An enhanced beam-theory model of the mixed-mode bending (MMB) test—Part I: Literature review and mechanical model

[1]  Julien Jumel,et al.  Instrumented End Notched Flexure – Crack propagation and process zone monitoring. Part I: Modelling and analysis , 2013 .

[2]  S. Bennati,et al.  An enhanced beam-theory model of the mixed-mode bending (MMB) test—Part II: Applications and results , 2013, Meccanica.

[3]  S. Bennati,et al.  An enhanced beam-theory model of the mixed-mode bending (MMB) test—Part II: Applications and results , 2013 .

[4]  A. Morais.  Novel cohesive beam model for the End-Notched Flexure (ENF) specimen , 2011 .

[5]  José Xavier,et al.  Mixed-mode I/II wood fracture characterization using the mixed-mode bending test , 2010 .

[6]  Paolo Sebastiano Valvo,et al.  An enhanced beam-theory model of the asymmetric double cantilever beam (ADCB) test for composite laminates , 2009 .

[7]  L. J. Sluys,et al.  A phantom node formulation with mixed mode cohesive law for splitting in laminates , 2009 .

[8]  Christian Berggreen,et al.  On the analysis of a mixed mode bending sandwich specimen for debond fracture characterization , 2009 .

[9]  F. López,et al.  Determination of the mixed-mode fracture energy of elastomeric structural adhesives: evaluation of debonding buckling in fibre–metal hybrid laminates , 2009 .

[10]  P. Valvo.  Does Shear Deformability Influence the mode II Delamination of Laminated Beams , 2013 .

[11]  Peter Davies,et al.  A status report on delamination resistance testing of polymer-matrix composites , 2008 .

[12]  V. Parameswaran,et al.  Energy release rate for interlaminar cracks in graded laminates , 2008 .

[13]  T. Aoki,et al.  Correction method for evaluation of interfacial fracture toughness of DCB, ENF and MMB specimens with residual thermal stresses , 2008 .

[14]  G. Lecca,et al.  Modelling of delamination growth in composite laminates by the virtual internal bond method , 2008 .

[15]  A. Morais,et al.  Mixed mode I + II interlaminar fracture of carbon/epoxy laminates , 2008 .

[16]  M. G. Andrews,et al.  The effects of shear and near tip deformations on energy release rate and mode mixity of edge-cracked orthotropic layers , 2007 .

[17]  A. Szekrényes.  Improved analysis of unidirectional composite delamination specimens , 2007 .

[18]  Davide Tumino,et al.  Simulation of Fatigue Delamination Growth in Composites with Different Mode Mixtures , 2007 .

[19]  José Morais,et al.  Numerical analysis of the MMB test for mixed-mode I/II wood fracture , 2007 .

[20]  A. Morais,et al.  Interlaminar fracture of multidirectional glass/epoxy laminates under mixed-mode I + II loading , 2007 .

[21]  A. Pasta,et al.  An analysis of interface delamination mechanisms in orthotropic and hybrid fiber-metal composite laminates , 2007 .

[22]  R. Tenchev,et al.  A correction to the analytical solution of the mixed-mode bending (MMB) problem , 2007 .

[23]  Pedro P. Camanho,et al.  A damage model for the simulation of delamination in advanced composites under variable-mode loading , 2006 .

[24]  A. Morais,et al.  Mixed mode I + II interlaminar fracture of glass/epoxy multidirectional laminates – Part 1: Analysis , 2006 .

[25]  A. Morais,et al.  Mixed mode I + II interlaminar fracture of glass/epoxy multidirectional laminates – Part 2: Experiments , 2006 .

[26]  J. J. Cheng,et al.  Revisit the analysis of end-notched-flexure (ENF) specimen , 2006 .

[27]  A. Turón,et al.  An exact solution for the determination of the mode mixture in the mixed-mode bending delamination test , 2006 .

[28]  J. Williams,et al.  The root rotation in double cantilever beam and peel tests , 2006 .

[29]  Lorenzo Iannucci,et al.  Dynamic delamination modelling using interface elements , 2006 .

[30]  A. Szekrényes,et al.  Comparison of some improved solutions for mixed-mode composite delamination coupons , 2006 .

[31]  Antonio Miravete,et al.  Application of the Finite-Element Method to Predict the Onset of Delamination Growth , 2004 .

[32]  Larsgunnar Nilsson,et al.  Simulating DCB, ENF and MMB experiments using shell elements and a cohesive zone model , 2004 .

[33]  P. Qiao,et al.  Novel beam analysis of end notched flexure specimen for mode-II fracture , 2004 .

[34]  Marion Kee,et al.  Analysis , 2004, Machine Translation.

[35]  Nicholas A. Warrior,et al.  Mixed‐Mode Delamination – Experimental and Numerical Studies , 2003 .

[36]  P. Camanho,et al.  Numerical Simulation of Mixed-Mode Progressive Delamination in Composite Materials , 2003 .

[37]  A. Mayer,et al.  Influence of fiber direction and mixed-mode ratio on delamination fracture toughness of carbon/epoxy laminates , 2003 .

[38]  Tong Earn Tay,et al.  Characterization and analysis of delamination fracture in composites: An overview of developments from 1990 to 2001 , 2003 .

[39]  Antonio Miravete,et al.  Application of the finite element method to prediction of onset of delamination growth , 2002 .

[40]  Paolo Vannucci,et al.  A special class of uncoupled and quasi-homogeneous laminates , 2001 .

[41]  Y. Yum,et al.  Pure Mode I, II and Mixed Mode Interlaminar Fracture of Graphite/Epoxy Composite Materials , 2001 .

[42]  R. Cox.  Unusual Characteristics of Mixed-Mode Delamination Fracture in the Presence of Large-Scale Bridging , 2001 .

[43]  R. R. James,et al.  Refinements to the Mixed-Mode Bending Test for Delamination Toughness , 2000 .

[44]  P. Davies,et al.  Mixed mode failure criteria for a glass/epoxy composite and an adhesively bonded composite/composite joint , 2000 .

[45]  P A Smith,et al.  ON THE APPLICATION OF FRACTURE MECHANICS TO COMPOSITE MATERIALS , 2000 .

[46]  W. Soboyejo,et al.  A modified mixed‐mode bending specimen for the interfacial fracture testing of dissimilar materials , 1999 .

[47]  G. Hinrichsen,et al.  A modification of the mixed-mode bending test apparatus , 1999 .

[48]  L. Carlsson,et al.  Beam analysis of angle-ply laminate mixed-mode bending specimens , 1999 .

[49]  P. Davies,et al.  A mixed-mode failure criterion derived from tests on symmetric and asymmetric specimens , 1999 .

[50]  Jr. J. Crews,et al.  A Mixed-Mode Bending Apparatus for Delamination Testing , 1998 .

[51]  Peter Davies,et al.  An experimental study to validate tests used to determine mixed mode failure criteria of glass/epoxy composites , 1997 .

[52]  M. Benzeggagh,et al.  Mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites under fatigue loading , 1997 .

[53]  Alberto Corigliano,et al.  Modeling and simulation of crack propagation in mixed-modes interlaminar fracture specimens , 1996 .

[54]  B. Davidson,et al.  Evaluation of Data Reduction Methods for the Mixed Mode Bending Test , 1996 .

[55]  M. Benzeggagh,et al.  Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus , 1996 .

[56]  J. G. Williams,et al.  The mixed-mode delamination of fibre composite materials , 1993 .

[57]  Alberto Corigliano,et al.  Formulation, identification and use of interface models in the numerical analysis of composite delamination , 1993 .

[58]  J. H. Crews,et al.  Redesign of the Mixed-Mode Bending Delamination Test to Reduce Nonlinear Effects , 1992 .

[59]  J. Reeder,et al.  An Evaluation of Mixed-Mode Delamination Failure Criteria , 1992 .

[60]  J. G. Williams,et al.  Corrections for mode II fracture toughness specimens of composites materials , 1992 .

[61]  O. Allix,et al.  Interlaminar interface modelling for the prediction of delamination , 1992 .

[62]  J. R. Reeder,et al.  Nonlinear Analysis and Redesign of the Mixed-Mode Bending Delamination Test , 1991 .

[63]  Jr. J. Crews,et al.  Mixed-Mode Bending Method for Delamination Testing , 1990 .

[64]  Anthony J. Kinloch,et al.  The analysis of interlaminar fracture in uniaxial fibre-polymer composites , 1990, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[65]  O. Ishai,et al.  Interlaminar fracture toughness and toughening of laminated composite materials: a review , 1989 .

[66]  J. Williams.  End corrections for orthotropic DCB specimens , 1989 .

[67]  Amar C. Garg,et al.  Delamination—a damage mode in composite structures , 1988 .

[68]  Leif A. Carlsson,et al.  Experimental characterization of advanced composite materials , 1987 .

[69]  John W. Gillespie,et al.  On the Analysis and Design of the End Notched Flexure (ENF) Specimen for Mode II Testing , 1986 .

[70]  M. F. Kanninen,et al.  An augmented double cantilever beam model for studying crack propagation and arrest , 1973, International Journal of Fracture.