity and may deteriorate catalytic activity by the formation of zinc oxide on the surface of the catalyst layer. Energy dispersive X-ray spectroscopy (EDS) data revealed the copolymer-coated separator showed less zinc element in the cathode, indicating lower zinc crossover through the membrane. Ion coupled plasma optical emission spectroscopy (ICP-OES) analysis confirmed over 96% of zincate ion crossover was reduced. In our charge/discharge setup, the constructed cell with the ionic liquid induced copolymer casted separator exhibited drastically improved durability as the battery life increased more than 281% compared to the pure commercial PP membrane. Electrochemical impedance spectroscopy (EIS) during the cycle process elucidated the premature failure of cells due to the zinc crossover for the untreated cell and revealed a substantial importance must be placed in zincate control.

[1]  Zhaolin Liu,et al.  Cobalt sulfide nanoparticles impregnated nitrogen and sulfur co-doped graphene as bifunctional catalyst for rechargeable Zn–air batteries , 2015 .

[2]  Suli Wang,et al.  Highly alkaline stable N1-alkyl substituted 2-methylimidazolium functionalized alkaline anion exchange membranes , 2015 .

[3]  Joseph F. Parker,et al.  Retaining the 3D framework of zinc sponge anodes upon deep discharge in Zn-air cells. , 2014, ACS applied materials & interfaces.

[4]  Y. Kang,et al.  Synthesis, structure and gas permeation of polymerized ionic liquid graft copolymer membranes , 2013 .

[5]  Pucheng Pei,et al.  Technologies for extending zinc–air battery’s cyclelife: A review , 2014 .

[6]  Zhongwei Chen,et al.  Highly Active and Durable Nanocrystal-Decorated Bifunctional Electrocatalyst for Rechargeable Zinc-Air Batteries. , 2015, ChemSusChem.

[7]  Min Gyu Kim,et al.  Integrating NiCo Alloys with Their Oxides as Efficient Bifunctional Cathode Catalysts for Rechargeable Zinc-Air Batteries. , 2015, Angewandte Chemie.

[8]  I. Marrucho,et al.  Ionic liquid-based materials: a platform to design engineered CO2 separation membranes. , 2016, Chemical Society reviews.

[9]  K. R. Seddon,et al.  Applications of ionic liquids in the chemical industry. , 2008, Chemical Society reviews.

[10]  K. Oyaizu,et al.  Cationic polysulfonium membrane as separator in zinc–air cell , 2003 .

[11]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[12]  Bing Li,et al.  Co3O4 nanoparticles decorated carbon nanofiber mat as binder-free air-cathode for high performance rechargeable zinc-air batteries. , 2015, Nanoscale.

[13]  A. Züttel,et al.  Electrochemical characterisation of air electrodes based on La0.6Sr0.4CoO3 and carbon nanotubes , 2008 .

[14]  M. Prabu,et al.  Hierarchical nanostructured NiCo2O4 as an efficient bifunctional non-precious metal catalyst for rechargeable zinc-air batteries. , 2014, Nanoscale.

[15]  Dc Kitty Nijmeijer,et al.  Anion exchange membranes for alkaline fuel cells: A review , 2011 .

[16]  Piercarlo Mustarelli,et al.  Electrolytes for solid-state lithium rechargeable batteries: recent advances and perspectives. , 2011, Chemical Society reviews.

[17]  Hongjie Dai,et al.  Recent advances in zinc-air batteries. , 2014, Chemical Society reviews.

[18]  Jian‐mei Lu,et al.  Cross-Linked Alkaline Ionic Liquid-Based Polymer Electrolytes for Alkaline Fuel Cell Applications , 2010 .

[19]  Y. Elabd,et al.  Relative Chemical Stability of Imidazolium-Based Alkaline Anion Exchange Polymerized Ionic Liquids , 2011 .

[20]  Huamin Zhang,et al.  Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application , 2011 .

[21]  Sun Tai Kim,et al.  Metal–Air Batteries with High Energy Density: Li–Air versus Zn–Air , 2010 .

[22]  Hui Li,et al.  Highly active and durable core-corona structured bifunctional catalyst for rechargeable metal-air battery application. , 2011, Nano letters.

[23]  Sung Hoon Ahn,et al.  Highly efficient I2-free solid-state dye-sensitized solar cells fabricated with polymerized ionic liquid and graft copolymer-directed mesoporous film , 2011 .

[24]  Ja-Yeon Choi,et al.  Advanced Extremely Durable 3D Bifunctional Air Electrodes for Rechargeable Zinc‐Air Batteries , 2014 .

[25]  Seung-wook Eom,et al.  Artificially engineered, bicontinuous anion-conducting/-repelling polymeric phases as a selective ion transport channel for rechargeable zinc-air battery separator membranes , 2016 .

[26]  Elton J. Cairns,et al.  The Secondary Alkaline Zinc Electrode , 1991 .

[27]  Zhongwei Chen,et al.  3D Ordered Mesoporous Bifunctional Oxygen Catalyst for Electrically Rechargeable Zinc-Air Batteries. , 2016, Small.

[28]  C. Drummond,et al.  Protic Ionic Liquids: Evolving Structure-Property Relationships and Expanding Applications. , 2015, Chemical reviews.

[29]  J. Cook,et al.  Nonwovens as Separators for Alkaline Batteries An Overview , 2007 .

[30]  Guosong Hong,et al.  Advanced zinc-air batteries based on high-performance hybrid electrocatalysts , 2013, Nature Communications.

[31]  Patricia A. Hunt,et al.  Mixtures of ionic liquids. , 2012, Chemical Society reviews.

[32]  F. Yan,et al.  Alkaline imidazolium- and quaternary ammonium-functionalized anion exchange membranes for alkaline fuel cell applications , 2012 .

[33]  Shaohua Fang,et al.  Novel polymeric ionic liquid membranes as solid polymer electrolytes with high ionic conductivity at , 2011 .

[34]  Xizhong Wang,et al.  Dendrite growth in the recharging process of zinc–air batteries , 2015 .

[35]  Y. Shul,et al.  Proton Conducting Crosslinked Polymer Electrolyte Membranes Based on SBS Block Copolymer , 2011 .

[36]  Self-assembly preparation of mesoporous hollow nanospheric manganese dioxide and its application in zinc-air battery , 2006 .

[37]  Xizhong Wang,et al.  Morphology control of zinc regeneration for zinc–air fuel cell and battery , 2014 .

[38]  J. Shreeve,et al.  Energetic ionic liquids as explosives and propellant fuels: a new journey of ionic liquid chemistry. , 2014, Chemical reviews.

[39]  Sungmin Park,et al.  Substrate-Independent Lamellar Orientation in High-Molecular-Weight Polystyrene-b-poly(methyl methacrylate) Films: Neutral Solvent Vapor and Thermal Annealing Effect , 2014 .

[40]  Won Bo Lee,et al.  Three-dimensional multilayered nanostructures with controlled orientation of microdomains from cross-linkable block copolymers. , 2011, ACS nano.