Ionic liquid–activated wearable electronics

Abstract Wearable electronics have been attracting increasing attention because of the potential applications in health care and body motion monitoring. However, the existing wearable electronic devices often appear as an extra part of clothing and show limited compatibility with various textiles. Here, we report a general, low-cost, and easy operating approach to fabricate wearable sensors based on commercial or synthesized textiles, for which the textile itself is the active material for sensing, by loading with an ionic liquid on the fabric skeleton followed by depositing flexible electrodes. This is a general method that can activate many other daily used porous materials for sensing applications. Here, the textile or porous materials act as the elastic framework that allows for fast response (tens of milliseconds), whereas the ionic liquid plays the role of an active material to achieve high sensitivity (up to 10 kPa−1). The ionic liquid–activated wearable sensor allows for accurate monitoring of breathing, pulse wave, motion of the human joints, and plantar pressure. For clothing purpose, the sensor can be breathable, waterproof, washable, and antibacterial. This work provides a general strategy to make high-performance wearable electronics at low cost for health monitoring and motion detection.

[1]  Alessandro Chiolerio,et al.  Wearable Electronics and Smart Textiles: A Critical Review , 2014, Sensors.

[2]  Inkyu Park,et al.  Highly Sensitive, Flexible, and Wearable Pressure Sensor Based on a Giant Piezocapacitive Effect of Three-Dimensional Microporous Elastomeric Dielectric Layer. , 2016, ACS applied materials & interfaces.

[3]  Benjamin C. K. Tee,et al.  Flexible polymer transistors with high pressure sensitivity for application in electronic skin and health monitoring , 2013, Nature Communications.

[4]  Yaping Zang,et al.  Advances of flexible pressure sensors toward artificial intelligence and health care applications , 2015 .

[5]  Caofeng Pan,et al.  Flexible and Controllable Piezo‐Phototronic Pressure Mapping Sensor Matrix by ZnO NW/p‐Polymer LED Array , 2015 .

[6]  Yeh-Liang Hsu,et al.  A Review of Accelerometry-Based Wearable Motion Detectors for Physical Activity Monitoring , 2010, Sensors.

[7]  Silvia Conforto,et al.  Measurements of Generated Energy/Electrical Quantities from Locomotion Activities Using Piezoelectric Wearable Sensors for Body Motion Energy Harvesting , 2016, Sensors.

[8]  X. Tao,et al.  Fiber‐Based Wearable Electronics: A Review of Materials, Fabrication, Devices, and Applications , 2014, Advanced materials.

[9]  Yan Wang,et al.  A Highly Sensitive Flexible Capacitive Tactile Sensor with Sparse and High‐Aspect‐Ratio Microstructures , 2018 .

[10]  W. Nichols.  Clinical measurement of arterial stiffness obtained from noninvasive pressure waveforms. , 2005, American journal of hypertension.

[11]  Yan Wang,et al.  Recent progresses on flexible tactile sensors , 2017 .

[12]  T. Lodge,et al.  “Cut and Stick” Rubbery Ion Gels as High Capacitance Gate Dielectrics , 2012, Advanced materials.

[13]  Tingrui Pan,et al.  Droplet-based interfacial capacitive sensing. , 2012, Lab on a chip.

[14]  C. Guo,et al.  Thermal, Waterproof, Breathable, and Antibacterial Cloth with a Nanoporous Structure. , 2018, ACS applied materials & interfaces.

[15]  Carla Hertleer,et al.  Smart clothing: a new life , 2004 .

[16]  Conor J. Walsh,et al.  A Highly Sensitive Capacitive‐Based Soft Pressure Sensor Based on a Conductive Fabric and a Microporous Dielectric Layer , 2018 .

[17]  Sung Kyu Park,et al.  Recent Progress of Textile-Based Wearable Electronics: A Comprehensive Review of Materials, Devices, and Applications. , 2018, Small.

[18]  Choon-Gi Choi,et al.  High Durability and Waterproofing rGO/SWCNT-Fabric-Based Multifunctional Sensors for Human-Motion Detection. , 2018, ACS applied materials & interfaces.

[19]  Cunjiang Yu,et al.  Crack-Insensitive Wearable Electronics Enabled Through High-Strength Kevlar Fabrics , 2015, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[20]  Subhas Chandra Mukhopadhyay,et al.  Wearable Sensors for Human Activity Monitoring: A Review , 2015, IEEE Sensors Journal.

[21]  N. Pan,et al.  Supercapacitive Iontronic Nanofabric Sensing , 2017, Advanced materials.

[22]  Z. Ren,et al.  Capillary-Force-Induced Cold Welding in Silver-Nanowire-Based Flexible Transparent Electrodes. , 2017, Nano letters.

[23]  B. Shirinzadeh,et al.  A wearable and highly sensitive pressure sensor with ultrathin gold nanowires , 2014, Nature Communications.

[24]  Ja Hoon Koo,et al.  Conductive Fiber‐Based Ultrasensitive Textile Pressure Sensor for Wearable Electronics , 2015, Advanced materials.

[25]  Zhenan Bao,et al.  Skin-inspired electronic devices , 2014 .

[26]  T. Ren,et al.  Surface-modified piezoresistive nanocomposite flexible pressure sensors with high sensitivity and wide linearity. , 2015, Nanoscale.

[27]  P. Ajayan,et al.  Flexible piezoelectric ZnO-paper nanocomposite strain sensor. , 2010, Small.

[28]  Zhong Lin Wang,et al.  Self-powered textile for wearable electronics by hybridizing fiber-shaped nanogenerators, solar cells, and supercapacitors , 2016, Science Advances.

[29]  Hong Wang,et al.  Ionic Skin with Biomimetic Dielectric Layer Templated from Calathea Zebrine Leaf , 2018, Advanced Functional Materials.

[30]  Yan Wang,et al.  A review of sensor selection, sensor devices and sensor deployment for wearable sensor-based human activity recognition systems , 2016, 2016 10th International Conference on Software, Knowledge, Information Management & Applications (SKIMA).

[31]  Tingting Yang,et al.  Wearable and Highly Sensitive Graphene Strain Sensors for Human Motion Monitoring , 2014 .

[32]  Tingrui Pan,et al.  Iontronic microdroplet array for flexible ultrasensitive tactile sensing. , 2014, Lab on a chip.