Novel ancillary device for minimising machining vibrations in thin wall assemblies
暂无分享,去创建一个
[1] Dragos Axinte,et al. Coupled interaction of dynamic responses of tool and workpiece in thin wall milling , 2013 .
[2] Yusuf Altintas,et al. Analytical Prediction of Chatter Stability in Milling—Part I: General Formulation , 1998 .
[3] Shreyes N. Melkote,et al. Analysis of the effects of fixture clamping sequence on part location errors , 2004 .
[4] Shreyes N. Melkote,et al. Modeling of Workpiece Location Error Due to Fixture Geometric Error and Fixture-Workpiece Compliance , 2005 .
[5] Keith Ridgway,et al. Particle Dampers for Workpiece Chatter Mitigation , 2005 .
[6] Neil D. Sims,et al. Milling workpiece chatter avoidance using piezoelectric active damping: a feasibility study , 2005 .
[7] Shreyes N. Melkote,et al. Prediction of workpiece deformation in a fixture system using the finite element method , 2006 .
[8] Yan Wang,et al. Deformation Analysis of Fixturing for Workpiece with Complex Geometry , 2005 .
[9] Youlun Xiong,et al. A novel approach to fixture design on suppressing machining vibration of flexible workpiece , 2012 .
[10] Adib A. Becker,et al. A solution for minimising vibrations in milling of thin walled casings by applying dampers to workpiece surface , 2013 .
[11] Adib A. Becker,et al. Vibration suppression and coupled interaction study in milling of thin wall casings in the presence of tuned mass dampers , 2014 .