Drag reduction by polymer additives in a turbulent channel flow

Turbulent drag reduction by polymer additives in a channel is investigated using direct numerical simulation. The dilute polymer solution is expressed with an Oldroyd-B model that shows a linear elastic behaviour. Simulations are carried out by changing the Weissenberg number at the Reynolds numbers of 4000 and 20 000 based on the bulk velocity and channel height. The onset criterion for drag reduction predicted in the present study shows a good agreement with previous theoretical and experimental studies. In addition, the flow statistics such as the r.m.s. velocity fluctuations are also in good agreement with previous experimental observations. The onset mechanism of drag reduction is interpreted based on elastic theory, which is one of the most plausible hypotheses suggested in the past. The transport equations for the kinetic and elastic energy are derived for the first time. It is observed that the polymer stores the elastic energy from the flow very near the wall and then releases it there when the relaxation time is short, showing no drag reduction. However, when the relaxation time is long enough, the elastic energy stored in the very near-wall region is transported to and released in the buffer and log layers, showing a significant amount of drag reduction.

[1]  Daniel D. Joseph,et al.  Fluid Dynamics Of Viscoelastic Liquids , 1990 .

[2]  Christopher White,et al.  The onset of drag reduction by dilute polymer additives, and the maximum drag reduction asymptote , 2000, Journal of Fluid Mechanics.

[3]  John L. Lumley,et al.  Drag Reduction by Additives , 1969 .

[4]  Erik Mollo-Christensen,et al.  The Toms phenomenon: turbulent pipe flow of dilute polymer solutions , 1967, Journal of Fluid Mechanics.

[5]  Thomas J. Hanratty,et al.  Influence of drag-reducing polymers on turbulence: effects of Reynolds number, concentration and mixing , 1999 .

[6]  Antony N. Beris,et al.  Direct numerical simulation of viscoelastic turbulent channel flow exhibiting drag reduction: effect of the variation of rheological parameters , 1998 .

[7]  Parviz Moin,et al.  Direct numerical simulation of turbulent flow over riblets , 1993, Journal of Fluid Mechanics.

[8]  Haecheon Choi,et al.  Turbulent Drag Reduction: Studies of Feedback Control and Flow Over Riblets , 1993 .

[9]  A. I. Tolstykh,et al.  On Performance of Methods with Third- and Fifth-Order Compact Upwind Differencing , 1998 .

[10]  Paolo Orlandi,et al.  A tentative approach to the direct simulation of drag reduction by polymers , 1995 .

[11]  N. Berman.  Flow time scales and drag reduction , 1977 .

[12]  S. Lele,et al.  Direct numerical simulation of polymer flow , 2001 .

[13]  P. Pincus.  Excluded Volume Effects and Stretched Polymer Chains , 1976 .

[14]  Ma Martien Hulsen,et al.  Drag reduction by polymer additives in a turbulent pipe flow: numerical and laboratory experiments , 1997, Journal of Fluid Mechanics.

[15]  P. G. de Gennes,et al.  A Cascade Theory of Drag Reduction , 1986 .

[16]  Jung Yul Yoo,et al.  Maximum drag reduction in a turbulent channel flow by polymer additives , 2002, Journal of Fluid Mechanics.

[17]  D. Joseph,et al.  Independent confirmation that delayed die swell is a hyperbolic transition , 1993 .

[18]  J. Yoo,et al.  Effect of spatial discretization schemes on numerical solutions of viscoelastic fluid flows , 2001 .

[19]  Douglas E. Smith,et al.  Response of flexible polymers to a sudden elongational flow , 1998, Science.

[20]  J. L. Zakin,et al.  A molecular approach to predicting the onset of drag reduction in the turbulent flow of dilute polymer solutions , 1967 .

[21]  Robert A. Handler,et al.  Direct numerical simulation of the turbulent channel flow of a polymer solution , 1997 .

[22]  W. G. Tiederman,et al.  Turbulent structure in low-concentration drag-reducing channel flows , 1988, Journal of Fluid Mechanics.

[23]  T. J. Hanratty,et al.  Added stresses because of the presence of FENE-P bead–spring chains in a random velocity field , 1997, Journal of Fluid Mechanics.

[24]  P. Moin,et al.  The minimal flow unit in near-wall turbulence , 1991, Journal of Fluid Mechanics.

[25]  P. Gennes,et al.  Introduction to polymer dynamics , 1990 .

[26]  A. Tsinober,et al.  On the rheological nature of drag reduction phenomena , 1997 .

[27]  van den Bhaa Ben Brule,et al.  Turbulent channel flow near maximum drag reduction: simulations, experiments and mechanisms , 2003, Journal of Fluid Mechanics.

[28]  E. J. Hinch,et al.  Mechanical models of dilute polymer solutions in strong flows , 1977 .

[29]  Olivier Cadot,et al.  Turbulent drag reduction in a closed flow system: Boundary layer versus bulk effects , 1998 .

[30]  V. Shtern,et al.  Simplified theory of the near-wall turbulent layer of Newtonian and drag-reducing fluids , 1982, Journal of Fluid Mechanics.

[31]  John L. Lumley,et al.  Drag reduction in turbulent flow by polymer additives , 1973 .

[32]  P. S. Virk.  An elastic sublayer model for drag reduction by dilute solutions of linear macromolecules , 1971, Journal of Fluid Mechanics.

[33]  Parviz Moin,et al.  Active turbulence control for drag reduction in wall-bounded flows , 1994, Journal of Fluid Mechanics.

[34]  B. A. Toms,et al.  Some Observations on the Flow of Linear Polymer Solutions Through Straight Tubes at Large Reynolds Numbers , 1948 .

[35]  W. Willmarth,et al.  Modifying turbulent structure with drag-reducing polymer additives in turbulent channel flows , 1992, Journal of Fluid Mechanics.

[36]  S. Lele.  Compact finite difference schemes with spectral-like resolution , 1992 .

[37]  John Kim,et al.  DIRECT NUMERICAL SIMULATION OF TURBULENT CHANNEL FLOWS UP TO RE=590 , 1999 .