Combined influence of rectangular wire coil and twisted tape on flow and heat transfer characteristics in square mini-channels

[1]  A. Alavi,et al.  Impact of new multiple twisted tapes on treatment of solar heat exchanger , 2022, The European Physical Journal Plus.

[2]  Zhenjun Hu,et al.  Numerical investigation on thermal-hydraulic characteristics in a mini-channel with trapezoidal cross-section longitudinal vortex generators , 2021, Applied Thermal Engineering.

[3]  J. Qin,et al.  A lightweight and low-cost liquid-cooled thermal management solution for high energy density prismatic lithium-ion battery packs , 2021, Applied Thermal Engineering.

[4]  Wei Zhou,et al.  Smart microchannel heat exchanger based on the adaptive deformation effect of shape memory alloys , 2021, Energy Conversion and Management.

[5]  Hongqing Wang,et al.  Study of the performance of an integrated liquid cooling heat sink for high-power IGBTs , 2021 .

[6]  Jinxin Zhang,et al.  Effects of truncated and offset pin-fins on hydrothermal performance and entropy generation in a rectangular microchannel heat sink with variable fluid properties , 2021 .

[7]  V. Ozceyhan,et al.  Thermohydraulic performance evaluation for horizontal tube by using combination of modified coiled wire inserts and graphene nanoplatelet-water nanouids , 2021 .

[8]  Daxiang Deng,et al.  Thermal and flow performance in microchannel heat sink with open-ring pin fins , 2021 .

[9]  Z. Said,et al.  Analyzing entropy and thermal behavior of nanomaterial through solar collector involving new tapes , 2021 .

[10]  Liangbi Wang,et al.  Convective heat transfer enhancement mechanisms in circular tube inserted with a type of twined coil , 2021 .

[11]  A. Rona,et al.  Thermo-hydraulic performance of a circular microchannel heat sink using swirl flow and nanofluid , 2021, Applied Thermal Engineering.

[12]  K. Ramji,et al.  Investigation on thermal performance of different wire coil twisted tape inserts in a tube circulated with water , 2021 .

[13]  D. Toghraie,et al.  Analysis of entropy generation of ferrofluid flow in the microchannel with twisted porous ribs: The two-phase investigation with various porous layers , 2020 .

[14]  Z. Soleymani,et al.  Performance analysis of hotspot using geometrical and operational parameters of a microchannel pin-fin hybrid heat sink , 2020 .

[15]  Zuqiang Huang,et al.  Experimental investigation of laminar flow and heat transfer characteristics in square minichannels with twisted tapes , 2020 .

[16]  Chenying Zhang,et al.  Experimental and numerical studies on heat transfer enhancement of microchannel heat exchanger embedded with different shape micropillars , 2020 .

[17]  J. A. Almendros-Ibáñez,et al.  Experimental characterization of a double tube heat exchanger with inserted twisted tape elements , 2020 .

[18]  M. Jafaryar,et al.  CuO nanomaterial two-phase simulation within a tube with enhanced turbulator , 2020 .

[19]  İ. Yılmaz,et al.  Enhancing the overall thermal performance of a large aperture parabolic trough solar collector using wire coil inserts , 2020 .

[20]  Mohsen H. Fagr,et al.  Experimental and numerical investigation of swirling turbulent flow and heat transfer due to insertion of twisted tapes of new models in a heated tube , 2020, Applied Thermal Engineering.

[21]  Benitta A. Chaedir,et al.  Laminar convective heat transfer in helical tube with twisted tape insert , 2020 .

[22]  G. Ding,et al.  Fluid and heat transfer characteristics of microchannel heat sink with truncated rib on sidewall , 2020 .

[23]  Wenhui Zhu,et al.  Field synergy analysis on flow and heat transfer characteristics of nanofluid in microchannel with non-uniform cavities configuration , 2019 .

[24]  Lei He,et al.  Numerical studies on the hydraulic and thermal performances of microchannels with different cross-sectional shapes , 2019, International Journal of Heat and Mass Transfer.

[25]  E. Hosseini,et al.  Study of intensification of the heat transfer in helically coiled tube heat exchangers via coiled wire inserts , 2019, International Journal of Thermal Sciences.

[26]  A. Saravanan,et al.  Heat transfer augmentation techniques in forced flow V-trough solar collector equipped with V-cut and square cut twisted tape , 2019, International Journal of Thermal Sciences.

[27]  M. Pan,et al.  Experimental investigation of the heat transfer performance of microchannel heat exchangers with fan-shaped cavities , 2019, International Journal of Heat and Mass Transfer.

[28]  S. M. Abolarin,et al.  Heat transfer and pressure drop characteristics of alternating clockwise and counter clockwise twisted tape inserts in the transitional flow regime , 2019, International Journal of Heat and Mass Transfer.

[29]  Fang Wang,et al.  Effects of structural parameters on fluid flow and heat transfer in a serpentine microchannel with fan-shaped reentrant cavities , 2019, Applied Thermal Engineering.

[30]  Boming Yu,et al.  A novel fractal model for permeability of damaged tree-like branching networks , 2018, International Journal of Heat and Mass Transfer.

[31]  Xin-gang Liang,et al.  Flow boiling of R134a in an open-cell metal foam mini-channel evaporator , 2018, International Journal of Heat and Mass Transfer.

[32]  Li Haiyan,et al.  Numerical investigation on laminar flow and heat transfer in rectangular microchannel heat sink with wire coil inserts , 2017 .

[33]  Guodong Xia,et al.  Experimental and numerical study of fluid flow and heat transfer characteristics in microchannel heat sink with complex structure , 2015 .

[34]  Davood Domiri Ganji,et al.  Review of heat transfer enhancement methods: Focus on passive methods using swirl flow devices , 2015 .

[35]  Li Jian,et al.  Optimum thermal design of interrupted microchannel heat sink with rectangular ribs in the transverse microchambers , 2013 .

[36]  Pongjet Promvonge,et al.  Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics ☆ , 2010 .

[37]  J. P. Solano,et al.  Enhancement of laminar and transitional flow heat transfer in tubes by means of wire coil inserts , 2007 .

[38]  F. Durst,et al.  Performance comparison of pin fin in-duct flow arrays with various pin cross-sections , 2006 .

[39]  V. Ozceyhan,et al.  Heat transfer augmentation in a tube with conical wire coils using a mixture of ethylene glycol/water as a fluid , 2022 .

[40]  Jinxin Zhang,et al.  Effects of regular triangular prisms on thermal and hydraulic characteristics in a minichannel heat sink , 2022, International Journal of Heat and Mass Transfer.

[41]  Robert J. Moffat,et al.  Describing the Uncertainties in Experimental Results , 1988 .