Detecting crack and damage location in self-sensing fiber reinforced cementitious composites

[1]  Dong Joo Kim,et al.  Self-stress sensing smart concrete containing fine steel slag aggregates and steel fibers under high compressive stress , 2019, Construction and Building Materials.

[2]  Dong Joo Kim,et al.  Effects of Matrix Strength, Fiber Type, and Fiber Content on the Electrical Resistivity of Steel-Fiber-Reinforced Cement Composites During Fiber Pullout , 2019 .

[3]  Filippo Ubertini,et al.  Automated crack detection in conductive smart-concrete structures using a resistor mesh model , 2018 .

[4]  Min Kyoung Kim,et al.  Electro-mechanical self-sensing response of ultra-high-performance fiber-reinforced concrete in tension , 2018 .

[5]  Filippo Ubertini,et al.  Damage detection, localization and quantification in conductive smart concrete structures using a resistor mesh model , 2017 .

[6]  M. Şahmaran,et al.  Assessment of self-sensing capability of Engineered Cementitious Composites within the elastic and plastic ranges of cyclic flexural loading , 2017 .

[7]  Ilhwan You,et al.  Electrical Properties of Cement-Based Composites with Carbon Nanotubes, Graphene, and Graphite Nanofibers , 2017, Sensors.

[8]  Savaş Erdem,et al.  Self-sensing damage assessment and image-based surface crack quantification of carbon nanofibre reinforced concrete , 2017 .

[9]  K. Kuang,et al.  Crack sensing and healing in concrete beams based on wire-crack sensors and healing tube , 2017 .

[10]  Cristian-Claudiu Comisu,et al.  Structural health monitoring system of bridges , 2017 .

[11]  Surendra P. Shah,et al.  Strength, energy absorption capability and self-sensing properties of multifunctional carbon nanotube reinforced mortars , 2016 .

[12]  Hui Luo,et al.  Sensitivity of embedded active PZT sensor for concrete structural impact damage detection , 2016 .

[13]  M. Nuawi,et al.  Ultrasonic Surface Wave Monitoring for Steel Fibre-Reinforced Concrete Using Gel-Coupled Piezoceramic Sensors: A Case Study , 2016 .

[14]  Mustafa Şahmaran,et al.  Effect of mixing methods on the electrical properties of cementitious composites incorporating different carbon-based materials , 2016 .

[15]  Yoshiro Suzuki,et al.  Impact damage detection of a carbon-fibre-reinforced-polymer plate employing self-sensing time-domain reflectometry , 2015 .

[16]  Marc Quiertant,et al.  Qualification of a distributed optical fiber sensor bonded to the surface of a concrete structure: a methodology to obtain quantitative strain measurements , 2015 .

[17]  Duy‐Liem Nguyen,et al.  Comparative electromechanical damage-sensing behaviors of six strain-hardening steel fiber-reinforced cementitious composites under direct tension , 2015 .

[18]  Branko Glisic,et al.  Analysis of the status of pre-release cracks in prestressed concrete structures using long-gauge sensors , 2015 .

[19]  Dong Joo Kim,et al.  Effect of fiber volume content on electromechanical behavior of strain-hardening steel-fiber-reinforced cementitious composites , 2015 .

[20]  Baoguo Han,et al.  Intrinsic self-sensing concrete and structures: A review , 2015 .

[21]  Jerome P. Lynch,et al.  Influence of micro-cracking on the composite resistivity of Engineered Cementitious Composites , 2014 .

[22]  Nemkumar Banthia,et al.  Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing , 2012 .

[23]  Song,et al.  Electrical Resistivity of High Performance Fiber Reinforced Cementitious Composites in Tension , 2012 .

[24]  Maria Feng,et al.  Sensing optical fiber installation study for crack identification using a stimulated Brillouin-based strain sensor , 2012 .

[25]  Eil Kwon,et al.  Nickel particle-based self-sensing pavement for vehicle detection , 2011 .

[26]  Antoine E. Naaman,et al.  Strain-hardening UHP-FRC with low fiber contents , 2011 .

[27]  Jerome P. Lynch,et al.  Mechanical and electrical characterization of self-sensing carbon black ECC , 2011, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[28]  Antoine E. Naaman,et al.  High Performance Fiber Reinforced Cement Composites with Innovative Slip Hardending Twisted Steel Fibers , 2009 .

[29]  E. Kwon,et al.  A self-sensing carbon nanotube/cement composite for traffic monitoring , 2009, Nanotechnology.

[30]  Jerome P. Lynch,et al.  Electrical Impedance Tomographic Methods for Sensing Strain Fields and Crack Damage in Cementitious Structures , 2009 .

[31]  Faezeh Azhari,et al.  Cement-based sensors for structural health monitoring , 2008 .

[32]  Meng-Tsan Tsai,et al.  Fiber optic in-line distributed sensor for detection and localization of the pipeline leaks , 2007 .

[33]  D. Chung,et al.  Piezoresistive Cement-Based Materials for Strain Sensing , 2002 .

[34]  D.D.L. Chung,et al.  Uniaxial compression in carbon fiber-reinforced cement, sensed by electrical resistivity measurement in longitudinal and transverse directions , 2000 .

[35]  Farhad Ansari,et al.  Fiber optic acoustic emission distributed crack sensor for large structures , 2000 .

[36]  D.D.L. Chung,et al.  Damage in carbon fiber-reinforced concrete, monitored by electrical resistance measurement , 2000 .

[37]  D.D.L. Chung,et al.  Carbon fiber-reinforced concrete for traffic monitoring and weighing in motion , 1999 .

[38]  D.D.L. Chung,et al.  Improving the strain-sensing ability of carbon fiber-reinforced cement by ozone treatment of the fibers , 1998 .

[39]  D.D.L. Chung,et al.  Concrete as a new strain/stress sensor , 1996 .