The AEROARMS Project: Aerial Robots with Advanced Manipulation Capabilities for Inspection and Maintenance

This article summarizes new aerial robotic manipulation technologies and methods-aerial robotic manipulators with dual arms and multidirectional thrusters-developed in the AEROARMS project for outdoor industrial inspection and maintenance (I&M).

[1]  Konstantin Kondak,et al.  Passive Compliance Control of Aerial Manipulators , 2018, 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[2]  Antonio Franchi,et al.  Differential flatness and control of protocentric aerial manipulators with any number of arms and mixed rigid-/elastic-joints , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[3]  Antonio Franchi,et al.  6D physical interaction with a fully actuated aerial robot , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[4]  F. Pierri,et al.  Coordinated Control of Aerial Robotic Manipulators: Theory and Experiments , 2018, IEEE Transactions on Control Systems Technology.

[5]  Francesc Moreno-Noguer,et al.  Boosted Random Ferns for Object Detection , 2018, IEEE Transactions on Pattern Analysis and Machine Intelligence.

[6]  Aníbal Ollero,et al.  A multilayer control for multirotor UAVs equipped with a servo robot arm , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[7]  Sami Haddadin,et al.  External Wrench Estimation, Collision Detection, and Reflex Reaction for Flying Robots , 2017, IEEE Transactions on Robotics.

[8]  Francesc Moreno-Noguer,et al.  PL-SLAM: Real-time monocular visual SLAM with points and lines , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[9]  Paolo Robuffo Giordano,et al.  A visual-based shared control architecture for remote telemanipulation , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[10]  Antonio Franchi,et al.  Control-Aware Motion Planning for Task-Constrained Aerial Manipulation , 2018, IEEE Robotics and Automation Letters.

[11]  Aaron M. Dollar,et al.  Grasping from the air: Hovering capture and load stability , 2011, 2011 IEEE International Conference on Robotics and Automation.

[12]  Matko Orsag,et al.  Flight stability in aerial redundant manipulators , 2012, 2012 IEEE International Conference on Robotics and Automation.

[13]  Stefano Stramigioli,et al.  Compliant Aerial Manipulators: Toward a New Generation of Aerial Robotic Workers , 2016, IEEE Robotics and Automation Letters.

[14]  Mirko Kovac,et al.  3D printing with flying robots , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[15]  Lorenzo Marconi,et al.  Developing an Aerial Manipulator Prototype: Physical Interaction with the Environment , 2014, IEEE Robotics & Automation Magazine.

[16]  J. M. M. Montiel,et al.  ORB-SLAM: A Versatile and Accurate Monocular SLAM System , 2015, IEEE Transactions on Robotics.

[17]  Vincenzo Lippiello,et al.  Uncalibrated Visual Servo for Unmanned Aerial Manipulation , 2017, IEEE/ASME Transactions on Mechatronics.

[18]  Aníbal Ollero,et al.  Control of a multirotor outdoor aerial manipulator , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[19]  Vijay Kumar,et al.  Toward autonomous avian-inspired grasping for micro aerial vehicles , 2014, Bioinspiration & biomimetics.

[20]  Guillermo Heredia,et al.  Physical-Virtual Impedance Control in Ultralightweight and Compliant Dual-Arm Aerial Manipulators , 2018, IEEE Robotics and Automation Letters.

[21]  Vijay Kumar,et al.  Cooperative manipulation and transportation with aerial robots , 2009, Auton. Robots.

[22]  Suseong Kim,et al.  Aerial grasping of cylindrical object using visual servoing based on stochastic model predictive control , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[23]  Aníbal Ollero,et al.  Impedance Control of an aerial-manipulator: Preliminary results , 2016, 2016 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[24]  Kristin Ytterstad Pettersen,et al.  Set-Based Tasks within the Singularity-Robust Multiple Task-Priority Inverse Kinematics Framework: General Formulation, Stability Analysis, and Experimental Results , 2016, Front. Robot. AI.

[25]  Alin Albu-Schäffer,et al.  The OOS-SIM: An on-ground simulation facility for on-orbit servicing robotic operations , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[26]  Dongjun Lee,et al.  Aerial tool operation system using quadrotors as Rotating Thrust Generators , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[27]  Ji Zhang,et al.  LOAM: Lidar Odometry and Mapping in Real-time , 2014, Robotics: Science and Systems.

[28]  Matko Orsag,et al.  Towards valve turning using a dual-arm aerial manipulator , 2014, 2014 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[29]  Suseong Kim,et al.  Operating an unknown drawer using an aerial manipulator , 2015, 2015 IEEE International Conference on Robotics and Automation (ICRA).

[30]  Anibal Ollero,et al.  Characterization of the Aerodynamic Ground Effect and Its Influence in Multirotor Control , 2017 .

[31]  Stefano Stramigioli,et al.  Application of substantial and sustained force to vertical surfaces using a quadrotor , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[32]  Francesc Moreno-Noguer,et al.  On-board real-time pose estimation for UAVs using deformable visual contour registration , 2014, 2014 IEEE International Conference on Robotics and Automation (ICRA).

[33]  Allison M. Okamura,et al.  Haptic Virtual Fixtures for Robot-Assisted Manipulation , 2005, ISRR.

[34]  Antonio Franchi,et al.  Adaptive closed-loop speed control of BLDC motors with applications to multi-rotor aerial vehicles , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[35]  Margarita Chli,et al.  Towards Globally Consistent Visual-Inertial Collaborative SLAM , 2018, ICRA 2018.

[36]  David J. Cappelleri,et al.  Design of the I-BoomCopter UAV for environmental interaction , 2017, 2017 IEEE International Conference on Robotics and Automation (ICRA).