Dynamic buckling of steel tanks under seismic excitation: Numerical evaluation of code provisions

Many above-ground steel liquid storage tanks have suffered significant damages during past earthquakes. Such failures are due to several causes. The most common one is dynamic buckling. Several theoretical and experimental research studies were performed without solving this complex problem completely. Design codes such as AWWA-D100 and EC8 based their seismic standards on the recommendations given by some of these research results. The present contribution tries to evaluate these recommendations by using a numerical model with a robust and stable shell finite element. By using several seismic excitations and tanks with different geometrical parameter, this contribution tries to evaluate the PGA values that cause the tank instability. These numerical values are compared with standard code previsions. The obtained results confirm some code guidelines in the case of broad tanks, and show the need for improving them in the case of tall ones.

[1]  D. P. Clough.  Experimental evaluation of seismic design methods for broad cylindrical tanks , 1977 .

[2]  F. H. Hamdan.  Seismic behaviour of cylindrical steel liquid storage tanks , 2000 .

[3]  E. Hinton,et al.  The dynamic transient analysis of axisymmetric circular plates by the finite element method , 1976 .

[4]  Junji Tani,et al.  Dynamic stability of liquid-filled cylindrical shells under horizontal excitation, part I: Experiment , 1986 .

[5]  Worsak Kanok-Nukulchai,et al.  A simple and efficient finite element for general shell analysis , 1979 .

[6]  O. C. Zienkiewicz,et al.  Analysis of thick and thin shell structures by curved finite elements , 1970 .

[7]  M. A. Haroun,et al.  Analysis of Tank Damage During the 1994 Northridge Earthquake , 1995 .

[8]  Medhat A. Haroun.  Vibration studies and tests of liquid storage tanks , 1983 .

[9]  Shen R. Wu,et al.  Lumped mass matrix in explicit finite element method for transient dynamics of elasticity , 2006 .

[10]  J. Michael Rotter,et al.  Development of Proposed European Design Rules for Buckling of Axially Compressed Cylinders , 1998 .

[11]  Eduardo Manuel Sosa.  Computational buckling analysis of cylindrical thin-walled above-ground tanks , 2005 .

[12]  Akira Niwa,et al.  Buckling of cylindrical liquid-storage tanks under earthquake loading , 1982 .

[13]  K V Steinbrugge.  EARTHQUAKE DAMAGE AND STRUCTURAL PERFORMANCE IN THE UNITED STATES , 1970 .

[14]  J. Michael Rotter,et al.  Shell structures: the new European standard and current research needs , 1998 .

[15]  George C. Manos,et al.  Tank damage during the may 1983 coalinga earthquake , 1985 .

[16]  Moslem Amiri,et al.  Influence of roof on dynamic characteristics of dome roof tanks partially filled with liquid , 2012 .

[17]  E. Hinton,et al.  Efficient transient dynamic plate bending analysis with mindlin elements , 1981 .

[18]  Durgesh C. Rai,et al.  Review of Seismic Codes on Liquid-Containing Tanks , 2007 .

[19]  D. Owen,et al.  Finite elements in plasticity : theory and practice , 1980 .

[20]  S. Timoshenko.  Theory of Elastic Stability , 1936 .

[21]  Anastasios Sextos,et al.  Selection of earthquake ground motion records: A state-of-the-art review from a structural engineering perspective , 2010 .

[22]  Ehsan Ahmadi,et al.  Comparison of API650-2008 provisions with FEM analyses for seismic assessment of existing steel oil storage tanks , 2013 .

[23]  Luis A. Godoy,et al.  Dynamic buckling of anchored steel tanks subjected to horizontal earthquake excitation , 2006 .

[24]  Judah Ari-Gur,et al.  Dynamic pulse buckling of rectangular composite plates , 1997 .

[25]  J. Z. Zhu,et al.  The finite element method , 1977 .

[26]  R. A. Uras,et al.  Dynamic buckling of liquid-filled shells under horizontal excitation , 1990 .

[27]  G. Housner.  The dynamic behavior of water tanks , 1963 .

[28]  Thomas J. R. Hughes,et al.  Dynamic analysis and drilling degrees of freedom , 1995 .

[30]  Chanakya Arya,et al.  Eurocode 3: Design of steel structures , 2018, Design of Structural Elements.

[31]  A. A. El Damatty,et al.  Stability of Imperfect Steel Conical Tanks under Hydrostatic Loading , 1997 .

[32]  Praveen Malhotra.  Practical Nonlinear Seismic Analysis of Tanks , 2000 .

[33]  O. Zienkiewicz,et al.  A note on mass lumping and related processes in the finite element method , 1976 .

[34]  J. C. Simo,et al.  A return mapping algorithm for plane stress elastoplasticity , 1986 .

[35]  D. C. Barton,et al.  Finite element analysis of the seismic response of anchored and unanchored liquid storage tanks , 1987 .

[36]  Norbert Gebbeken,et al.  On the analysis of vertical circular cylindrical tanks under earthquake excitation at its base , 2003 .

[37]  A. A. El Damatty,et al.  Stability of elevated liquid‐filled conical tanks under seismic loading, Part II—applications , 1997 .

[38]  S. Natsiavas,et al.  Buckling at the Top of a Fluid-Filled Tank During Base Excitation , 1987 .

[39]  John W. Hutchinson,et al.  Dynamic buckling of imperfection-sensitive structures , 1966 .

[40]  Robert Davis Cook,et al.  Finite Element Modeling for Stress Analysis , 1995 .