Quadrature PLL-Based High-Order Sliding-Mode Observer for IPMSM Sensorless Control With Online MTPA Control Strategy
暂无分享,去创建一个
Dianguo Xu | Guoqiang Zhang | Gaolin Wang | Yong Yu | Zhuomin Li | Dianguo Xu | Guoqiang Zhang | Gaolin Wang | Yong Yu | Zhuomin Li
[1] Ralph M. Kennel,et al. High-resolution sensorless position estimation using delta-sigma-modulated current measurement , 2011, 2011 IEEE Energy Conversion Congress and Exposition.
[2] S. Chi,et al. A Novel Sliding Mode Observer with Adaptive Feedback Gain for PMSM Sensorless Vector Control , 2007, 2007 IEEE Power Electronics Specialists Conference.
[3] Abdul Rehman Tariq,et al. Overload Considerations for Design and Operation of IPMSMs , 2010, IEEE Transactions on Energy Conversion.
[4] Casey B. Butt,et al. Simplified fuzzy logic based MTPA speed control of IPMSM drive , 2003 .
[5] R D Lorenz,et al. Evaluating the practical low speed limits for back-EMF tracking-based sensorless speed control using drive stiffness as a key metric , 2009, 2009 IEEE Energy Conversion Congress and Exposition.
[6] L. Harnefors,et al. A Combined Position and Stator-Resistance Observer for Salient PMSM Drives: Design and Stability Analysis , 2012, IEEE Transactions on Power Electronics.
[7] M.F. Rahman,et al. Low-Speed and Standstill Operation of a Sensorless Direct Torque and Flux Controlled IPM Synchronous Motor Drive , 2010, IEEE Transactions on Energy Conversion.
[8] S. Camatel,et al. A 20-Gb/s Quadrature Phase-Shift-Keying Real-Time Coherent System Based on a Subcarrier Optical Phase-Locked Loop , 2009, IEEE Photonics Technology Letters.
[9] Longya Xu,et al. Sliding-Mode Sensorless Control of Direct-Drive PM Synchronous Motors for Washing Machine Applications , 2009 .
[10] Z. Q. Zhu,et al. Investigation of Effectiveness of Sensorless Operation in Carrier-Signal-Injection-Based Sensorless-Control Methods , 2011, IEEE Transactions on Industrial Electronics.
[11] G. D. Marques,et al. New Sensorless Rotor Position Estimator of a DFIG Based on Torque Calculations—Stability Study , 2012, IEEE Transactions on Energy Conversion.
[12] F. Blaabjerg,et al. “Active Flux” DTFC-SVM Sensorless Control of IPMSM , 2009, IEEE Transactions on Energy Conversion.
[13] M.R. Iravani,et al. Estimation of frequency and its rate of change for applications in power systems , 2004, IEEE Transactions on Power Delivery.
[14] Masaru Hasegawa,et al. Improvements of speed adaptation response for IPMSM position sensorless vector control with parallel feedforward compensator , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.
[15] Seung-Ki Sul,et al. An enhanced sensorless control method for PMSM in rapid accelerating operation , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.
[16] Maria Letizia Corradini,et al. A Quasi-Sliding Mode Approach for Robust Control and Speed Estimation of PM Synchronous Motors , 2012, IEEE Transactions on Industrial Electronics.
[17] Hans-Peter Nee,et al. A general algorithm for speed and position estimation of AC motors , 2000, IEEE Trans. Ind. Electron..
[18] Rosario Miceli,et al. Back EMF Sensorless-Control Algorithm for High-Dynamic Performance PMSM , 2010, IEEE Transactions on Industrial Electronics.
[19] Muhammed Fazlur Rahman,et al. Rotor position and speed estimation of a variable structure direct torque controlled IPM synchronous motor drive at very low speeds , 2008, 2008 Australasian Universities Power Engineering Conference.
[20] S. Bolognani,et al. Automatic tracking of MTPA trajectory in IPM motor drives based on AC current injection , 2009, 2009 IEEE Energy Conversion Congress and Exposition.
[21] S.-M. Sue,et al. A linear maximum torque per ampere control for IPMSM drives over full-speed range , 2005, IEEE Transactions on Energy Conversion.
[22] Jangmyung Lee,et al. A High-Speed Sliding-Mode Observer for the Sensorless Speed Control of a PMSM , 2011, IEEE Transactions on Industrial Electronics.
[23] M.A. Hoque,et al. Simplified fuzzy-logic-based MTPA speed control of IPMSM drive , 2003, IEEE Transactions on Industry Applications.
[24] Peter Sergeant,et al. Rotor Geometry Design of Interior PMSMs With and Without Flux Barriers for More Accurate Sensorless Control , 2012, IEEE Transactions on Industrial Electronics.
[25] Shigeru Okuma,et al. An extended electromotive force model for sensorless control of interior permanent-magnet synchronous motors , 2003, IEEE Trans. Ind. Electron..
[26] Seung-Ki Sul,et al. Parameter independent maximum torque per ampere (MTPA) control of IPM machine based on signal injection , 2010, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[27] X Jannot,et al. Multiphysic Modeling of a High-Speed Interior Permanent-Magnet Synchronous Machine for a Multiobjective Optimal Design , 2011, IEEE Transactions on Energy Conversion.
[28] C M Wolf,et al. Using the Motor Drive as a Sensor to Extract Spatially Dependent Information for Motion Control Applications , 2011, IEEE Transactions on Industry Applications.
[29] Y. Mohamed,et al. Adaptive self-tuning MTPA vector controller for IPMSM drive system , 2006, IEEE Transactions on Energy Conversion.
[30] Damian Giaouris,et al. MRAS Sensorless Vector Control of an Induction Motor Using New Sliding-Mode and Fuzzy-Logic Adaptation Mechanisms , 2010, IEEE Transactions on Energy Conversion.