Demonstration of optimizing piezoelectric polarization in the design of a flextensional actuator

Much effort has gone into amplifying the displacements of actuators built around piezoelectric materials (PZTs). Some researchers have used topology optimization to design compliant mechanisms that best magnify either the geometric or mechanical advantage of piezoelectric wafers or “stack” actuators. PZTs are generally poled through the “thin” direction, so actuation by an electric field in that direction only induces eigenstrains normal to the free edges. Some researchers have shown advantages of “shear mode” actuation, and material scientists have demonstrated the ability to pole a PZT in an arbitrary direction. This work attempts to justify the inclusion of the PZT polarization vector as a design variable in the design of a flextensional actuator. We present two examples based on the “cymbal” actuator: one using a simplified model to justify off-angle polarization and another using the polarization vector as a design variable to optimize the topology of a compliant mechanism.

[1]  Romesh C. Batra,et al.  Analysis of piezoelectric bimorphs and plates with segmented actuators , 2001 .

[2]  Romesh C. Batra,et al.  Exact Solution for Rectangular Sandwich Plates with Embedded Piezoelectric Shear Actuators , 2001 .

[3]  Roger Ohayon,et al.  A Unified Beam Finite Element Model for Extension and Shear Piezoelectric Actuation Mechanisms , 1997 .

[4]  Noboru Kikuchi,et al.  Optimization methods applied to material and flextensional actuator design using the homogenization method , 1999 .

[5]  Noboru Kikuchi,et al.  TOPOLOGY OPTIMIZATION OF COMPLIANT MECHANISMS USING THE HOMOGENIZATION METHOD , 1998 .

[6]  C. S. Jog,et al.  Stability of finite element models for distributed-parameter optimization and topology design , 1996 .

[7]  M. Zhou,et al.  The COC algorithm, Part II: Topological, geometrical and generalized shape optimization , 1991 .

[8]  Ole Sigmund,et al.  On the Design of Compliant Mechanisms Using Topology Optimization , 1997 .

[9]  Mary Frecker,et al.  Dynamic Topology Optimization of Compliant Mechanisms and Piezoceramic Actuators , 2004 .

[10]  Inderjit Chopra,et al.  TRAILING EDGE FLAP CONTROL METHODOLOGY FOR VIBRATION REDUCTION OF HELICOPTER WITH DISSIMILAR BLADES , 2001 .

[11]  Hejun Du,et al.  Convex analysis for topology optimization of compliant mechanisms , 2001 .

[12]  Mary Frecker,et al.  Topology optimization of compliant mechanical amplifiers for piezoelectric actuators , 2000 .

[13]  M. Bendsøe,et al.  Material interpolation schemes in topology optimization , 1999 .

[14]  Mary Frecker,et al.  Topology optimization of compliant mechanisms with multiple outputs , 1999 .

[15]  N. Kikuchi,et al.  Topology optimization design of flextensional actuators , 2000, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[16]  Norman A. Fleck,et al.  Multi-axial electrical switching of a ferroelectric: theory versus experiment , 2001 .

[17]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[18]  Mary Irene Frecker,et al.  Optimal design of compliant mechanisms. , 1997 .

[19]  T. Ikeda.  Fundamentals of piezoelectricity , 1990 .

[20]  C. Sun,et al.  Use of thickness-shear mode in adaptive sandwich structures , 1995 .

[21]  T. Hughes,et al.  Finite element method for piezoelectric vibration , 1970 .

[22]  Sridhar Kota,et al.  Static Shape Control of Smart Structures Using Compliant Mechanisms , 1999 .

[23]  R. Cook,et al.  Concepts and Applications of Finite Element Analysis , 1974 .

[24]  R.E. Newnham,et al.  Composite piezoelectric transducer with truncated conical endcaps "cymbal" , 1997, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.