Structural properties of alloyed Ti/Al/Ti/Au and Ti/Al/Mo/Au ohmic contacts to AlGaN/GaN

Abstract Two alloyed ohmic contact structures for AlGaN/GaN–Ti/Al/Ti/Au and Ti/Al/Mo/Au were studied. Both structures were optimized for minimum ohmic contact resistance. Structures grown on sapphire and SiC substrates were used to investigate structural properties of ohmic contacts to AlGaN/GaN. Ohmic contacts to AlGaN/GaN on SiC showed higher contact resistance values compared to contacts to AlGaN/GaN on sapphire. Ohmic contact metals were etched on samples after annealing. The alloyed interface was studied with backside illumination under an optical microscope. Alloyed inclusions associated with threading dislocations were observed on the surface. For the AlGaN/GaN on SiC sample the inclusion density was an order of magnitude lower than for the sample on sapphire. Conductive atomic force microscopy with carbon nanotube tip was used to investigate topography and conductivity profile of the surface after ohmic contact metal removal by etching.