Continuous wave vs pulsed wave laser emission in selective laser melting of AlSi10Mg parts with industrial optimized process parameters: Microstructure and mechanical behaviour

[1]  R. Willens,et al.  DEFECTS IN ALUMINUM QUENCHED FROM THE LIQUID STATE. Technical Report No. 15 , 1963 .

[2]  P. Cote,et al.  Non-isothermal transformation kinetics: Application to metastable phases , 1983 .

[3]  T. H. Keijser,et al.  On precipitation in rapidly solidified aluminium-silicon alloys , 1983 .

[4]  A. Ortega,et al.  Non-isothermal transformation kinetics: Remarks on the Kissinger method , 1986 .

[5]  E. Mittemeijer,et al.  Precipitation of silicon in aluminum-silicon: A calorimetric analysis of liquid-quenched and solid- quenched alloys , 1989 .

[6]  M. Starink.  On the applicability of isoconversion methods for obtaining the activation energy of reactions within a temperature-dependent equilibrium state , 1997 .

[7]  C. Sutcliffe,et al.  Investigation on Multi-Layer Direct Metal Laser Sintering of 316L Stainless Steel Powder Beds , 1999 .

[8]  APPROACHES TO PROCESSING METALS AND CERAMICS THROUGH THE LASER SCANNING OF POWDER BEDS - A REVIEW , 2001 .

[9]  P. Fox,et al.  High density net shape components by direct laser re-melting of single-phase powders , 2002 .

[10]  Marco J. Starink,et al.  The determination of activation energy from linear heating rate experiments: a comparison of the accuracy of isoconversion methods , 2003 .

[11]  Rémy Glardon,et al.  Temperature measurements during selective laser sintering of titanium powder , 2004 .

[12]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[13]  K. Osakada,et al.  Rapid Manufacturing of Metal Components by Laser Forming , 2006 .

[14]  Jan Bültmann,et al.  High Power Selective Laser Melting (HP SLM) of Aluminum Parts , 2011 .

[15]  Stewart Williams,et al.  Comparison of continuous wave and pulsed wave laser welding effects , 2013 .

[16]  I. Ashcroft,et al.  Reducing porosity in AlSi10Mg parts processed by selective laser melting , 2014 .

[17]  Wei Liu,et al.  Balling phenomena in selective laser melted tungsten , 2015 .

[18]  E. O. Olakanmi,et al.  A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties , 2015 .

[19]  R. Poprawe,et al.  Selective laser melting of aluminum die-cast alloy—Correlations between process parameters, solidification conditions, and resulting mechanical properties , 2015 .

[20]  Wei Wang,et al.  Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development , 2015, Materials & Design (1980-2015).

[21]  F. M. Ghaini,et al.  Hot cracking in laser welding of Hastelloy X with pulsed Nd:YAG and continuous wave fiber lasers , 2016 .

[22]  Xinhua Wu,et al.  The influence of processing parameters on aluminium alloy A357 manufactured by Selective Laser Melting , 2016 .

[23]  Comparison study of numerical analysis for heat transfer and fluid flow under two different laser scan pattern during selective laser melting , 2016 .

[24]  T. Nakamoto,et al.  Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting , 2016 .

[25]  Zhiheng Hu,et al.  Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties , 2016 .

[26]  Xueping Ding,et al.  Heat transfer and fluid flow of molten pool during selective laser melting of AlSi10Mg powder: Simulation and experiment , 2017 .

[27]  L. Quintino,et al.  Fundamental understanding of the interaction of continuous wave laser with aluminium , 2017 .

[28]  J. Fiocchi,et al.  Effect of ball milling on the ageing response of Al2618 composites reinforced with SiC and oxide nanoparticles , 2017 .

[29]  A. Demir,et al.  From pulsed to continuous wave emission in SLM with contemporary fiber laser sources: effect of temporal and spatial pulse overlap in part quality , 2017, The International Journal of Advanced Manufacturing Technology.

[30]  Sen Wang,et al.  Experimental investigation on densification behavior and surface roughness of AlSi10Mg powders produced by selective laser melting , 2017 .

[31]  Carlo Alberto Biffi,et al.  Low temperature annealing dedicated to AlSi10Mg selective laser melting products , 2017 .

[32]  C. Biffi,et al.  Selective laser melting of AlSi10 Mg: Influence of process parameters on Mg2Si precipitation and Si spheroidization , 2018, Journal of Alloys and Compounds.

[33]  A. Demir,et al.  Comparative study between CW and PW emissions in selective laser melting , 2018, Journal of Laser Applications.