Acid-Soluble Thixotropic Cement System for Lost Circulation Challenges

Lost circulation is a recurring and costly challenge for the oil and gas industry. Losses range from seepage to total and financial effects, including nonproductive time and remedial operational expenses, which can increase potential risks to the operator. To address this issue, a tunable cement-based lost circulation treatment solution has been developed that is most suitable for partial to total losses, particularly when particulate-based solutions are not effective; the solution is primarily intended to cure losses while drilling. Unlike conventional lost circulation materials (LCMs) that cure losses by mechanical bridging of particles, the thixotropic cement solution's effectiveness arises from its unique chemical composition, which is ideal when flow paths are too large to be plugged by particles. The new lost circulation treatment solution is thixotropic with a density range of 10 to 15 lbm/gal working in temperatures up to 250°F. The formulation can be mixed with fresh water, seawater, or seawater with up to 14% NaCl. It is designed and tested in accordance with API RP 10B2 (2013) procedures for thickening time (TT), compressive strength, static gel strength, fluid loss, and rheology. During the TT on-off-on test, the formulation builds gel strength when shear is reduced and regains fluidity when shear is reapplied. The formulation developed rapid static gel strength and an early compressive strength up to 500 psi. The reversible gelation behavior is demonstrated through multiple shear on-off cycles. This solution is operationally convenient to apply because it can be pumped through the bottomhole assembly (BHA), thus reducing trip times. Because of its acid solubility, it can be used across production zones. The unique properties of gaining rapid gel strength reversibly and a good compressive strength render this solution effective for treating a wide range of lost circulation events during drilling. A wider density window might minimize the potential risk of inflow when treating losses.