A triple-stacked Class-E mm-wave SiGe HBT power amplifier

A Q-band, single ended, two-stage, triple-stacked, Class-E power amplifier is designed and fabricated in a 0.13 μm SiGe HBT BiCMOS process. The Class-E amplifier comprises of three series-stacked HBTs with capacitive divider networks at the HBT bases and collectors to ensure proper large signal swing and beyond BVCEO operation at mm-wave frequencies. The measured performance of the fabricated chip show 22.2 dBm maximum output power at 20.8% peak power added efficiency, and 15.4 dB of power gain across 4 GHz centered around 40 GHz for a supply voltage of 6.5 V. The total chip area including the pads is 0.8 mm × 1.28 mm.

[1]  S. Jeng,et al.  A 0.13 m BiCMOS technology featuring a 200/280 GHz (fT/fmax) SiGe HBT , 2003 .

[2]  S. Voinigescu,et al.  A 45-GHz, 2-bit power DAC with 24.3 dBm output power, >14 Vpp differential swing, and 22% peak PAE in 45-nm SOI CMOS , 2012, 2012 IEEE Radio Frequency Integrated Circuits Symposium.

[3]  P. Gray,et al.  A 0.13 /spl mu/m BiCMOS technology featuring a 200/280 GHz (f/sub T//f/sub max/) SiGe HBT , 2003, 2003 Proceedings of the Bipolar/BiCMOS Circuits and Technology Meeting (IEEE Cat. No.03CH37440).

[4]  Harish Krishnaswamy,et al.  High power, high efficiency stacked mmWave Class-E-like power amplifiers in 45nm SOI CMOS , 2012, Proceedings of the IEEE 2012 Custom Integrated Circuits Conference.

[5]  P. Asbeck,et al.  A 34% PAE, 18.6dBm 42–45GHz stacked power amplifier in 45nm SOI CMOS , 2012, 2012 IEEE Radio Frequency Integrated Circuits Symposium.

[6]  J.D. Cressler,et al.  Reliability of SiGe HBTs for Power Amplifiers—Part I: Large-Signal RF Performance and Operating Limits , 2009, IEEE Transactions on Device and Materials Reliability.

[7]  Hossein Hashemi,et al.  A 20 dBm Q-band SiGe Class-E power amplifier with 31% peak PAE , 2012, Proceedings of the IEEE 2012 Custom Integrated Circuits Conference.