Inkjet printing of photocatalytically active TiO2 thin films from water based precursor solutions

Abstract In this work, aqueous chemical solution deposition route suited for inkjet printing is used for the synthesis of photocatalytically active TiO 2 coatings. Environmentally friendly precursor solutions with electromagnetic ink-jet printing, allows cheap and simple processing of TiO 2 films on glass. The hydrolysis reaction of water sensitive titanium alkoxide (Ti-alkoxide) precursor is controlled by adding complexing agents as citric acid and triethanolamine prior to water addition, and aqueous stable solutions are achieved. The pH of the solutions is brought to neutral to guarantee flexible processing, avoid damage to substrates and equipment. Solution parameters are adapted to obtain optimal gelation conditions and good jettability. The influence of processing parameters on the phase formation and surface morphology is studied by thermogravimetric analysis and differential thermal analysis (TGA/DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The photocatalytic activity of the films is evaluated by the degradation of methyl orange.

[1]  Crystal structure and optical property of TiO2 gels and films prepared from Ti-edta complexes as titania precursors , 2000 .

[2]  M. Grätzel.  Sol-Gel Processed TiO2 Films for Photovoltaic Applications , 2001 .

[3]  Jincai Zhao,et al.  TiO2-assisted photodegradation of dye pollutants : II. Adsorption and degradation kinetics of eosin in TiO2 dispersions under visible light irradiation , 1998 .

[4]  A. Atkinson,et al.  Continuous ink-jet printing using sol-gel “Ceramic” inks , 1997 .

[5]  I. Parkin,et al.  Characterisation of the photocatalyst Pilkington Activ (TM): a reference film photocatalyst? , 2003 .

[6]  Jiaguo Yu,et al.  Effect of film thickness on the grain size and photocatalytic activity of the sol-gel derived nanometer TiO2 thin films , 2000 .

[7]  P. V. Ashrit,et al.  Study of Anatase to Rutile Phase Transition in Nanocrystalline Titania Films , 2002 .

[8]  Yuhan Sun,et al.  Low-temperature deposition of the high-performance anatase-titania optical films via a modified sol–gel route , 2008 .

[9]  S. Yamamoto,et al.  Preparation of epitaxial TiO2 films by pulsed laser deposition technique , 2001 .

[10]  T. Ban,et al.  Aqueous Titanate Sols from Ti Alkoxide-α-Hydroxycarboxylic Acid System and Preparation of Titania Films from the Sols , 2004 .

[11]  N. Serpone,et al.  Kinetics studies in heterogeneous photocatalysis. I. Photocatalytic degradation of chlorinated phenols in aerated aqueous solutions over titania supported on a glass matrix , 1988 .

[12]  P. V. Ashrit,et al.  Study of the phase transition and the thermal nitridation of nanocrystalline sol–gel titania films , 2002 .

[13]  D. Poelman,et al.  Characterization of the aqueous peroxomethod for the synthesis of transparent TiO2 thin films , 2011 .

[14]  M. Muhammed,et al.  Photocatalytic behavior of TiO2 thin films prepared by sol-gel process , 2006 .

[15]  V. Blaskov,et al.  Study on the influence of heat treatment on the crystallographic phases of nanostructured TiO2 films , 2007 .

[16]  X. Verykios,et al.  The effect of operational parameters and TiO2-doping on the photocatalytic degradation of azo-dyes , 1999 .

[17]  Fumin Zhang,et al.  TiO2−x films prepared by ion beam assisted deposition , 2000 .

[18]  Ulrike Diebold,et al.  The surface science of titanium dioxide , 2003 .

[19]  N. Jaffrezic‐Renault,et al.  Physicochemical properties and photocatalytic activities of TiO2-films prepared by sol–gel methods , 2002 .

[20]  Dirk Poelman,et al.  Methods for the determination of the optical constants of thin films from single transmission measurements: a critical review , 2003 .

[21]  Gongxuan Lu,et al.  Photocatalytic degradation of dyes on a magnetically separated photocatalyst under visible and UV irradiation. , 2001, Chemosphere.

[22]  I. Takano,et al.  An important factor for controlling the photoreactivity of titania: O-deficiency of anatase thin films , 2008 .

[23]  J. Gómez‐Herrero,et al.  WSXM: a software for scanning probe microscopy and a tool for nanotechnology. , 2007, The Review of scientific instruments.

[24]  J. D’Haen,et al.  Preparation of nanocrystalline titania films with different porosity by water-based chemical solution deposition , 2007 .

[25]  C. Cerniglia,et al.  Mutagenicity of azo dyes: structure-activity relationships. , 1992, Mutation research.

[26]  K. K. Saini,et al.  Structural and optical properties of TiO2 thin films derived by sol–gel dip coating process , 2007 .

[27]  A. Hardy,et al.  Study of the decomposition of an aqueous metal-chelate gel precursor for (Bi, La)4Ti3O12 by means of TGA-FTIR, TGA-MS and HT-DRIFT , 2003 .

[28]  P. Falaras,et al.  Preparation, characterization and photocatalytic activity of nanocrystalline thin film TiO2 catalysts towards 3,5-dichlorophenol degradation , 2002 .

[29]  H. Tada,et al.  Dependence of TiO2 Photocatalytic Activity upon Its Film Thickness , 1997 .

[30]  S. Bach,et al.  Elaboration and characterization of thin films of TiO2 prepared by sol–gel process , 2002 .

[31]  M. Yoshimura,et al.  Direct patterning of nanostructured ceramics from solution—differences from conventional printing and lithographic methods , 2008 .

[32]  J. Gasiot,et al.  A simple method for the determination of the optical constants n, k and the thickness of a weakly absorbing thin film , 1976 .

[33]  M. Anpo,et al.  Photocatalytic decomposition of NO on titanium oxide thin film photocatalysts prepared by an ionized cluster beam technique , 2000 .

[34]  R. Swanepoel.  Determination of the thickness and optical constants of amorphous silicon , 1983 .

[35]  R. Schropp,et al.  Thickness determination of thin (∼20 nm) microcrystalline silicon layers , 2005 .

[36]  G. Marcì,et al.  Photocatalytic thin films of TiO2 formed by a sol–gel process using titanium tetraisopropoxide as the precursor , 2008 .

[37]  A. Reller,et al.  Photoinduced reactivity of titanium dioxide , 2004 .

[38]  N. Țigău,et al.  The effect of substrate temperature on the optical properties of polycrystalline Sb2O3 thin films , 2005 .

[39]  Per-Olov Käll,et al.  Optical properties of anatase TiO2 thin films prepared by aqueous sol–gel process at low temperature , 2002 .

[40]  T. Ban,et al.  Preparation and Characterization of Titania Thin Films from Aqueous Solutions , 2003 .

[41]  T. Tsuchiya,et al.  Selective deposition of anatase and rutile films by KrF laser chemical vapor deposition from titanium isopropoxide , 2002 .

[42]  Akira Fujishima,et al.  TITANIUM DIOXIDE PHOTOCATALYSIS: PRESENT SITUATION AND FUTURE APPROACHES , 2006 .

[43]  André M. Braun,et al.  Photochemical processes for water treatment , 1993 .

[44]  J. D’Haen,et al.  Synthesis of thin dense titania films via an aqueous solution-gel method , 2007 .