Thermal stabilization of nanocrystalline promoting conductive corrosion resistance of TiN–Ag films for metal bipolar plates

[1]  M. Li,et al.  Activation energy and its fluctuations at grain boundaries of Er3+:BaTiO3 perovskite thin films: Effect of doping concentration and annealing temperature , 2021 .

[2]  M. Brizuela,et al.  TiN-Ag as an antimicrobial and wear resistant coating , 2021 .

[3]  K. Satoh,et al.  Electrical and piezoresistive properties of titanium oxycarbide thin films for high-temperature pressure sensors , 2021 .

[4]  L. Hultman,et al.  The same chemical state of carbon gives rise to two peaks in X-ray photoelectron spectroscopy , 2021, Scientific Reports.

[5]  Wei Li,et al.  Evaluation of vacuum heat-treated α-C films for surface protection of metal bipolar plates used in polymer electrolyte membrane fuel cells , 2021 .

[6]  A. Cavaleiro,et al.  High Si multilayered TiSiN/TiN(Ag) films with superior oxidation resistance , 2021 .

[7]  J. Denlinger,et al.  Effect of the sample work function on alkali metal dosing induced electronic structure change , 2021, Journal of Electron Spectroscopy and Related Phenomena.

[8]  Jingran Shi,et al.  Majorization of GLC properties by the introduction of silver nanowires as conductive framework for metal bipolar plates , 2020 .

[9]  Yuan Zhao,et al.  Photocatalytic performance of TiO2 nanotube structure based on TiN coating doped with Ag and Cu , 2020 .

[10]  Jingran Shi,et al.  Sputtered chromium nitride films with finely tuned intra- and intercolumnar porosities as pseudocapacitive electrode for supercapacitors , 2020 .

[11]  Jingli Luo,et al.  Enhancing through-plane electrical conductivity by introducing Au microdots onto TiN coated metal bipolar plates of PEMFCs , 2020 .

[12]  Se‐Hun Kwon,et al.  Ultrathin effective TiN protective films prepared by plasma-enhanced atomic layer deposition for high performance metallic bipolar plates of polymer electrolyte membrane fuel cells , 2020 .

[13]  A. Abrão,et al.  Analysis of the surface energy interactions in the tribological behavior of ALCrN and TIAlN coatings , 2020 .

[14]  P. He,et al.  The mixture of silver nanowires and nanosilver-coated copper micronflakes for electrically conductive adhesives to achieve high electrical conductivity with low percolation threshold , 2020 .

[15]  Zhen He,et al.  Formation of a protective TiN layer by liquid phase plasma electrolytic nitridation on Ti–6Al–4V bipolar plates for PEMFC , 2020 .

[16]  R. Taherian,et al.  Investigation on physical and electrochemical properties of TiN-coated Monel alloy used for bipolar plates of proton exchange membrane fuel cell , 2019 .

[17]  M. Golozar,et al.  Preparation and performance of nanometric Ti/TiN multi-layer physical vapor deposited coating on 316L stainless steel as bipolar plate for proton exchange membrane fuel cells , 2019, Journal of Power Sources.

[18]  Shaoyun Guo,et al.  Achieving high electrical conductivity and excellent electromagnetic interference shielding in poly(lactic acid)/silver nanocomposites by constructing large-area silver nanoplates in polymer matrix , 2019, Composites Part B: Engineering.

[19]  A. Behera,et al.  Evaluation of Ni-Cr-P coatings electrodeposited on low carbon steel bipolar plates for polymer electrolyte membrane fuel cell , 2018, International Journal of Hydrogen Energy.

[20]  T. Lei,et al.  Development of Ti bipolar plates with carbon/PTFE/TiN composites coating for PEMFCs , 2018, International Journal of Hydrogen Energy.

[21]  Xinyu Zhang,et al.  Effect of cluster interface structure on the spontaneous escape behavior of silver in ion plating coatings and its inhibition mechanism , 2018, Thin Solid Films.

[22]  L. Hultman,et al.  Reliable determination of chemical state in x-ray photoelectron spectroscopy based on sample-work-function referencing to adventitious carbon: Resolving the myth of apparent constant binding energy of the C 1s peak , 2018, Applied Surface Science.

[23]  O. Kongstein,et al.  Soldering a gas diffusion layer to a stainless steel bipolar plate using metallic tin , 2018 .

[24]  N. Rajendran,et al.  Corrosion and interfacial contact resistance behavior of electrochemically nitrided 316L SS bipolar plates for proton exchange membrane fuel cells , 2017 .

[25]  H. Ju,et al.  Microstructure, mechanical and tribological properties of TiN-Ag films deposited by reactive magnetron sputtering , 2017 .

[26]  M. Shamanian,et al.  The study of Ni-based nano-crystalline and amorphous alloy coatings on AISI 304 stainless steel for PEM fuel cell bipolar plate application , 2017 .

[27]  L. Hultman,et al.  C 1s Peak of Adventitious Carbon Aligns to the Vacuum Level: Dire Consequences for Material's Bonding Assignment by Photoelectron Spectroscopy , 2017, Chemphyschem : a European journal of chemical physics and physical chemistry.

[28]  Z. Dong,et al.  Chromium interlayer amorphous carbon film for 304 stainless steel bipolar plate of proton exchange membrane fuel cell , 2016 .

[29]  M. Habibi,et al.  Enhanced electrical conductivity of two layers AlN–TiN coating on SS316L as bipolar plate using plasma focus device , 2016 .

[30]  Linfa Peng,et al.  Influence of Cr-C film composition on electrical and corrosion properties of 316L stainless steel as bipolar plates for PEMFCs , 2016 .

[31]  Z. Dong,et al.  Electric Conductivity and Corrosion Resistance of Amorphous Carbon Films Prepared by Direct Current Magnetron Sputtering on 304 Stainless Steel , 2015 .

[32]  H. Ju,et al.  Microstructure and tribological properties of NbN-Ag composite films by reactive magnetron sputtering , 2015 .

[33]  G. Hinds,et al.  Towards more representative test methods for corrosion resistance of PEMFC metallic bipolar plates , 2015 .

[34]  M. Ürgen,et al.  XPS investigations of tribolayers formed on TiN and (Ti,Re)N coatings , 2015 .

[35]  C. Kang,et al.  Fabrication of titanium bipolar plates by rubber forming and performance of single cell using TiN-coated titanium bipolar plates , 2014 .

[36]  M. Toyoda,et al.  Anticorrosion properties of tin oxide coatings for carbonaceous bipolar plates of proton exchange membrane fuel cells , 2014 .

[37]  Xinmin Lai,et al.  Development and characterization of multilayered Cr–C/a-C:Cr film on 316L stainless steel as bipolar plates for proton exchange membrane fuel cells , 2013 .

[38]  Benjamin D. Gould,et al.  Decreasing contact resistance in proton-exchange membrane fuel cells with metal bipolar plates , 2013 .

[39]  Z. Ren,et al.  Stacks with TiN/titanium as the bipolar plate for PEMFCs , 2012 .

[40]  Yi Yu,et al.  A review on performance degradation of proton exchange membrane fuel cells during startup and shutdown processes: Causes, consequences, and mitigation strategies , 2012 .

[41]  Bruno G. Pollet,et al.  Polymer Electrolyte Membrane Fuel Cell (PEMFC) Flow Field Plate: Design, Materials and Characterisation , 2010 .

[42]  Y. Yun.  Deposition of gold–titanium and gold–nickel coatings on electropolished 316L stainless steel bipolar plates for proton exchange membrane fuel cells , 2010 .

[43]  E. Gyenge,et al.  Characterizing the Structural Degradation in a PEMFC Cathode Catalyst Layer: Carbon Corrosion , 2009 .

[44]  D. Northwood,et al.  Effect of substrate material on the corrosion of TiN-coated stainless steels in simulated anode and cathode environments of proton exchange membrane fuel cells , 2009 .

[45]  P. Midgley,et al.  Fabrication and characterization of TiN-Ag nano-dice. , 2009, Micron.

[46]  F. Zaza,et al.  Bipolar plate materials for PEMFCs: A conductivity and stability study , 2008 .

[47]  Yoshiaki Matsuo,et al.  Carbon-coated stainless steel as PEFC bipolar plate material , 2007 .

[48]  H. Hirashima,et al.  Synthesis of flexible silica aerogels using methyltrimethoxysilane (MTMS) precursor. , 2006, Journal of colloid and interface science.

[49]  Suzhen Luo,et al.  Corrosion behavior of TiN coated type 316 stainless steel in simulated PEMFC environments , 2004 .

[50]  L. Hultman,et al.  X-ray photoelectron spectroscopy: Towards reliable binding energy referencing , 2020, Progress in Materials Science.