Performance analysis of ambient backscattering for green Internet of Things

In this paper, we assess the information-theoretic performance of a point-to-point link that exploits ambient backscattering to support green Internet-of-Thing (IoT) communications. In this framework, an IoT passive device transmits its information by reusing ambient radio-frequency signals emitted by an existing or legacy multicarrier communication system. After introducing the signal model of the relevant communication links, the information-theoretic capacity of both the legacy and backscatter systems is derived. It is found that, under reasonable operative conditions, the legacy system can turn the RF interference arising from backscattering into a form of multipath diversity, which can be exploited to increase its own performance. Moreover, it is shown that, even when it employs simple single-carrier modulation techniques, the backscatter system attains significant data rates over relatively short distances.

[1]  Joshua R. Smith,et al.  Wi-fi backscatter , 2014, SIGCOMM 2015.

[2]  Charles R. Johnson,et al.  Matrix analysis , 1985, Statistical Inference for Engineers and Data Scientists.

[3]  Donatella Darsena,et al.  A Constrained Maximum-SINR NBI-Resistant Receiver for OFDM Systems , 2007, IEEE Transactions on Signal Processing.

[4]  Chintha Tellambura,et al.  Uplink Detection and BER Analysis for Ambient Backscatter Communication Systems , 2014, 2015 IEEE Global Communications Conference (GLOBECOM).

[5]  Feifei Gao,et al.  Signal detection for ambient backscatter system with multiple receiving antennas , 2015, 2015 IEEE 14th Canadian Workshop on Information Theory (CWIT).

[6]  Colby Boyer,et al.  — Invited Paper — Backscatter Communication and RFID: Coding, Energy, and MIMO Analysis , 2014, IEEE Transactions on Communications.

[7]  Shahriar Mirabbasi,et al.  Wireless Energy Harvesting for Internet of Things , 2014 .

[8]  Anna Scaglione,et al.  Randomized space-time block coding for distributed amplify-and-forward cooperative relays , 2010, 2010 IEEE International Conference on Acoustics, Speech and Signal Processing.

[9]  Zhangdui Zhong,et al.  Signal detection and BER analysis for RF-powered devices utilizing ambient backscatter , 2015, 2015 International Conference on Wireless Communications & Signal Processing (WCSP).

[10]  A. Goldsmith Communication by Means of Reflected Power , 2022 .

[11]  Stephen G. Wilson,et al.  Digital Modulation and Coding , 1995 .

[12]  Donatella Darsena,et al.  Exploiting noncircularity in backscattering communications , 2015, 2015 International Symposium on Wireless Communication Systems (ISWCS).

[13]  Song Guo,et al.  Green Communications and Computing Networks , 2016, IEEE Commun. Mag..

[14]  Sachin Katti,et al.  BackFi: High Throughput WiFi Backscatter , 2015, SIGCOMM.

[15]  Umberto Mengali,et al.  A comparison of pilot-aided channel estimation methods for OFDM systems , 2001, IEEE Trans. Signal Process..

[16]  Donatella Darsena,et al.  NBI-resistant zero-forcing equalizers for OFDM systems , 2005, IEEE Communications Letters.

[17]  J. Teizer,et al.  Quadrature Amplitude Modulated Backscatter in Passive and Semipassive UHF RFID Systems , 2012, IEEE Transactions on Microwave Theory and Techniques.

[18]  David Wetherall,et al.  Ambient backscatter: wireless communication out of thin air , 2013, SIGCOMM.

[19]  Donatella Darsena,et al.  Achievable information rates of ambient backscatter communications , 2016, ArXiv.

[20]  Risto Wichman,et al.  In-Band Full-Duplex Wireless: Challenges and Opportunities , 2013, IEEE Journal on Selected Areas in Communications.