Short Review: Role of Metal Oxides as Filler in Polysiloxane Sheet Composite

Additional of fillers such as silica (SiO2), alumina (Al2O3), zinc oxide (ZnO), Zirconium carbide ( ZrC) and Zirconia (ZrO2) would affect the properties of the polysiloxane sheet, that can be applied in various applications. Polysiloxane sheet composites are largely use today with various materials as fillers. The fabrication techniques of the polysiloxane composite sheets include micro-moulding, casting moulding and injection moulding. Application of different fabricating process, physical and mechanical properties of polysiloxane sheet composites. Thus, this paper complies various studies with regards to the various properties of polysiloxane sheet composites established by incorporation of different fabrication technique and fillers.

[1]  M. Sebastian,et al.  Effect of micro- and nano-fillers on the properties of silicone rubber-alumina flexible microwave substrate , 2013 .

[2]  Ranveer Kumar,et al.  Effect Of Al2O3 ceramic Filler On PEG-based Composite Polymer electrolytes For Magnesium Batteries , 2013 .

[3]  K. Papadokostaki,et al.  Effect of hydrophilic inclusions on PDMS crosslinking reaction and its interrelation with mechanical and water sorption properties of cured films , 2013 .

[4]  Dong Yang,et al.  Ceramization and oxidation behaviors of silicone rubber ablative composite under oxyacetylene flame , 2013 .

[5]  S. Mousavinasab.  Effects of Filler Content on Mechanical and Optical Properties of Dental Composite Resin , 2011 .

[6]  Mark G. Allen,et al.  Micropatternable elastic electrets based on a PDMS/carbon nanotube composite , 2010 .

[7]  J. E. Mark,et al.  Fillers for polysiloxane (“silicone”) elastomers , 2010 .

[8]  Wei Wang,et al.  PDMS gold nanoparticle composite film-based silver enhanced colorimetric detection of cardiac troponin I , 2010 .

[9]  S. Pratsinis,et al.  Structure & strength of silica-PDMS nanocomposites , 2010 .

[10]  Wenbin Cao,et al.  Polydimethylsiloxane microfluidic chip with integrated microheater and thermal sensor. , 2009, Biomicrofluidics.

[11]  P. Sheng,et al.  Characterizing and Patterning of PDMS‐Based Conducting Composites , 2007 .

[12]  D. Avnir,et al.  Composite Particles of Silica/Poly(dimethylsiloxane) , 2005 .

[13]  Kankanhalli N. Seetharamu,et al.  Thermal characterization of Al2O3 and ZnO reinforced silicone rubber as thermal pads for heat dissipation purposes , 2005 .

[14]  G. Vigier,et al.  Influence of SiO2 fillers on the irradiation ageing of silicone rubbers , 2001 .

[15]  D. Beebe,et al.  Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer , 2000, Journal of Microelectromechanical Systems.

[16]  Dong Yang,et al.  Silicone rubber ablative composites improved with zirconium carbide or zirconia , 2013 .

[17]  S. Pratsinis,et al.  Structure and Strength of Silica-PDMS Nanocomposites , 2011 .

[18]  Q. Lin,et al.  Microfabricated PDMS Check Valves , 2003 .