Analytical and numerical investigations of weld bead shape in plasma arc welding of thin Ti-6al-4v sheets

In this research work, a new analytical model has been developed to predict the temperature distribution during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s model based on a three-dimensional parabolic Gaussian heat source is considered as a plasma arc heat source moving on a semi-infinite body to derive the analytical model and the same heat source model is substituted in the three-dimensional Fourier’s law of heat conduction and implemented in the finite element package. Thermo physical properties, such as density, specific heat, and thermal conductivity, are used as temperature-dependent properties in finite element simulation. Numerical simulation is carried out using COMSOL. The new analytical model is expressed as a function of three-dimensional spatial co-ordinates and the time co-ordinate. A computer program has been written to solve the analytical model in order to obtain the distribution of transient temperature at any point of interest. The transient temperature distribution predicted by the analytical model has been compared with both the experimental result and the numerical result. Experimental work is carried out to measure the thermal cycle during welding. The thermal cycle is measured by using an infrared thermometer. Very good correlation has been obtained between the predicted transient temperature by analytical solution and the measured temperature, as well as the finite element simulation result. This provides a reliable alternative for using these analytical solutions in the future to obtain the thermal cycle, distortion, and thermal stress during plasma arc welding.

[1]  D. Rosenthal,et al.  The Theory of Moving Sources of Heat and Its Application to Metal Treatments , 1946, Journal of Fluids Engineering.

[2]  G. Langford.  Plasma Arc Welding for Large Titanium Aerospace Structures , 1966 .

[3]  Thomas W. Eagar,et al.  Temperature fields produced by traveling distributed heat sources , 1983 .

[4]  M. Donachie.  Titanium: A Technical Guide , 1988 .

[5]  Hyungsuck Cho,et al.  Transient Temperature Distribution in Arc Welding of Finite Thickness Plates , 1990 .

[6]  Tapani Moisio,et al.  Investigation of the effect of welding parameters on weld quality of plasma arc keyhole welding of structural steels , 1993 .

[7]  E. Collings,et al.  Materials Properties Handbook: Titanium Alloys , 1994 .

[8]  A unified approach to closed-form solutions of moving heat-source problems , 1998 .

[9]  Naoyuki Suzuki,et al.  Analytical solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources , 1999 .

[10]  Kuang-Hung Tseng,et al.  Effect of process parameters of micro-plasma arc welding on morphology and quality in stainless steel edge joint welds , 2003 .

[11]  YuMing Zhang,et al.  A new heat source model for keyhole plasma arc welding in FEM analysis of the temperature profile , 2006 .

[12]  Pradip Majumdar,et al.  A Green’s function model for the analysis of laser heating of materials , 2007 .

[13]  Chuansong Wu,et al.  An adaptive heat source model for finite-element analysis of keyhole plasma arc welding , 2009 .

[14]  Franco Bonollo,et al.  Erratum to: A Semianalytical Thermal Model for Friction Stir Welding , 2010 .

[15]  A. A. Deshpande,et al.  Finite element-based analysis of experimentally identified parametric envelopes for stable keyhole plasma arc welding of a titanium alloy , 2012 .

[16]  M. A. Daha.  NUMERICAL MODELING OF HEAT TRANSFER AND FLUID FLOW IN KEYHOLE PLASMA ARC WELDING OF DISSIMILAR STEEL JOINTS , 2012 .

[17]  M. A. Daha,et al.  Three-Dimensional Thermal Finite Element Modeling for Keyhole Plasma Arc Welding of 2205 Duplex Stainless Steel Plates , 2012 .

[18]  Radovan Kovacevic,et al.  Numerical Modeling of Heat Distribution in the Electron Beam Melting® of Ti-6Al-4V , 2013 .

[19]  S. Hassanifard,et al.  Analytical solution of temperature distribution in resistance spot welding , 2015 .

[20]  Yang Lei,et al.  A kind of analytical model of arc welding temperature distribution under varying material properties , 2015 .

[21]  C. Wu,et al.  Numerical simulation of plasma arc welding with keyhole-dependent heat source and arc pressure distribution , 2015 .

[22]  Mohammad Haghpanahi,et al.  Analytical model for the temperature field around a nonuniform three-dimensional moving heat source: friction stir welding modelling , 2016 .

[23]  N. Shanmugam,et al.  Some studies on temperature field during plasma arc welding of thin titanium alloy sheets using parabolic Gaussian heat source model , 2017 .