论文信息 - A tension split Hopkinson bar for investigating the dynamic behavior of sheet metals

A tension split Hopkinson bar for investigating the dynamic behavior of sheet metals

The dynamic response of sheet metals at high strain rate is investigated with a tensile split Hopkinson bar test using plate type specimens. The tension split Hopkinson bar inevitably causes some errors in the strain at grips with the plate type specimens, since the grip and specimens disturb the one-dimensional wave propagation in bars. To validate the experiment, the level of error induced from the grips is estimated by comparing the waves acquired from experiments with the Pochhammer-Chree solution. The optimum geometry of the specimen is determined to minimize the loading equilibrium error. High strain rate tensile tests are then performed with auto-body sheet metals in order to construct their appropriate constitutive models for use in crash-worthiness evaluation.

[1] W. J. Kang,et al. Modified Johnson-Cook model for vehicle body crashworthiness simulation , 1999 .

[2] Kinya Ogawa,et al. Impact-tension compression test by using a split-Hopkinson bar , 1984 .

[3] Amos Gilat,et al. A direct-tension split Hopkinson bar for high strain-rate testing , 1991 .

[4] T. Nicholas. Tensile testing of materials at high rates of strain , 1981 .

[5] R. Armstrong,et al. Dislocation-mechanics-based constitutive relations for material dynamics calculations , 1987 .

[6] Hoon Huh,et al. High strain rate tensile test of sheet metals with a new tension split hopkinson bar , 1997 .

[7] J. N. Johnson,et al. Theoretical study of the dynamic tensile test , 1986 .

[8] Herbert Kolsky,et al. Stress Waves in Solids , 2003 .

[9] D. Steinberg,et al. A constitutive model for metals applicable at high-strain rate , 1980 .

[10] L. M. Yeakley,et al. High strain-rate testing: Tension and compression , 1968 .

[11] P. S. Follansbee,et al. Wave Propagation in the Split Hopkinson Pressure Bar , 1983 .

[12] M. Li,et al. A Kolsky bar: Tension, tension-tension , 1993 .

[13] H. Huh,et al. Identification of Dynamic Behavior of Sheet Metals for an Auto-Body with Tension Split Hopkinson Bar , 1998 .

[14] D. J. Parry,et al. The Hopkinson Bar , 1999 .

[15] Gérard Gary,et al. The testing and behaviour modelling of sheet metals at strain rates from 10−4 to 104 s−1 , 1996 .