An extended discrete element method for the estimation of contact pressure at the ankle joint during stance phase
暂无分享,去创建一个
Marco Viceconti | Lingzhong Guo | Luca Modenese | Damien Lacroix | Claudia Mazzà | Erica Montefiori | Ivan Benemerito | C. Mazzà | M. Viceconti | D. Lacroix | L. Modenese | Lingzhong Guo | E. Montefiori | I. Benemerito | Ivan Benemerito
[1] Paolo Cignoni,et al. MeshLab: an Open-Source Mesh Processing Tool , 2008, Eurographics Italian Chapter Conference.
[2] G. Windisch,et al. Contact areas of the tibiotalar joint , 2007, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[3] V Parenti-Castelli,et al. A new one-DOF fully parallel mechanism for modelling passive motion at the human tibiotalar joint. , 2009, Journal of biomechanics.
[4] Benjamin J Ellis,et al. Finite element prediction of cartilage contact stresses in normal human hips , 2012, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[5] Steve A Maas,et al. A new discrete element analysis method for predicting hip joint contact stresses. , 2013, Journal of biomechanics.
[6] Andrew M. Kern,et al. Expedited patient-specific assessment of contact stress exposure in the ankle joint following definitive articular fracture reduction. , 2015, Journal of biomechanics.
[7] K. Berbaum,et al. Effects of medial and lateral displacement calcaneal osteotomies on tibiotalar joint contact stresses , 1996, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[8] K. An,et al. The role of ankle ligaments and articular geometry in stabilizing the ankle. , 2012, Clinical biomechanics.
[9] S. Siegler,et al. The Mechanical Characteristics of the Collateral Ligaments of the Human Ankle Joint* , 1988, Foot & ankle.
[10] H. Willenegger,et al. Gelenkmechanische Untersuchungen zum problem der posttraumatischen Arthrosen im oberen Sprunggelenk , 1973, Langenbecks Archiv für Chirurgie.
[11] Benjamin J. Ellis,et al. Validation of finite element predictions of cartilage contact pressure in the human hip joint. , 2008, Journal of biomechanical engineering.
[12] In vitro measurement of intraarticular pressure in the ankle joint , 2010, Knee Surgery, Sports Traumatology, Arthroscopy.
[13] Thomas D Brown,et al. Joint injury, repair, and remodeling: roles in post-traumatic osteoarthritis. , 2004, Clinical orthopaedics and related research.
[14] Stefan Wesarg,et al. Investigation of the dependence of joint contact forces on musculotendon parameters using a codified workflow for image-based modelling. , 2018, Journal of biomechanics.
[15] Lu Wan,et al. Determination of real-time in-vivo cartilage contact deformation in the ankle joint. , 2008, Journal of biomechanics.
[16] M. Hull,et al. A finite element model of the human knee joint for the study of tibio-femoral contact. , 2002, Journal of biomechanical engineering.
[17] J. Weiss,et al. ARTICLE IN PRESS Journal of Biomechanics 43 (2010) 1351–1357 Contents lists available at ScienceDirect , 2022 .
[18] E. Chao,et al. Normal hip joint contact pressure distribution in single-leg standing--effect of gender and anatomic parameters. , 2001, Journal of biomechanics.
[19] Stefan Wesarg,et al. An image-based kinematic model of the tibiotalar and subtalar joints and its application to gait analysis in children with Juvenile Idiopathic Arthritis. , 2019, Journal of biomechanics.
[20] Harry E Rubash,et al. In vivo cartilage contact deformation of human ankle joints under full body weight , 2008, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[21] Hartmut Witte,et al. ISB recommendation on definitions of joint coordinate system of various joints for the reporting of human joint motion--part I: ankle, hip, and spine. International Society of Biomechanics. , 2002, Journal of biomechanics.
[22] J. Michelson,et al. Intra-articular Load Distribution in the Human Ankle Joint During Motion , 2001, Foot & ankle international.
[23] Donald D Anderson,et al. Discrete element analysis is a valid method for computing joint contact stress in the hip before and after acetabular fracture. , 2018, Journal of biomechanics.
[24] Christensen Jc,et al. Contact characteristics of the ankle joint. Part 1. The normal joint. , 1994 .
[25] Thomas D Brown,et al. Tensile Engagement of the Peri-Ankle Ligaments in Stance Phase , 2005, Foot & ankle international.
[26] K. An,et al. Pressure distribution on articular surfaces: application to joint stability evaluation. , 1990, Journal of biomechanics.
[27] W. Krause,et al. Effect of Isolated Talocalcaneal Fusion on Contact in the Ankle and Talonavicular Joints , 1991, Foot & ankle.
[28] J. Udupa,et al. Mechanics of the ankle and subtalar joints revealed through a 3D quasi-static stress MRI technique. , 2005, Journal of biomechanics.
[29] L. S. Matthews,et al. The joint-contact area of the ankle. The contribution of the posterior malleolus. , 1991, The Journal of bone and joint surgery. American volume.
[30] Thomas D. Brown,et al. Finite Element Modeling in Musculoskeletal Biomechanics , 2004 .
[31] L. P. Li,et al. A human knee joint model considering fluid pressure and fiber orientation in cartilages and menisci. , 2011, Medical engineering & physics.
[32] Freddie H. Fu,et al. Intraarticular contact stresses with simulated ankle malunions. , 1990 .
[33] Howard J. Hillstrom,et al. Three-dimensional, six-degrees-of-freedom kinematics of the human hindfoot during the stance phase of level walking , 1997 .
[34] David R Wilson,et al. Evaluation of a computational model used to predict the patellofemoral contact pressure distribution. , 2004, Journal of biomechanics.
[35] Ajay Seth,et al. Is my model good enough? Best practices for verification and validation of musculoskeletal models and simulations of movement. , 2015, Journal of biomechanical engineering.
[36] E. Chao,et al. Three-dimensional dynamic hip contact area and pressure distribution during activities of daily living. , 2006, Journal of biomechanics.
[37] Farzam Farahmand,et al. A detailed and validated three dimensional dynamic model of the patellofemoral joint. , 2012, Journal of biomechanical engineering.
[38] E. Chao,et al. A comparison of different methods in predicting static pressure distribution in articulating joints. , 1997, Journal of biomechanics.
[39] C. Saltzman,et al. Contribution of articular surface geometry to ankle stabilization. , 2006, The Journal of bone and joint surgery. American volume.
[40] Gerard A Ateshian,et al. Equivalence between short-time biphasic and incompressible elastic material responses. , 2007, Journal of biomechanical engineering.
[41] S L Woo,et al. A validated three-dimensional computational model of a human knee joint. , 1999, Journal of biomechanical engineering.
[42] K Y Volokh,et al. On foundations of discrete element analysis of contact in diarthrodial joints. , 2007, Molecular & cellular biomechanics : MCB.
[43] T. Brown,et al. The effects of contact pressure elevations and aseptic necrosis on the long‐term outcome of congenital hip dislocation , 1990, Journal of Orthopaedic Research.
[44] J. Crandall,et al. Quantification of ankle articular cartilage topography and thickness using a high resolution stereophotography system. , 2007, Osteoarthritis and cartilage.
[45] A. Leardini,et al. Analysis of surface-to-surface distance mapping during three-dimensional motion at the ankle and subtalar joints. , 2018, Journal of biomechanics.
[46] K. Siegel,et al. In Vivo Talocrural and Subtalar Kinematics: A Non-invasive 3D Dynamic MRI Study , 2007, Foot & ankle international.
[47] T. Brown,et al. Patient‐specific finite element analysis of chronic contact stress exposure after intraarticular fracture of the tibial plafond , 2008, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[48] Ahmad Chitsazan,et al. Assessment of stress distribution in ankle joint: simultaneous application of experimental and finite element methods , 2015 .
[49] Dan K Ramsey,et al. Biomechanics of the knee: methodological considerations in the in vivo kinematic analysis of the tibiofemoral and patellofemoral joint. , 1999, Clinical biomechanics.
[50] M. Sofonea,et al. Mathematical Models in Contact Mechanics , 2012 .
[51] S F Viegas,et al. A Comprehensive Study of Pressure Distribution in the Ankle Joint with Inversion and Eversion , 1994, Foot & ankle international.
[52] Matthew S. DeMers,et al. Compressive tibiofemoral force during crouch gait. , 2012, Gait & posture.
[53] R. Crowninshield,et al. A physiologically based criterion of muscle force prediction in locomotion. , 1981, Journal of biomechanics.
[54] T. Alonso-Rasgado,et al. 3-D computer modelling of malunited posterior malleolar fractures: effect of fragment size and offset on ankle stability, contact pressure and pattern , 2017, Journal of Foot and Ankle Research.
[55] T. Brown,et al. Is elevated contact stress predictive of post‐traumatic osteoarthritis for imprecisely reduced tibial plafond fractures? , 2011, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[56] John T. Campbell,et al. Prediction of Three-Dimensional Contact Stress and Ligament Tension in the Ankle During Stance Determined from Computational Modeling , 2009, Foot & ankle international.
[57] T. Fukubayashi,et al. Load-bearing pattern of the ankle joint , 2005, Archives of orthopaedic and traumatic surgery.
[58] Thomas D Brown,et al. Physical validation of a patient-specific contact finite element model of the ankle. , 2007, Journal of biomechanics.
[59] J. Bruns,et al. Pressure distribution at the ankle joint. , 1990, Clinical biomechanics.
[60] Thomas D Brown,et al. Intra-articular Contact Stress Distributions at the Ankle Throughout Stance Phase–patient-specific Finite Element Analysis as a Metric of Degeneration Propensity , 2006, Biomechanics and modeling in mechanobiology.
[61] P. Ramsey,et al. Changes in tibiotalar area of contact caused by lateral talar shift. , 1976, The Journal of bone and joint surgery. American volume.
[62] Rami K Korhonen,et al. Compressive and tensile properties of articular cartilage in axial loading are modulated differently by osmotic environment. , 2010, Medical engineering & physics.
[63] T. Theologis,et al. Repeatability of a model for measuring multi-segment foot kinematics in children. , 2006, Gait & posture.
[64] A Shirazi-Adl,et al. Strain-rate dependent stiffness of articular cartilage in unconfined compression. , 2003, Journal of biomechanical engineering.
[65] Ayman Habib,et al. OpenSim: Open-Source Software to Create and Analyze Dynamic Simulations of Movement , 2007, IEEE Transactions on Biomedical Engineering.
[66] Fulvia Taddei,et al. nmsBuilder: Freeware to create subject-specific musculoskeletal models for OpenSim , 2017, Comput. Methods Programs Biomed..