Wide-angle and broadband graded-refractive-index antireflection coatings

The design and fabrication of graded-refractive-index (GRIN) antireflection (AR) coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.

[1]  W H Southwell,et al.  Coating design using very thin high- and low-index layers. , 1985, Applied optics.

[2]  Hagen Bartzsch,et al.  Graded refractive index layer systems for antireflective coatings and rugate filters deposited by reactive pulse magnetron sputtering , 2004 .

[3]  Design of wideband graded-index antireflection coatings at oblique light incidence , 2012 .

[4]  M. Brett,et al.  Gradient-index narrow-bandpass filter fabricated with glancing-angle deposition. , 2004, Optics letters.

[5]  E Fred Schubert,et al.  Realization of a near-perfect antireflection coating for silicon solar energy utilization. , 2008, Optics letters.

[6]  Thomas Kirchartz,et al.  Rugate filter for light-trapping in solar cells. , 2008, Optics express.

[7]  E. Fred Schubert,et al.  Low-refractive-index materials - A new class of optical thin-film materials , 2007, 2009 Conference on Lasers and Electro-Optics and 2009 Conference on Quantum electronics and Laser Science Conference.

[8]  Willem L. Vos,et al.  Broad‐band and Omnidirectional Antireflection Coatings Based on Semiconductor Nanorods , 2009 .

[9]  Cheng-Yan Kao,et al.  An evolutionary algorithm for the synthesis of multilayer coatings at oblique light incidence , 2001 .

[10]  E. Fred Schubert,et al.  Nanostructured multilayer graded-index antireflection coating for Si solar cells with broadband and omnidirectional characteristics , 2008 .

[11]  Shen Zicai,et al.  Graded index broadband antireflection coating prepared by glancing angle deposition for a high-power laser system , 2010 .

[12]  L. Zighed,et al.  New designs for graded refractive index antireflection coatings , 2005 .

[13]  E. Fred Schubert,et al.  Optical thin-film materials with low refractive index for broadband elimination of Fresnel reflection , 2007 .

[14]  Cheng-Chung Lee,et al.  Rugate filter made with composite thin films by ion-beam sputtering. , 2006, Applied Optics.

[15]  R Feder,et al.  Graded-index AR surfaces produced by ion implantation on plastic materials. , 1980, Applied optics.

[16]  W H Southwell,et al.  Gradient-index antireflection coatings. , 1983, Optics letters.

[17]  T Motohiro,et al.  Thin film retardation plate by oblique deposition. , 1989, Applied optics.

[18]  Cheng Xu,et al.  Structure and optical properties of Nb2O5 sculptured thin films by glancing angle deposition , 2008 .

[19]  E. Schubert,et al.  Design of multilayer antireflection coatings made from co-sputtered and low-refractive-index materials by genetic algorithm. , 2008, Optics express.

[20]  H. Greiner.  Robust optical coating design with evolutionary strategies. , 1996, Applied optics.

[21]  Y. Kui,et al.  Wideband Antireflection Film Fabricated by Glancing Angle Deposition , 2005 .

[22]  S Martin,et al.  Synthesis of optical multilayer systems using genetic algorithms. , 1995, Applied optics.