Low Voltage Ride through of Wind Turbine Based on New SGSC Converter Structure

The proportion of wind power in power systems is increasing year by year. Large-scale wind turbine off the grid when grid system failures. So the wind turbine needs to low voltage ride through (LVRT) function of wind turbine. Aiming at this problem, which in this article by DIgSILENT simulation software build 1.5MW doubly-fed wind turbine(DFIG) model, using active Crowbar and series grid side converter (SGSC) control strategy to realize the simulation of low voltage ride through of wind turbine. The control strategy of active Crowbar is mainly through the short circuit of rotor side converter to realize LVRT, and needs to be matched with the active and reactive power control strategy. SGSC is a novel converter structure, which mainly through compensating stator flux drop to realize LVRT. Finally this two kinds of control strategies were compared, demonstrated SGSC control strategy can achieve the low voltage ride through capabilities of the doubly-fed wind turbine.

[1]  M. A. Poller Doubly-fed induction machine models for stability assessment of wind farms , 2003, 2003 IEEE Bologna Power Tech Conference Proceedings,.

[2]  Yongdong Li,et al.  Improved Crowbar Control Strategy of DFIG Based Wind Turbines for Grid Fault Ride-Through , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[3]  V. Akhmatov Analysis of Dynamic Behaviour of Electric Power Systems with Large Amount of Wind Power , 2003 .