Efficiency analysis of wide band-gap semiconductors for two-level and three-level power converters

Power devices based on wide band-gap materials are emerging as alternatives to silicon-based devices. These new devices allow designing and building converters with fewer power losses, and are thus more highly efficient than traditional power converters. Among the wide band-gap materials in use, silicon carbide (SiC) and gallium nitride (GaN) devices are the most promising because of their excellent properties and commercial availability. This paper compares the losses produced in two-level and three-level power converters that use the aforementioned technologies. In addition, we assess the impact on the converter performance caused by the modulation technique. Simulation results under various operating points are reported and compared.

[1]  D. Boroyevich,et al.  A Carrier-Based PWM Strategy With Zero-Sequence Voltage Injection for a Three-Level Neutral-Point-Clamped Converter , 2012, IEEE Transactions on Power Electronics.

[2]  Juncheng Lu,et al.  Parasitic capacitance Eqoss loss mechanism, calculation, and measurement in hard-switching for GaN HEMTs , 2018, 2018 IEEE Applied Power Electronics Conference and Exposition (APEC).

[3]  Philippe Godignon,et al.  A Survey of Wide Bandgap Power Semiconductor Devices , 2014, IEEE Transactions on Power Electronics.

[4]  J. Bertomeu.  Modulation strategies for the neutral-point-clamped converter and control of a wind turbine system , 2011 .

[5]  T. Chow.  Wide bandgap semiconductor power devices for energy efficient systems , 2015, 2015 IEEE 3rd Workshop on Wide Bandgap Power Devices and Applications (WiPDA).

[6]  P. Rodriguez,et al.  Comparative efficiency study of single phase photovoltaic grid connected inverters using PLECS® , 2015, 2015 International Congress on Technology, Communication and Knowledge (ICTCK).

[8]  S. Decoutere,et al.  Au-free CMOS-compatible AlGaN/GaN HEMT processing on 200 mm Si substrates , 2012, 2012 24th International Symposium on Power Semiconductor Devices and ICs.

[9]  F. Wang,et al.  Review of Commercial GaN Power Devices and GaN-Based Converter Design Challenges , 2016, IEEE Journal of Emerging and Selected Topics in Power Electronics.

[10]  T. Chow.  Progress in High Voltage SiC and GaN Power Switching Devices , 2014 .

[11]  B. Ozpineci.  Comparison of Wide-Bandgap Semiconductors for Power Electronics Applications , 2004 .

[12]  Di Chen,et al.  Opportunities and design considerations of GaN HEMTs in ZVS applications , 2018, 2018 IEEE Applied Power Electronics Conference and Exposition (APEC).

[13]  R. S. Pengelly,et al.  A Review of GaN on SiC High Electron-Mobility Power Transistors and MMICs , 2012, IEEE Transactions on Microwave Theory and Techniques.

[14]  Thomas A. Lipo,et al.  A high-performance generalized discontinuous PWM algorithm , 1998 .

[15]  J. Pou,et al.  Improving capacitor voltage ripples and power losses of modular multilevel converters through discontinuous modulation , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.