论文信息 - Traceability and on-site calibration of the NRC-MSS depolarization current measurements

Traceability and on-site calibration of the NRC-MSS depolarization current measurements

This paper describes the on-site calibration method of the NRC-MSS on-site depolarization current measurements, developed for condition assessment of medium voltage underground XLPE cables in the electric power distribution network. In this paper, a diagnostic-based and traceable calibration method that is more pertained to the health index of the cable-under-test and faster to conduct on-site is proposed. Preliminary measurements show an accuracy of better than 1% can be obtained, which is acceptable for such an application.

[1] M. Abou-Dakka. Towards a smart replacement strategy of power cables based on the depolarization principle , 2012, 2012 Annual Report Conference on Electrical Insulation and Dielectric Phenomena.

[2] Wang Fan,et al. An approach to power transformer asset management using health index , 2009, IEEE Electrical Insulation Magazine.

[3] A. Bulinski,et al. On-site diagnostics of medium-voltage underground cross-linked polyethylene cables , 2011, IEEE Electrical Insulation Magazine.

[4] A. Bulinski,et al. Backscattered electron imaging and energy-dispersive X-ray studies of water-treed polymeric insulation , 1990 .

[5] David B. Williams,et al. Backscattered Electron Imaging , 1990 .

[6] K. Assaleh,et al. Towards cost-effective maintenance of power transformer by accurately predicting its insulation condition , 2012, 2012 IEEE Electrical Power and Energy Conference.

[7] A. Bulinski,et al. Correlation between DC polarization and failure characteristics of XLPE and EPR aged with AC voltage in a wet environment , 2005, IEEE Transactions on Dielectrics and Electrical Insulation.

[8] W. S. Zaengl,et al. Dielectric spectroscopy in time and frequency domain for HV power equipment. I. Theoretical considerations , 2003 .