Model-based prediction of the ohmic resistance of metallic interconnects from oxide scale growth based on scanning electron microscopy

[1]  A. Mai,et al.  Cr2O3 scale growth rates on metallic interconnectors derived from 40,000 h solid oxide fuel cell stack operation , 2013 .

[2]  P. Gasser,et al.  Redox cycling of Ni-YSZ anodes for solid oxide fuel cells: influence of tortuosity, constriction and percolation factors on the effective transport properties , 2013 .

[3]  L. Gautier,et al.  Electric Current Effects on the Corrosion Behaviour of High Chromium Ferritic Steels , 2013, Oxidation of Metals.

[4]  Paul Gannon,et al.  High-Temperature, Dual-Atmosphere Corrosion of Solid-Oxide Fuel Cell Interconnects , 2012 .

[5]  S. Fontana,et al.  Metallic Interconnects for Solid Oxide Fuel Cell: Performance of Reactive Element Oxide Coating During 10, 20 and 30 Months Exposure , 2012, Oxidation of Metals.

[6]  F. Doğan,et al.  Redox Stability of Ni-YSZ Cermets Prepared by Polymeric Precursor Infiltration , 2012 .

[7]  P. Hendriksen,et al.  Interaction mechanisms between slurry coatings and solid oxide fuel cell interconnect alloys during high temperature oxidation , 2012 .

[8]  Boris Iwanschitz,et al.  Nickel agglomeration in solid oxide fuel cells: The influence of temperature , 2012 .

[9]  Lei Chen,et al.  Strontium transport and conductivity of Mn1.5Co1.5O4 coated Haynes 230 and Crofer 22 APU under simulated solid oxide fuel cell condition , 2011 .

[10]  H. Ebrahimifar,et al.  Oxidation and electrical behavior of AISI 430 coated with cobalt spinels for SOFC interconnect applications , 2011 .

[11]  A. Michaelis,et al.  Area specific resistance of oxide scales grown on ferritic alloys for solid oxide fuel cell intercon , 2011 .

[12]  T. Hocker,et al.  Automated, Model‐Based Analysis of Uj‐Data for Electrolyte‐Supported SOFC Short‐Stacks , 2011 .

[13]  J. Wallace,et al.  Evaluation of SOFC Interconnects Made of Ferritic Steels with Nano-Structured Oxi-Ceramic Protective Coatings Deposited by the LAFAD Process , 2011 .

[14]  Q. Ma,et al.  Anode-supported planar SOFC with high performance and redox stability , 2010 .

[15]  Xingbo Liu,et al.  Recent Development of SOFC Metallic Interconnect , 2010 .

[16]  Zhenguo Yang,et al.  Recent advances in metallic interconnects for solid oxide fuel cells , 2008 .

[17]  L. Singheiser,et al.  Correlation between the Microstructure, Growth Mechanism, and Growth Kinetics of Alumina Scales on a FeCrAlY Alloy , 2007 .

[18]  M. Viviani,et al.  Metallic interconnects for SOFC: Characterisation of corrosion resistance and conductivity evaluation at operating temperature of differently coated alloys , 2007 .

[19]  D. Mumm,et al.  Stability Analysis of the Interface Between Electrical Contact Layers and Metal Interconnects in Solid Oxide Fuel Cells , 2007 .

[20]  L. Singheiser,et al.  Reduction of chromium vaporization from SOFC interconnectors by highly effective coatings , 2007 .

[21]  Z. Yang,et al.  Conductive protection layers on oxidation resistant alloys for SOFC interconnect applications , 2006 .

[22]  T. Narushima,et al.  Oxidation or Nitridation Behavior of Pure Chromium and Chromium Alloys Containing 10 mass%Ni or Fe in Atmospheric Heating , 2006 .

[23]  Daniel Favrat,et al.  Simulation of SOFC stack and repeat elements including interconnect degradation and anode reoxidation risk , 2006 .

[24]  Z. Yang,et al.  Deposition and Evaluation of Protective PVD Coatings on Ferritic Stainless Steel SOFC Interconnects , 2006 .

[25]  L. Singheiser,et al.  Growth Mechanisms and Electrical Conductivity of Oxide Scales on Ferritic Steels Proposed as Interconnect Materials for SOFC's , 2006 .

[26]  J. Fergus.  Metallic interconnects for solid oxide fuel cells , 2005 .

[27]  L. C. Jonghe,et al.  Protective coating on stainless steel interconnect for SOFCs: oxidation kinetics and electrical properties , 2005 .

[28]  Z. Yang,et al.  Structure and Conductivity of Thermally Grown Scales on Ferritic Fe-Cr-Mn Steel for SOFC Interconnect Applications , 2004 .

[29]  D. Gelles,et al.  High-temperature oxidation resistance and surface electrical conductivity of stainless steels with filtered arc Cr–Al–N multilayer and/or superlattice coatings , 2004 .

[30]  K. Kawamura,et al.  Oxidation behavior of Fe–16Cr alloy interconnect for SOFC under hydrogen potential gradient , 2004 .

[31]  E. Ivers-Tiffée,et al.  Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications , 2004 .

[32]  L. Singheiser,et al.  Growth Rates of Alumina Scales on Fe–Cr–Al Alloys , 2004 .

[33]  Z. Yang,et al.  Anomalous Corrosion Behavior of Stainless Steels under SOFC Interconnect Exposure Conditions , 2003 .

[34]  Y. Larring,et al.  HT Corrosion of a Cr-5 wt % Fe-1 wt % Y 2 O 3 Alloy and Conductivity of the Oxide Scale Effects of Water Vapor , 2003 .

[35]  Vladimir Shemet,et al.  Metallic interconnectors for solid oxide fuel cells – a review , 2003 .

[36]  Y. Larring,et al.  Spinel and Perovskite Functional Layers Between Plansee Metallic Interconnect (Cr‐5 wt % Fe‐1 wt % Y 2 O 3) and Ceramic ( La0.85Sr0.15 ) 0.91MnO3 Cathode Materials for Solid Oxide Fuel Cells , 2000 .

[37]  A. Galerie,et al.  Characterization of Chromia Scales Grown on Pure Chromium in Different Oxidizing Atmospheres , 2000 .

[38]  D. England,et al.  Oxidation Kinetics of Some Nickel‐Based Superalloy Foils and Electronic Resistance of the Oxide Scale Formed in Air Part I , 1999 .

[39]  W. Quadakkers,et al.  The effect of water vapor on the oxidation behavior of 9%Cr steels in simulated combustion gases , 1998 .

[40]  A. Khanna,et al.  Compatibility of perovskite contact layers between cathode and metallic interconnector plates of SOFCs , 1996 .

[41]  W. Quadakkers.  Growth mechanisms of oxide scales on ODS alloys in the temperature range 1000–1100°C , 1990 .

[42]  J. Park,et al.  Electronic transport in thermally grown Cr2O3 , 1990 .

[43]  Per Kofstad,et al.  High Temperature Corrosion , 1988 .

[44]  T. Matsui,et al.  Electrical conductivity anomaly of nonstoichiometric chromium sesquioxide , 1984 .

[45]  R. I. Taylor,et al.  A quantitative demonstration of the grain boundary diffusion mechanism for the oxidation of metals , 1982 .

[46]  G. Samsonov,et al.  The Oxide Handbook , 1973 .

[47]  M. Ueda,et al.  Effect of Electric Current on Growth of Oxide Scale on Fe–25Cr Alloy for SOFC Interconnect at 1073 K , 2012 .

[48]  Frank Tietz,et al.  Thermal expansion of SOFC materials , 1999 .

[49]  S. Ishikawa,et al.  Electrical Conductivity of Sintered Cr 2 O 3 with Fe 2 O 3 , 1985 .

[50]  H. Nagai,et al.  Electrical Conductivity of Cr 2 O 3 Doped with La 2 O 3 , Y 2 O 3 and NiO , 1983 .

[51]  F. C. Nix,et al.  The Thermal Expansion of Pure Metals. II: Molybdenum, Palladium, Silver, Tantalum, Tungsten, Platinum, and Lead , 1942 .