Relationship between friction parameters in a Coulomb–Tresca friction model for bulk metal forming

Abstract The ring compression test was employed to investigate the relationship between Coulomb friction coefficient and Tresca friction factor in a Coulomb–Tresca friction model. The results indicated that the ratio ( k ) of Coulomb friction coefficient to Tresca friction factor varies under lubricated and dry conditions. The ratio k can be described by a parabolic function under lubricated conditions and by an exponential function under dry condition. There is a transitional region between lubricated and dry conditions.

[1]  H. Francillette,et al.  An optimal forward extrusion device proposed for numerical and experimental analysis of materials tribological properties corresponding to bulk forming processes , 2012 .

[2]  Xincai Tan,et al.  Comparisons of friction models in bulk metal forming , 2002 .

[3]  G. Widera,et al.  Handbook of Metal Forming , 1985 .

[4]  Taylan Altan,et al.  Metal Forming : Fundamentals and Applications , 1983 .

[5]  Da-Wei Zhang,et al.  Analytical and numerical analyses of local loading forming process of T-shape component by using Coulomb, shear and hybrid friction models , 2015 .

[6]  Stefania Bruschi,et al.  Evaluation of friction condition in cold forging by using T-shape compression test , 2009 .

[7]  E. Ghassemali,et al.  Progressive microforming process: towards the mass production of micro-parts using sheet metal , 2013 .

[8]  Daw-Kwei Leu,et al.  A simple dry friction model for metal forming process , 2009 .

[9]  V.A.M. Cristino,et al.  Surface roughness and material strength of tribo-pairs in ring compression tests , 2011 .

[10]  Liliang Wang,et al.  Friction in aluminium extrusion—part 2: A review of friction models for aluminium extrusion , 2012 .

[11]  M. C. Lee,et al.  Effects of friction laws on metal forming processes , 2009 .

[12]  He Yang,et al.  Friction factor evaluation by FEM and experiment for TA15 titanium alloy in isothermal forming process , 2012 .

[13]  J. Hawkyard,et al.  An analysis of the changes in geometry of a short hollow cylinder during axial compression , 1967 .

[14]  Roman Pschera,et al.  Deviation of the results obtained from different commercial finite element solvers due to friction formulation , 2012 .

[15]  Study on compression forming of a rotating disk considering hybrid friction , 2002 .

[16]  G. Tzou,et al.  Analytical modified model of the cold bond rolling of unbounded double-layers sheet considering hybrid friction , 2003 .

[17]  A. T. Male,et al.  A Method for the Determination of the Coefficient of Friction of Metals under Conditions of Bulk Plastic Deformation , 1964 .

[18]  Yanchun Zhu,et al.  Determination of the friction factor of Ti-6Al-4V titanium alloy in hot forging by means of ring-compression test using FEM , 2011 .

[19]  Further evaluation of boric acid vis-à-vis other lubricants for cold forming applications , 2011 .

[20]  K. Min,et al.  Deformation characteristics at contact interface in ring compression , 2011 .

[21]  Hasan Sofuoglu,et al.  On the measurement of friction coefficient utilizing the ring compression test , 1999 .