Flux weakening control algorithm with MTPA control of PMSM drive

This paper presents flux weakening control algorithm with maximum torque per ampere (MTPA) control for high speed operation of PMSM drive. IPMSM has been used due to the robust construction and extra reluctance torque production as compared to the surface permanent magnet synchronous motor. Based on the speed command the mode of operation will automatically change from constant torque region to flux weakening region. Flux weakening control algorithm has been developed for the purpose of high speed operation. This algorithm has been developed by considering maximum torque per ampere without exceeding the voltage limit and current limit. The performance study has been carried out in terms of MTPA control as well as flux weakening control of IPMSM drive.

[1]  S. Sul,et al.  Design of Flux Observer Robust to Interior Permanent-Magnet Synchronous Motor Flux Variation , 2009, IEEE Transactions on Industry Applications.

[2]  R. Krishnan,et al.  Electric Motor Drives: Modeling, Analysis, and Control , 2001 .

[3]  Seung-Ki Sul,et al.  Speed control of interior permanent magnet synchronous motor drive for the flux weakening operation , 1997 .

[4]  Shigeo Morimoto,et al.  Wide-speed operation of interior permanent magnet synchronous motors with high-performance current regulator , 1994 .

[5]  Ching-Tsai Pan,et al.  Voltage-Constraint-Tracking-Based Field-Weakening Control of IPM Synchronous Motor Drives , 2008, IEEE Transactions on Industrial Electronics.

[6]  G. Scelba,et al.  Steady-State and Transient Operation of IPMSMs Under Maximum-Torque-per-Ampere Control , 2010, IEEE Transactions on Industry Applications.

[7]  Bimal K. Bose.  A high-performance inverter-fed drive system of an interior permanent magnet synchronous machine , 1987 .

[8]  Y. Mohamed,et al.  Adaptive self-tuning MTPA vector controller for IPMSM drive system , 2006, IEEE Transactions on Energy Conversion.

[9]  Thomas M. Jahns,et al.  Flux-Weakening Regime Operation of an Interior Permanent-Magnet Synchronous Motor Drive , 1987, IEEE Transactions on Industry Applications.

[10]  Seung-Ki Sul,et al.  Speed control of interior permanent magnet synchronous motor drive for flux weakening operation , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[11]  Bimal K. Bose,et al.  Modern Power Electronics and AC Drives , 2001 .

[12]  Seung-Ki Sul,et al.  Maximum Torque per Ampere (MTPA) Control of an IPM Machine Based on Signal Injection Considering Inductance Saturation , 2013, IEEE Transactions on Power Electronics.

[13]  M. F. Rahman,et al.  A direct torque controlled interior permanent magnet synchronous motor drive incorporating field weakening , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.