Proton exchange membranes based on hydrophilic–hydrophobic multiblock copolymers using different hydrophobic oligomer

[1]  I. Eroglu,et al.  Effects of sulfonated polyether-etherketone (SPEEK) and composite membranes on the proton exchange membrane fuel cell (PEMFC) performance , 2009 .

[2]  M. Ueda,et al.  Synthesis and properties of sulfonated multiblock copoly(ether sulfone)s by a chain extender , 2008 .

[3]  J. Mcgrath,et al.  Hydrophilic–hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells , 2008 .

[4]  J. Kerres,et al.  Novel multiblock‐co‐ionomers as potential polymer electrolyte membrane materials , 2007 .

[5]  Yanxiang Li,et al.  Synthesis and characterization of partially fluorinated hydrophobic–hydrophilic multiblock copolymers containing sulfonate groups for proton exchange membrane , 2007 .

[6]  Bryan S. Pivovar,et al.  Proton exchange membrane for DMFC and H2/air fuel cells: Synthesis and characterization of partially fluorinated disulfonated poly(arylene ether benzonitrile) copolymers , 2007 .

[7]  J. Mcgrath,et al.  Synthesis and Characterization of Sulfonated‐ Fluorinated, Hydrophilic‐Hydrophobic Multiblock Copolymers for Proton Exchange Membranes , 2006 .

[8]  Michael A. Hickner,et al.  Influence of chemical composition and sequence length on the transport properties of proton exchange membranes , 2006 .

[9]  B. Pivovar,et al.  The Chemical and Structural Nature of Proton Exchange Membrane Fuel Cell Properties , 2005 .

[10]  Wolfgang Lenk,et al.  Membranes from sulfonated block copolymers for use in fuel cells , 2005 .

[11]  B. Pivovar,et al.  Sulfonated poly(arylene ether sulfone) copolymer proton exchange membranes: composition and morphology effects on the methanol permeability , 2004 .

[12]  M. Hickner,et al.  Alternative polymer systems for proton exchange membranes (PEMs). , 2004, Chemical reviews.

[13]  Robert B. Moore,et al.  State of understanding of nafion. , 2004, Chemical reviews.

[14]  S. Holdcroft,et al.  Synthesis of Sulfonated Polysulfone-block-PVDF Copolymers: Enhancement of Proton Conductivity in Low Ion Exchange Capacity Membranes , 2004 .

[15]  Young Taik Hong,et al.  Effect of acidification treatment and morphological stability of sulfonated poly(arylene ether sulfone) copolymer proton‐exchange membranes for fuel‐cell use above 100 °C , 2003 .

[16]  J. Mcgrath,et al.  Influence of the bisphenol structure on the direct synthesis of sulfonated poly(arylene ether) copolymers. I , 2003 .

[17]  A. Ghenciu,et al.  Review of fuel processing catalysts for hydrogen production in PEM fuel cell systems , 2002 .

[18]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[19]  Michael D. Guiver,et al.  Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications , 2000 .

[20]  L. Leibler.  Theory of Microphase Separation in Block Copolymers , 1980 .

[21]  M. Xiao,et al.  Poly (fluorenyl ether ketone) ionomers containing separated hydrophilic multiblocks used in fuel cells as proton exchange membranes , 2010 .

[22]  O. Diat,et al.  Sulfonated polyimide membranes : a new type of ion-conducting membrane for electrochemical applications , 2000 .

[23]  T. L. Clair.  Structure-property relationships in linear aromatic polyimides , 1990 .