Evidence for Voltage-Driven Set/Reset Processes in Bipolar Switching RRAM

Understanding the physical mechanisms for resistance change in metal oxides is a key challenge to assess the scalability of resistive-switching random access memory (RRAM) devices. From this standpoint, the time dependence of filament formation and dissolution in metal oxides can provide a useful insight into the fundamental mechanism of resistive switching. In this paper, we show an experimental study of the time-dependent filament growth and of the voltage dependence of set/reset times in HfO_x-based RRAM devices. The voltage across the device is shown to be regulated at any given time irrespective of the compliance current and the applied voltage, evidencing that voltage is the controlling parameter for the filament formation and dissolution during switching. These results are explained in terms of a thermally-activated ion migration model for filamentary switching. The model allows for an analytical calculation of the scaling dependence of set/reset times and energies in RRAM.

[1]  R. Dittmann,et al.  Origin of the Ultra‐nonlinear Switching Kinetics in Oxide‐Based Resistive Switches , 2011 .

[2]  D. Ielmini.  Filamentary-switching model in RRAM for time, energy and scaling projections , 2011, 2011 International Electron Devices Meeting.

[3]  D. Ielmini,et al.  Complementary switching in metal oxides: Toward diode-less crossbar RRAMs , 2011, 2011 International Electron Devices Meeting.

[4]  O. Richard,et al.  10×10nm2 Hf/HfOx crossbar resistive RAM with excellent performance, reliability and low-energy operation , 2011, 2011 International Electron Devices Meeting.

[5]  Shimeng Yu,et al.  On the stochastic nature of resistive switching in metal oxide RRAM: Physical modeling, monte carlo simulation, and experimental characterization , 2011, 2011 International Electron Devices Meeting.

[6]  D. Ielmini,et al.  Modeling the Universal Set/Reset Characteristics of Bipolar RRAM by Field- and Temperature-Driven Filament Growth , 2011, IEEE Transactions on Electron Devices.

[7]  Kinam Kim,et al.  A fast, high-endurance and scalable non-volatile memory device made from asymmetric Ta2O(5-x)/TaO(2-x) bilayer structures. , 2011, Nature materials.

[8]  D. Ielmini,et al.  Universal Reset Characteristics of Unipolar and Bipolar Metal-Oxide RRAM , 2011, IEEE Transactions on Electron Devices.

[9]  Hyunsang Hwang,et al.  Resistive switching characteristics of ultra-thin TiOx , 2011 .

[10]  Daniele Ielmini,et al.  Filament diffusion model for simulating reset and retention processes in RRAM , 2011 .

[11]  D. Ielmini,et al.  Physical models of size-dependent nanofilament formation and rupture in NiO resistive switching memories , 2011, Nanotechnology.

[12]  R. Waser,et al.  Thermochemical resistive switching: materials, mechanisms, and scaling projections , 2011 .

[13]  D. Gilmer,et al.  Effects of RRAM Stack Configuration on Forming Voltage and Current Overshoot , 2011, 2011 3rd IEEE International Memory Workshop (IMW).

[14]  Heng-Yuan Lee,et al.  Resistance switching for RRAM applications , 2011, Science China Information Sciences.

[15]  D Ielmini,et al.  Reset Instability in Pulsed-Operated Unipolar Resistive-Switching Random Access Memory Devices , 2011, IEEE Electron Device Letters.

[16]  R Rosezin,et al.  Crossbar Logic Using Bipolar and Complementary Resistive Switches , 2011, IEEE Electron Device Letters.

[17]  Daniele Ielmini,et al.  Control of filament size and reduction of reset current below 10 μA in NiO resistance switching memories , 2011 .

[18]  Shimeng Yu,et al.  Compact Modeling of Conducting-Bridge Random-Access Memory (CBRAM) , 2011, IEEE Transactions on Electron Devices.

[19]  Shimeng Yu,et al.  Investigating the switching dynamics and multilevel capability of bipolar metal oxide resistive switching memory , 2011 .

[20]  J. Yang,et al.  High switching endurance in TaOx memristive devices , 2010 .

[21]  Frederick T. Chen,et al.  Evidence and solution of over-RESET problem for HfOX based resistive memory with sub-ns switching speed and high endurance , 2010, 2010 International Electron Devices Meeting.

[22]  C. Hu,et al.  9nm half-pitch functional resistive memory cell with <1µA programming current using thermally oxidized sub-stoichiometric WOx film , 2010, 2010 International Electron Devices Meeting.

[23]  Hyunsang Hwang,et al.  Diode-less nano-scale ZrOx/HfOx RRAM device with excellent switching uniformity and reliability for high-density cross-point memory applications , 2010, 2010 International Electron Devices Meeting.

[24]  H. Wong,et al.  $\hbox{Al}_{2}\hbox{O}_{3}$-Based RRAM Using Atomic Layer Deposition (ALD) With 1-$\mu\hbox{A}$ RESET Current , 2010, IEEE Electron Device Letters.

[25]  Stephan Menzel,et al.  Memory Devices: Energy–Space–Time Tradeoffs , 2010, Proceedings of the IEEE.

[26]  Rainer Waser,et al.  Complementary resistive switches for passive nanocrossbar memories. , 2010, Nature materials.

[27]  D. Suh,et al.  Pulse-Programming Instabilities of Unipolar-Type NiOx , 2010, IEEE Electron Device Letters.

[28]  Daniele Ielmini,et al.  Reset–Set Instability in Unipolar Resistive-Switching Memory , 2010, IEEE Electron Device Letters.

[29]  Gregory S. Snider,et al.  ‘Memristive’ switches enable ‘stateful’ logic operations via material implication , 2010, Nature.

[30]  D. Ielmini,et al.  Size-Dependent Retention Time in NiO-Based Resistive-Switching Memories , 2010, IEEE Electron Device Letters.

[31]  Frederick T. Chen,et al.  Low-Power and Nanosecond Switching in Robust Hafnium Oxide Resistive Memory With a Thin Ti Cap , 2010, IEEE Electron Device Letters.

[32]  D. Ielmini,et al.  Modeling of Set/Reset Operations in NiO-Based Resistive-Switching Memory Devices , 2009, IEEE Transactions on Electron Devices.

[33]  R. Dittmann,et al.  Redox‐Based Resistive Switching Memories – Nanoionic Mechanisms, Prospects, and Challenges , 2009, Advanced materials.

[34]  D. Stewart,et al.  The missing memristor found , 2009, Nature.

[35]  D. Ielmini,et al.  Study of Multilevel Programming in Programmable Metallization Cell (PMC) Memory , 2009, IEEE Transactions on Electron Devices.

[36]  D. Ielmini,et al.  Resistance transition in metal oxides induced by electronic threshold switching , 2009 .

[37]  D. Ielmini,et al.  Self-Accelerated Thermal Dissolution Model for Reset Programming in Unipolar Resistive-Switching Memory (RRAM) Devices , 2009, IEEE Transactions on Electron Devices.

[38]  R. Meyer,et al.  Oxide dual-layer memory element for scalable non-volatile cross-point memory technology , 2008, 2008 9th Annual Non-Volatile Memory Technology Symposium (NVMTS).

[39]  Frederick T. Chen,et al.  Low power and high speed bipolar switching with a thin reactive Ti buffer layer in robust HfO2 based RRAM , 2008, 2008 IEEE International Electron Devices Meeting.

[40]  K. Tsunoda,et al.  Reduction in the reset current in a resistive random access memory consisting of NiOx brought about by reducing a parasitic capacitance , 2008 .

[41]  K. Tsunoda,et al.  Low Power and High Speed Switching of Ti-doped NiO ReRAM under the Unipolar Voltage Source of less than 3 V , 2007, 2007 IEEE International Electron Devices Meeting.

[42]  I. Yoo,et al.  2-stack 1D-1R Cross-point Structure with Oxide Diodes as Switch Elements for High Density Resistance RAM Applications , 2007, 2007 IEEE International Electron Devices Meeting.

[43]  C. Gopalan,et al.  Erase mechanism for copper oxide resistive switching memory cells with nickel electrode , 2006, 2006 International Electron Devices Meeting.

[44]  U-In Chung,et al.  Improvement of resistive memory switching in NiO using IrO2 , 2006 .

[45]  S. O. Park,et al.  Highly scalable nonvolatile resistive memory using simple binary oxide driven by asymmetric unipolar voltage pulses , 2004, IEDM Technical Digest. IEEE International Electron Devices Meeting, 2004..

[46]  Yi-Chou Chen,et al.  An access-transistor-free (0T/1R) non-volatile resistance random access memory (RRAM) using a novel threshold switching, self-rectifying chalcogenide device , 2003, IEEE International Electron Devices Meeting 2003.