A Casting Shrinkage Prediction Method Based on Model Automated Self-correction Strategy

[1]  Zhien Ma,et al.  Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings , 2023, International Journal of Metalcasting.

[2]  Shiping Wu,et al.  Optimization of investment casting process for K477 superalloy aero-engine turbine nozzle by simulation and experiment , 2022, China Foundry.

[3]  R. Contieri,et al.  The Effect of Cooling Rate on the Microstructure and Hardness of As-Cast Co-28Cr-6Mo Alloy Used as Biomedical Knee Implant , 2022, International Journal of Metalcasting.

[4]  Baode Sun,et al.  Comparison of various gating systems for investment casting of hydraulic retarder impeller with complex geometry , 2020 .

[5]  Soumyajit Roy,et al.  Precise filling time calculation of thin-walled investment casting in hot mold , 2020, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[6]  M. Brůna,et al.  Gating System Design Optimization for Investment Casting Process , 2019, Journal of Materials Engineering and Performance.

[7]  Li Xiaolin,et al.  Modeling of shrinkage during investment casting of thin-walled hollow turbine blades , 2017 .

[8]  Changhui Liu,et al.  Dimensional shrinkage prediction based on displacement field in investment casting , 2016 .

[9]  M. Raza,et al.  The Effect of Shell Thickness, Insulation and Casting Temperature on Defects Formation During Investment Casting of Ni-base Turbine Blades , 2015 .

[10]  Pei-Hsing Huang,et al.  Computer-aided modeling and experimental verification of optimal gating system design for investment casting of precision rotor , 2015 .

[11]  Franciszek Binczyk,et al.  Evaluation of Casting Shrinkage and Liquid Metal Fluidity of IN-713C Alloy , 2014 .

[12]  Emil J. Geiger,et al.  Development of an injection molding tool for complex microfluidic geometries , 2011 .

[13]  Adrian S. Sabau,et al.  Alloy Shrinkage Factors for the Investment Casting of 17-4PH Stainless Steel Parts , 2008 .

[14]  J. Jiang,et al.  Dimensional variations of castings and moulds in the ceramic mould casting process , 2007 .

[15]  A. Behravesh,et al.  An experimental investigation on dimensional stability of injected wax patterns of gas turbine blades , 2007 .

[16]  Adrian S. Sabau,et al.  Alloy shrinkage factors for the investment casting process , 2006 .

[17]  M. Antonelli,et al.  Cast Aluminum Mesostructures Using 3D Printed Sand Cores with an Encapsulation , 2015, International Journal of Metalcasting.

[18]  George-Christopher Vosniakos,et al.  Simulation-based selection of optimum pressure die-casting process parameters using neural nets and genetic algorithms , 2006 .