Piezoresistance of conductor filled insulator composites

Several series of electrically conducting composites composed of a conducting filler randomly dispersed into an insulating polymer matrix were prepared. The fillers were the tin–lead alloy powder, copper powder, aluminium powder and carbon black, and the matrices were polyethylene, polystyrene and epoxy resin. The piezoresistance effects of these composites have been investigated under uniaxial presses. It was observed that the piezoresistance depends on the applied stress, filler particle diameter, filler volume fraction, matrix compressive modulus and potential barrier height. Piezoresistance increases with increase of applied stress, filler particle diameter and potential barrier height, but decreases with increases of filler volume fraction and matrix compressive modulus. A model based on the change in interparticle separation under applied stress, is developed. By analysing this model, the piezoresistance of composites is studied and the effects of influencing factors are theoretically predicted quantitatively, showing good agreement with the experimental data. © 2001 Society of Chemical Industry

[1]  M. Tanemura,et al.  Double percolation effect on the electrical conductivity of conductive particles filled polymer blends , 1992 .

[2]  John G. Simmons,et al.  Low‐Voltage Current‐Voltage Relationship of Tunnel Junctions , 1963 .

[3]  J. Simmons.  Electric Tunnel Effect between Dissimilar Electrodes Separated by a Thin Insulating Film , 1963 .

[4]  F. Lux,et al.  Models proposed to explain the electrical conductivity of mixtures made of conductive and insulating materials , 1993 .

[5]  Pierre Delhaes,et al.  Piezoresistivity of heterogeneous solids , 1987 .

[6]  K. T. Chung,et al.  Electrical permittivity and conductivity of carbon black‐polyvinyl chloride composites , 1982 .

[7]  Kazuyuki Ohe,et al.  A New Resistor Having An Anomalously Large Positive Temperature Coefficient , 1971 .

[8]  J. Simmons.  Generalized Formula for the Electric Tunnel Effect between Similar Electrodes Separated by a Thin Insulating Film , 1963 .

[9]  A. T. Ponomarenko,et al.  Strain sensitive polymer composite material , 1995 .

[10]  Bertil Sundqvist,et al.  Resistivity of a composite conducting polymer as a function of temperature, pressure, and environment: Applications as a pressure and gas concentration transducer , 1986 .

[11]  D. Khastgir,et al.  Pressure-sensitive electrically conductive nitrile rubber composites filled with particulate carbon black and short carbon fibre , 1990 .

[12]  R. Newnham,et al.  Piezoresistivity in Polymer‐Ceramic Composites , 1990 .

[13]  Shoko Yoshikawa,et al.  Resistivities of conductive composites , 1992 .

[14]  CONDUCTION MECHANISMS IN SOME GRAPHITE-POLYMER COMPOSITES : EFFECTS OF TEMPERATURE AND HYDROSTATIC PRESSURE , 1998 .

[15]  R. Newnham,et al.  Metal oxide-polymer thermistors , 1989 .

[16]  J. Simmons,et al.  Potential Barrier Shape Determination in Tunnel Junctions , 1963 .

[17]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[18]  Benjamin Abeles,et al.  Percolation Conductivity in W-Al 2 O 3 Granular Metal Films , 1975 .

[19]  D.D.L. Chung,et al.  TECHNICAL NOTE: A piezoresistive carbon filament polymer-matrix composite strain sensor , 1996 .