RF MEMS switches fabricated on microwave-laminate printed circuit boards

A novel fabrication process has been developed for directly constructing radio frequency microelectrical mechanical systems (RF MEMS) capacitive switches on microwave-laminate printed circuit boards (PCBs). The integrated process uses metal wet etching to form the metal lines for coplanar waveguides, compressive molding planarization (COMP) to planarize uneven surface heights for switch membrane formation, and high-density, inductively coupled plasma chemical vapor deposition (HDICP-CVD) for low-temperature silicon nitride deposition. This technology promises the potential of further monolithic integration with antennas on the same PCBs to form reconfigurable antennas without the concerns of mismatching among components.

[1]  M. F. Chang,et al.  A Surface Micromachined Miniature Switch For Telecommunications Applications With Signal Frequencies From DC Up To 4 Ghz , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[2]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 2. Design , 2000 .

[3]  Yu Liu,et al.  Low-loss distributed MEMS phase shifter , 2000 .

[5]  J. Bu,et al.  Monolithically integrated micromachined RF MEMS capacitive switches , 2001 .

[6]  Gabriel M. Rebeiz,et al.  30 GHz tuned MEMS switches , 1999, 1999 IEEE MTT-S International Microwave Symposium Digest (Cat. No.99CH36282).

[7]  W. Messner,et al.  Effects of elevated temperature treatments in microstructure release procedures , 1995 .

[8]  S. Eshelman,et al.  Performance of low-loss RF MEMS capacitive switches , 1998 .

[9]  Gabriel M. Rebeiz,et al.  High-isolation CPW MEMS shunt switches. 1. Modeling , 2000 .

[10]  A. Malczewski,et al.  RF MEMs variable capacitors for tunable filters , 1999 .

[11]  J.B. Hacker,et al.  A monolithic MEMS switched dual-path power amplifier , 2001, IEEE Microwave and Wireless Components Letters.

[12]  R. Howe,et al.  Batch transfer of microstructures using flip-chip solder bonding , 1999 .

[13]  Victor M. Bright,et al.  The realization and design considerations of a flip-chip integrated MEMS tunable capacitor , 2000 .

[14]  S. Eshelman,et al.  Micromachined low-loss microwave switches , 1999 .

[15]  Guann-Pyng Li,et al.  Novel technique for fabrication of multi-layered microcoils in microelectromechanical systems (MEMS) applications , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[16]  Adele E. Schmitz,et al.  GaAs-compatible surface-micromachined RF MEMS switches , 1999 .

[17]  Gabriel M. Rebeiz,et al.  Distributed MEMS true-time delay phase shifters and wide-band switches , 1998 .

[18]  Songcheol Hong,et al.  A low voltage actuated micromachined microwave switch using torsion springs and leverage , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[19]  Adele E. Schmitz,et al.  Surface-micromachined RF MEMs switches on GaAs substrates , 1999 .

[20]  G.P. Li,et al.  A parametric model of MEMS capacitive switch operating at microwave frequencies , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[21]  C. Nguyen,et al.  Design of low actuation voltage RF MEMS switch , 2000, 2000 IEEE MTT-S International Microwave Symposium Digest (Cat. No.00CH37017).

[22]  Guann-Pyng Li,et al.  Monolithic integration of RF MEMS switches with a diversity antenna on PCB substrate , 2003 .

[23]  Elliott R. Brown,et al.  RF-MEMS switches for reconfigurable integrated circuits , 1998 .